This pack comes with the industry-leading -155 dBc PIM compliant DAS antenna. This features an ultra-thin, see-through design allows the product to be nearly invisible when mounted, yet provides industry-leading increases for in-building coverage and capacity. The antenna housing’s translucent design makes it ideal for deployment in hotels, convention centres and other venues where aesthetics are of primary importance.
The Pulse Clarity Series DAS in-building low PIM omni antenna meets the most demanding PIM requirements for 2G, 3G, 4G (LTE) and WiFi bands.
The Cel-Fi GO2 for Optus Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within your building. Supporting voice and mobile internet for multiple mobile devices, boosting your indoor mobile coverage has never been easier.
The Cel-Fi GO2 Smart Signal Repeater, the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 70-100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO2 leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO2 is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties, government buildings, agricultural settings, small manufacturing operations, rural areas, businesses, and large homes.
- 3G / 4G / 4GX Voice and Data
- Up to 15,000 ft2 (1,500 m2) of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
Cel-Fi is the only consumer mobile phone repeater that has been widely approved by all mobile carriers in Australia. Currently approved for use on the Optus mobile networks, Cel-Fi GO2 is a new type of mobile enhancement device called a Smart Repeater. There are other non-compliant consumer repeaters that appear to be from Australia, buying non Cel-Fi repeaters may result in large fines and loss of the equipment.
What is a Smart Repeater?
A Smart Repeater is a new type of mobile phone repeater that is designed to complement an existing mobile network and not interfere with its operation. It does this by monitoring the base station levels in real time, only repeating the signal of one particular carrier and having inbuilt protection to ensure it does not overload or interfere with network operation. Cel-Fi GO2 is currently the only Smart Repeater in existence.
Increases Mobile Data Speeds
Slow internet speeds on your mobile device are often caused by low signal. If you suffer from low signal on the go, you will be able to relate to the frustration of trying to access email or the internet. Cel-Fi GO2 will amplify the available LTE or HSPA mobile signal and increase your data speeds.
Note: The 4G/LTE Bands can only be utilised for data (not calls) unless both the smart phone and the local network support Voice over LTE (VoLTE)
Extends Mobile Phone battery life
Mobile phones use a lot more energy when in poor signal areas. The phone adjusts its internal power to compensate in an attempt to boost the poor signal. As a result the phone will consume a lot more battery power. Using the Cel-Fi GO2 system your indoor mobile signal should be high and the battery will last noticeably longer for you to talk. check Facebook and browse the internet.
Eliminate Dropped or Missed Calls
Never miss or lose an important call because of coverage issues again. The Cel-Fi GO2 will provide continuous coverage throughout your home or office, so you can be contacted when required. No longer do you have to put up with calls dropping out or terminating during conversation.
Introduction Video:
FEATURES
- Designed for building and site
- 100dB of system gain
- Includes external and internal antennas
- Locked to Optus'Mobile Network
- ACMA and Carrier approved
Important Feature
Cel-Fi GO2 boosts 3G (900/2100) and 4G (1800/2100/2600) at the same time
SUPPORTED NETWORKS
Optus, TPG, Amaysim, Dodo, iiNet, plus more
How does the customer activate the unit?
1. Download the WAVE App from the Apple or Android store
Run the App next to the Cel-Fi GO2 and it will connect via Bluetooth. Power up GO2 and connect using WAVE App to register
2. Once connected it will pop up with the registration form to complete. Note this form is much shorter than the original web-based form
3. Complete and submit the form
4. The unit will now be active within 30 seconds
IMPORTANT: Internet access is required to run the WAVE app
SPECS
Cellular bands
- 3G 900/2100 MHz & 4G 1800/2100/2600 MHz
Power
- 12 DVC via external supply
- External supply: 100 to 240 VAC, 47-63Hz
- Power consumption less than 15W per unit
Antenna requirements
- SMA Female Outdoor Antenna Connector
- SMA Female Indoor Antenna Connector
- Approved antenna are supplied with the units
Manufacturer
- Nextivity
Model
- Cel-Fi Go2
Antenna Port
- 2 x SMA Female
Optional Outdoor Antenna Package
LPDA Outdoor Antenna Pack includes:
- Pulse Clarity Series DAS in-building low PIM omni antenna include a 50cm pigtail with N female connector
- Outdoor LPDA 698-4000, 12/14dBi
- 10m LMR240 cable x 2
- 240Vac Power Supply adapter, 12Vdc
Omni Outdoor High Gain Antenna Pack includes:
- Pulse Clarity Series DAS in-building low PIM omni antenna include a 50cm pigtail with N female connector
- outdoor Omni High Gain Antenna, 698-2700 6dBi
- 10m LMR240 cable x 2
- 240Vac Power Supply adapter, 12Vdc
