Made exclusively for the Cel-Fi PRO mobile signal repeater model, the Cel-Fi PRO-X enables the connection of the Network Unit and Coverage Unit using a cable link.

• Extends the range between network and coverage units
• Provides a way to pass the signal through solid walls
• Requires cable with SMA Male connectors on each end
• Includes Sleeve-style harness for network unit and Snap-On adapter for coverage unit
• Compatible with Cel-Fi PRO mounting brackets
• No additional power required

Note: The 5GHz wireless link is not turned off when using the PRO-X, with the separation between the two units still required.

PRO-X includes two passive RF sleeves that attach to both the network and coverage units. A RF cable then provides a link to join the two sleaves together. The system is completely passive and does not require power. The benefit of PRO-X is that the coverage unit can be positioned further away from the network unit, and the PRO can be setup in a building with walls that do not allow an RF signal penetration. Please note that the 5GHz wireless link is not turned off when using the PRO-X, with the separation between the two units still required.

*Any cable may be used providing it satisfies the cable specifications below
• 50 ohm Impedance
• SMA Male connectors at each end
• Cable loss should be less than 40 dB @ 6GHz.

The following table will assist in determining the estimated distance achievable between the Network and Coverage Units: