KAS Z-Wave remote control door keypad Lock with handle Mark 2



This variant is sold out please select another

  • KAS Z-Wave remote control door keypad Lock with handle Mark 2
  • KAS Z-Wave remote control door keypad Lock with handle Mark 2
  • KAS Z-Wave remote control door keypad Lock with handle Mark 2
  • KAS Z-Wave remote control door keypad Lock with handle Mark 2

Customer Reviews

No reviews yet Write a review

Quick Overview

KAS Z-Wave Keypad Lock offers the flexible versatility of a wireless and keyless locking solution.  The lock is integrated with the popular Z-Wave network protocol which can be integrated into automation building solutions.  It features a Master pin code, low battery warning, emergency key override and many more safety features for your convenience.


Master code

Have the ability to change the Master code

User codes

Program up to 10 different user codes

Remote code change

Integrated into the Z-Wave device the automation management software has the ability to change the code remotely without being at the lock

Z-Wave networking enabled

The wireless lock is a certified Z-Wave device which can be configured to any Z-Wave certified home automation or building automation system

Remote unlocking

From the software interface the door can be unlocked remotely

Illuminated keypad

The keypad does not have mechanical buttons which means your secret pin cannot be traced.

includes Mechanical key barrel for manual override

Low battery warning

The lock will emit a tone notifying the owner to replace the batteries; normal battery use is 12-16 months

Electronic lock body front and rear with 60/70mm variable backset tubular latch
User guide - including manual operation and Z-Wave device commands

Mechanical overkey keys - in case of power failure
Screw kit and installation instructions - all hardware, striker plate, phillips screws

Please note: for remote unlocking and wireless connection, this device requires Z-Wave home controller with AU/NZ RF 921.42MHz. Available functions may depend on the compatibility of your home controller software.We recommend Vera Lite Home Controller or Vera 3


Product Support

Important note: To extend battery lifetime in KAS Lock, as well as to avoid disconnecting from Vera 3 / Lite please ensure that you have switched off polling or set a very long polling period for your KAS lock in Vera Z-Wave gateway. Please replace the default value of 150sec with either 0 (no polling) or 36000 (10 hours). You can do it in your KAS lock setting in the Vera interface.



Technical Specifications

Product Name 
 KAS Z-Wave Keypad Lock
Powered by
 4xAA High quality alkaline - 8,000 normal uses without using Z-Wave chip. The length of battery life will decrease when using the Z-Wave chip. Approximately 6-10 months of normal use
Operation Range
 Up to 30m indoor
Door thickness
 32-50 mm
Radio frequency
921.42 MHz (AU/NZ Z-Wave)
Fire rated
 Cannot be used on afire door
Front/rear lock body
 Die cast brushed stainless finish
Tubular latch  Zinc alloy 60/70 variable backset
 Zinc alloy die cast stainless finish
 Zinc alloy
 2.5 kg








Share this

Similar Products