Blackhawk’s 14 dBi Yagi antenna is one of the most popular installed 3G / 4GX antenna in Australia. This antenna is an ideal antenna for Cel-Fi GO repeaters that need to connect to a cell tower over a long distance.
With the shutdown of the Telstra 3G network already underway, it’s critical that any antenna being installed today is compatible with the Telstra 4GX (700 MHz) network which has been implemented alongside it as its replacement.
The Yagi antenna is tuned to a 200 MHz bandwidth @ VSWR ~1.8:1 from 690 to 890 MHz. This allows the one high gain antenna to operate on both 850 MHz 3G and 700 MHz 4G without any major compromise in performance. Once the 3G network has been shut off the antenna will then provide connectivity over the 5G NR850 network which will take its place.
With a 13 to 14 dBi gain, the antenna is designed to operate in rural and regional areas, out to about 40 kilometres from the nearest base station. This gain provides a good compromise between high gain and narrow beamwidth. Antennas need to maintain a reasonably wide beam (around 25 degrees in this case) to capture reflected and delayed radio paths that your device can digitally reconstruct.
- Ruggedised fully welded construction for extreme conditions
- Galvanised mounting clamp included
- 30 cm tail terminated with an N Female connector
- The perfect solution for voice and data applications where high gain antennas are required
- Ideal for fixed wireless terminals, mobile broadband internet and smart repeater applications
|Maximum Input Power
|Short 30 cm tail
|Fully welded aluminium, black powder coat
|Galvanised, pole mount Ø30-50 mm
|1290 x 210 x 70 mm
|1330 x 220 x 75 mm
|Rated Wind Velocity
|-40 to +70°C