The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
- Completely wireless
- Automatic software updates
- Includes a built in temperature sensor
- Comes in multiple colours
- Tamper and low battery alarm notification
Door/Window Sensor 2 - a contact sensor with a temperature measurement feature
Fibaro Door/Window Sensor 2 is a wireless, battery powered, Z-Wave Plus compatible magnetic contact sensor. Opening is detected by separating the sensor's body and the magnet. Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc. In addition, the Fibaro Door/Window Sensor 2 is equipped with a built-in temperature sensor.
Perfect combination in one device
The Fibaro Door/Window Sensor 2 combines the functionality of the 2 devices: contact and temperature sensors in one easy to use product. It also has a double tamper protection. This perfect combination of functionalities let you increase your comfort and safety.
Tamper and damage protection
The Fibaro Door/Window Sensor will immediately inform you about any attempts to remove the sensor or open its case. You can be sure that you and your family are protected.
Use it in any place you want
The Fibaro Door/Window Sensor 2 may be installed anywhere in the house thanks to the wireless Z-Wave network communication using double stick sided adhesive tape. It seamlessly fits into any interior design and is very simple to install. It's a battery operated device and does not require any wires. There are many places where this sensor would be very useful - it's on you to discover it!
Integrated temperature sensor
Control the temperature anywhere in the home. The Fibaro Door/Window Sensor 2 measures the temperature thanks to built-in temperature sensor.
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capablities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
Note: This device is currently only compatible (out of the box) with Fibaro Home Center 2 and Fibaro Home Center Lite controllers.
To enable this device to work with Vera controllers you need to do the following:
Under the devices Advance>Params you need to change the following details:
device_type - urn:schemas-micasaverde-com:
device_file - D_DoorSensor1.xml
device_json - D_DoorSensor1.json
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Technical Specifications
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave binary sensor, multilevel command supported
|
|
Power
|
One battery, type ER 14250 1/2AA 3.6V (included)
|
|
Operation Range
|
Up to 30m without obstacles
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
0 ~ 40 °C
|
|
Temperature Measuring Accuracy
|
±0.5°C
|
|
Temperature Measuring Range
|
0 ~ 60°C
|
|
Weight
|
70g
|
|
Housing
|
ABS
|
|
Dimensions
|
(LxWxH) 71mm x 18mm x 18mm
|
|
Compliance
|
AS/NZS 4268:2003+A1+A2
|
| Regulatory Compliance Mark | Z1535 |
