Sort by:
Description
FIBARO Z-Wave RGBW Controller2
Quick Overview
The FIBARO Z-Wave RGBW Controller 2 is a wireless controller which enables you to manage your LED strips and halogen lights.
- Wirelessly control LEDs with an unlimited range of colour options
- Monitors energy usage
- Four analogue sensor inputs
- Four dimmer channels
- Acts as a repeater expanding your Z-Wave network
Product Details
The FIBARO Z-Wave RGBW Controller 2 is a one of a kind advanced wireless 4-colour LED strip controller. Apart from the traditional RGB channels it also supports the white light channel which allows you to add pastel colours to your lighting decorations.
The FIBARO Z-Wave RGBW Controller 2 also has four analogue inputs supporting any type of Fibaro sensor (e.g. light sensors wind sensors pressure sensors and potentiometers operating between 0-10V). This smart feature allows you to use your lighting as a warning for certain events. You could for example set your RGB garden lights to turn red and flicker when one of your security sensors is triggered alerting your neighbours to the intruder and allowing them to notify the proper authorities.
This device has four output channels which means that you can connect and independently control up to four light sources. The FIBARO Z-Wave RGBW Controller 2 also allows you to monitor the energy consumed by the LED strips. Each of the four channels can be monitored independently providing you with all the information you need to minimise your energy bills.
The FIBARO Z-Wave RGBW Controller 2 can control:
- 12 / 24V DC-powered RGB strips
- 12 / 24V DC-powered RGBW strips
- 12 / 24V DC powered LED strips bulbs etc
- 12 / 24V DC-powered halogen lights
- 12 / 24V DC powered low output power fans
Note: Power supply is not included.
This product integrates with all Australian-certified (921.42 MHz) Z-Wave controllers including:
- Fibaro Home Center 3/Lite
- Fibaro Yubii Home
The FIBARO Z-Wave RGBW Controller 2 is compatible with the DHS RGB LED Strip which is also available.
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Please check the maximum load before installing or operating.
This device must be installed by a certified electrician.
For all warranty claims an electrical compliance certificate from your electrician must be provided.
Product Support
Manuals:
⇒ FIBARO Z-Wave RGBW Controller User Manual
⇒ Guide to Configuring Z-Wave Devices with Vera UI7 (Size: 435 kB)
Videos / YouTube:
Technical Specifications
RF Protocol |
Z‐Wave |
RF Frequency |
921.42Mhz ‐ AU/NZ approved RF for Z‐wave |
Z‐Wave device type |
Z-Wave dimmer |
Power |
12V and 24V |
Operation Range |
Up to 50m outdoors up to 30m indoors (depending on terrain and building structure) |
Application |
Controlled automatically by pre-set Fibaro devices or manually using any Z-Wave controller |
Operation temperature |
0 ~ 55 °C |
Storage temperature |
‐10 ~ 80 °C |
Weight |
50g |
Housing |
ABS |
Compliance |
EN 55015 EN 60669-2-1 |
Regulatory Compliance Mark |
N5496 |
@10/29
The Fibaro Z-Wave RGBW Controller is a wireless controller which enables you to manage your lighting decoration.
- Wirelessly control LEDs with an unlimited range of colour options
- Monitors energy usage
- Four analogue sensor inputs
- Four dimmer channels
- Acts as a repeater expanding your Z-Wave network
Product Details
The Fibaro Z-Wave RGBW Controller is a one of a kind, advanced wireless 4-colour LED strip controller. Apart from the traditional RGB channels it also supports the white light channel which allows you to add pastel colours to your lighting decorations.
The Fibaro Z-Wave RGBW Controller also has four analogue inputs supporting any type of Fibaro sensor (e.g. light sensors, wind sensors, pressure sensors and potentiometers operating between 0-10V). This smart feature allows you to use your lighting as a warning for certain events. You could, for example, set your RGB garden lights to turn red and flicker when one of your security sensors is triggered, alerting your neighbours to the intruder and allowing them to notify the proper authorities.
This device has four output channels which means that you can connect and independently control up to four light sources. The Fibaro Z-Wave RGBW Controller also allows you to monitor the energy consumed by the LED strips. Each of the four channels can be monitored independently providing you with all the information you need to minimise your energy bills.
The Fibaro Z-Wave RGBW Controller can control:
- 12 / 24V DC powered RGB strips
- 12 / 24V DC powered RGBW strips
- 12 / 24V DC powered LED strips, bulbs, etc
- 12 / 24V DC powered halogen lights
- 12 / 24V DC powered low output power fans
This product integrates with all Australian certified (921.42 MHz) Z-Wave controllers including:
- Vera 3/Lite
- Fibaro Home Center 2/Lite
The Fibaro Z-Wave RGBW Controller is compatible with the DHS RGB LED Strip which is also available.
This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.
For warranty claim you have to provide an installation compliance certificate from your electrician.
Product Support
Manuals:
⇒ Fibaro Z-Wave RGBW Controller User Manual (Size: 2.60 MB)
⇒ Fibaro System Overview (Size: 14.5 MB)
Videos / YouTube:
⇒ Fibaro Home Center 2 Presentation
Technical Specifications
|
RF Protocol
|
Z‐Wave
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐wave device type
|
Z-Wave dimmer
|
|
Power
|
12V and 24V
|
|
Operation Range
|
Up to 50m outdoors, up to 30m indoors (depending on terrain and building structure)
|
|
Application
|
Controlled automatically by pre-set Fibaro devices or manually using any Z-Wave controller
|
|
Operation temperature
|
0 ~ 55 °C
|
|
Storage temperature
|
‐10 ~ 80 °C
|
|
Weight
|
50g
|
|
Housing
|
ABS
|
|
Compliance
|
EN 55015, EN 60669-2-1
|
|
Regulatory Compliance Mark
|
N5496
|
The radio-controlled Roller Shutter 2 works with motorized roller blinds, Venetian blinds, awnings and gates. The Roller Shutter 2 is powered by a single-phase AC and provides precise positioning of blinds, awnings or gates so they can be set to the position you choose. The module is also equipped with a power metering feature when used with a FIBARO Home Center.
| Quick Overview |
The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or light up to a maximum load of 2.0kW.
- Control the ON-OFF function of a circuit remotely or using a wall switch
- Compatible with all Z-Wave networks
- Acts as a repeater expanding your Z-Wave network
- Wide range of compatibility with existing light fittings and does NOT require expensive cabling
- control loads up to 2kW (8A)
The main differences in the FGS-213 are:
- Z-Wave Plus certification
- Has power monitoring
- 230V powered only (this is the same as the FGS-212)
- No dry contacts - this is important. It means that the new FGS-213 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls. If you need device with dry contacts please see zConnect Z-Wave Garage Door Opener or FIBARO Z-Wave Sgl Switch InWall or DHS Z-Wave Sgl Switch InWall
| Product Details |
The Fibaro Z-Wave Single Switch 2 is a smart Z-Wave module capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
This Fibaro Z-Wave Single Switch 2 requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply.
The Fibaro Z-Wave Single Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Raspberry PI with RaZberry Card
- Fibaro Home Controller 2/Lite
- DHS Z-Wave Universal Remote Controller
- DHS Z-Wave Mini Remote Controller
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Please check the maximum load before installing or operating.
This installation must be done by a certified electrician in Australia and New Zealand.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim, you have to provide installation compliance certificate from your electrician.
| Technical Specifications |
|
RF Protocol
|
Z‐Wave
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave Switch, Routing Slave
|
| Power |
110-230V ± 10% 50/60 Hz
|
|
Operation Range
|
Up to 20m indoors with no obstacles
|
|
Application
|
Indoor use only, up to 2.0kW resistive load, 8A
|
|
Operation temperature
|
0 ~ 55 °C
|
|
Storage temperature
|
‐10 ~ 80 °C
|
|
Weight
|
50g
|
|
Housing
|
ABS
|
|
Compliance
|
EN 55015, EN 60669-2-1
|
|
Regulatory Compliance Mark
|
N5496
|
|
Dimensions
|
(LxWxH) 42mm x 37mm x 17mm
|
Fibaro z-wave wireless Door / Window Sensor 2 with Temperature sensor for smart home hub
$139.95
Unit price perFibaro z-wave wireless Door / Window Sensor 2 with Temperature sensor for smart home hub
$139.95
Unit price perThe FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.
- Completely wireless
- Automatic software updates
- Includes a built in temperature sensor
- Comes in multiple colours
- Tamper and low battery alarm notification
Door/Window Sensor 2 - a contact sensor with a temperature measurement feature
Fibaro Door/Window Sensor 2 is a wireless, battery powered, Z-Wave Plus compatible magnetic contact sensor. Opening is detected by separating the sensor's body and the magnet. Sensor can be used to trigger scenes and wherever there is a need for information about opening or closing of doors, windows, garage doors, etc. In addition, the Fibaro Door/Window Sensor 2 is equipped with a built-in temperature sensor.
Perfect combination in one device
The Fibaro Door/Window Sensor 2 combines the functionality of the 2 devices: contact and temperature sensors in one easy to use product. It also has a double tamper protection. This perfect combination of functionalities let you increase your comfort and safety.
Tamper and damage protection
The Fibaro Door/Window Sensor will immediately inform you about any attempts to remove the sensor or open its case. You can be sure that you and your family are protected.
Use it in any place you want
The Fibaro Door/Window Sensor 2 may be installed anywhere in the house thanks to the wireless Z-Wave network communication using double stick sided adhesive tape. It seamlessly fits into any interior design and is very simple to install. It's a battery operated device and does not require any wires. There are many places where this sensor would be very useful - it's on you to discover it!
Integrated temperature sensor
Control the temperature anywhere in the home. The Fibaro Door/Window Sensor 2 measures the temperature thanks to built-in temperature sensor.
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capablities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
Note: This device is currently only compatible (out of the box) with Fibaro Home Center 2 and Fibaro Home Center Lite controllers.
To enable this device to work with Vera controllers you need to do the following:
Under the devices Advance>Params you need to change the following details:
device_type - urn:schemas-micasaverde-com:
device_file - D_DoorSensor1.xml
device_json - D_DoorSensor1.json
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the Vera UI.
Technical Specifications
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave binary sensor, multilevel command supported
|
|
Power
|
One battery, type ER 14250 1/2AA 3.6V (included)
|
|
Operation Range
|
Up to 30m without obstacles
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
0 ~ 40 °C
|
|
Temperature Measuring Accuracy
|
±0.5°C
|
|
Temperature Measuring Range
|
0 ~ 60°C
|
|
Weight
|
70g
|
|
Housing
|
ABS
|
|
Dimensions
|
(LxWxH) 71mm x 18mm x 18mm
|
|
Compliance
|
AS/NZS 4268:2003+A1+A2
|
| Regulatory Compliance Mark | Z1535 |
Quick Overview
Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24
VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact.
The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood
sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting
tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave
network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of
substantial inundation of water.
Product Details
Technical Specifications
|
Product Name
|
Flood Sensor
|
|
Battery Type
|
CR123A
|
|
Operation Range
|
30m
|
|
Power
|
12 - 24 VDC (optional)
|
|
Radio frequency
|
921.42 MHz (AU/NZ Z-Wave)
|
|
Power Consumption
|
0,4W
|
|
Operation temperature
|
0 - 40C*
|
| Measured temperature range | -20 to 100C |
|
Temperature measuring accuracy
|
0,5 C
|
|
Housing
|
ABS
|
|
Size (Diameter x Height)
|
72 x 28 mm
|
The power of heart rate on your wrist.
PurePulse Heart Rate
Get continuous, automatic, wrist-based heart rate & simplified heart rate zones.
Long battery life
Lasts longer than competing trackers with a battery life of 5+ days
Auto sleep + Alarms
Monitor your sleep automatically & set a silent alarm
Wireless syncing
Sync stats wirelessly & automatically to leading smartphones and computers.
SmartTrack
Automatically recoginizes when you exercise & records it in the Fibit app
Workouts + All-Day Activity
Track workouts, heart rate, distance calories burned, floots climbed, active minutes & steps
Caller ID + Watch
See call notifications, daily stats & time of day on the OLED display
Exercise Tracking
Get real-time run stats & review routes, splits and workout summaries on the app
For better fitness, start with heart
Let your heart be your guide with Charge HR. Monitor heart rate automatically and continuously right on your wrist to accurately track calorie burn, maintain workout intensity, maximize training and optimize health—all without an uncomfortable chest strap.
Get better tracking with every beat.
Take control of your goals by using Charge HR to track all-day activity like heart rate, steps, distance, calories burned, floors climbed and active minutes. With an impressive battery life up to 5 days and instant access to every stat, you don’t have to look far for motivation to keep moving.
See your calls, call the shots.
With a comfortable fit and Caller ID, Charge HR lets you stay connected in style. See incoming call notifications on display when your phone is nearby to stay in the know, on the go.
Record your workouts. Reach your goals.
Get credit for workouts without pressing a button thanks to SmartTrack™—a feature that automatically recognizes and records select exercises. For even more precise tracking during workouts and real-time stats on your wrist, put Fitbit Charge HR into Exercise Mode. Then see how all your effort adds up by reviewing exercise summaries in the Fitbit app.
Know your nights, Improve your days.
Get a better picture of your overall health by using Charge HR to automatically track how long and how well you sleep. Sync your nightly stats to see online graphs that illustrate your sleep trends, and wake peacefully by setting a silent, vibrating alarm.
Sync up. Stay inspired.
Charge HR automatically and wirelessly syncs your stats to your computer and 120+ leading smartphones, and tracks your progress in detailed charts and graphs that keep you encouraged to reach your fitness goals.
SPECS
Sizing
Small
Large
X-Large
Sensors & Components
- Optical heart rate monitor
- 3-axis accelerometer
- Altimeter
- Vibration motor
Display
- OLED
Heart Rate
Like all heart rate monitoring technologies, accuracy is affected by physiology, location of device, and different movements. Learn more about wear during workouts.
What’s Included
- Charging cable
- Wireless sync dongle
Water Resistance
Charge HR is sweat, rain and splash proof. However, the device is not swim proof or showerproof. With any wearable device, it’s best for your skin if the band stays dry and clean.
Care
If the band gets wet or if you sweat in it, remove and completely dry the band before putting it back on. Clean the band with a mild soap-free cleanser like Cetaphil or Aquanil. Give your wrist a rest by taking the band off every now and then. Learn more.
Materials
Charge HR's wristband is made of a flexible, durable elastomer material similar to that used in many sports watches. Charge HR also has a surgical-grade stainless steel buckle.
Battery and Power
We recommend charging your device every few days to ensure you are always tracking.
- Battery life: lasts up to 5 days
- Battery type: Lithium-polymer
- Charge time: One to two hours
- Radio transceiver: Bluetooth 4.0
Environmental Requirements
- Operating temperature: −20° to 45° C
- Maximum operating altitute: 9.144 km
Memory
- Tracks 7 days of detailed motion data – minute by minute.
- Tracks daily totals for past 30 days
- Stores heart rate data at 1 second intervals during exercise tracking and at 5 second intervals all other times
Syncing
Charge HR syncs automatically and wirelessly to tablets, computers and 150+ leading iOS, Android and Windows smartphones using Bluetooth 4.0 wireless technology.
- Syncing range: 6 m
- Call notifications via Bluetooth 4.0
- Syncing to computers requires Internet connection and USB port
- Syncing to mobile devices requires Bluetooth and Internet connection
- Syncs with Windows Vista and later, Mac OS X 10.6 and up, iPhone 4S and later, iPad 3 gen. and later, and leading Android and Windows devices
The ultimate fitness super watch
GPS Tracking
See distance, pace and elevation climbed & review routes and split times
PurePulse Heart Rate
Get continuous, automatic, wrist-based heart rate & simplified heart rate zones
All-Day Activity
Track steps, distance, calories burned, floors climbed & active minutes
Multi-Sport + SmartTrack
Track runs, rides & other workouts with multi-sport modes or automatically record them with SmartTrack.
Long Battery Life
Lasts longer than competing trackers with a battery life of 7+ days
Notifications + Music
See call & text notifications on display and control songs from your mobile playlist
Auto Sleep + Alarms
Monitor your sleep automatically & set a silent alarm
Wireless Syncing
Sync stats wirelessly & automatically to leading smartphones and computers
Create your own path.
Track it with GPS.Don’t just start. Surge—with run time, distance, pace and elevation stats on display. See your routes as you run them, then scroll through workout summaries and split charts to stay on track while you train
Pursue your passion.
Maximize training, maintain intensity and monitor calorie burn with automatic wrist-based heart rate monitoring. With continuous heart rate readings, Surge keeps you in the zone—all day and during workouts.
No straps. No clips. No guessing.
Life on the move.
Stats on display.
Built with eight-sensor technology and best-in-class battery life, Surge transitions seamlessly from work to workouts—tracking real-time stats like steps, distance, heart rate, active minutes, calories burned and more, to keep you in the know, on the go.
Track it. See it. Beat it.
With multi-sport functionality and SmartTrack™ automatic exercise recognition, Fitbit Surge lets you track every aspect of your training. Use multi-sport modes for the most precise tracking during workouts and real-time stats on display. Or rely on SmartTrack to automatically recognize and record select exercises for you. However you choose to measure your effort, in-app workout summaries will help you gauge performance improvements.
Work hard.
But, also, work better.
Designed with advanced smartwatch features, Surge lets you run your day, your way. Text and call notifications keep you on your game throughout the day, while music control helps you find the motivation you need to prepare for a big meeting or beat your best in a big race.
Quantified sleep.
Quantified data.
Make the most of your day by getting more out of your night. Surge automatically monitors how long and how well you sleep, syncs those stats to your smartphone and computer, and displays your trends as detailed charts on the Fitbit dashboard. Plus, it has a silent alarm to make waking up easy—even if your training isn’t.
See what you've done, then do more.
Surge automatically and wirelessly syncs to your computer and 120+ leading smartphones—showing your stats as detailed charts and graphs—so you can access your progress anywhere.
Everything you need, all in one place.
See Progress
View your progress and analyze your trends with easy-to-read charts and graphs
Record workouts
Log workouts, track run and bike stats, map toutes & see a monthly exercise calendar
Share & compete
Invite friends and family to share stats, send cheers and taunts, and compete on the leaderboard.
Log food
Log food fast with a barcode scanner, calorie estimator, meal shortcuts & expanded food database
Earn badges
Get goal progress notifications & celebrate fitness milestones with badges
Sleep batter
Set sleep goals, review sleep quality & see weekly sleep tread graphs
SPECS
Sizing
Small
Large
X-Large
what's included
Charging cable / Wireless sync dongle
Sensors and Components
- GPS
- 3-axis accelerometers
- 3-axis gyroscope
- Digital compass
- Optical heart rate monitor
- Altimeter
- Ambient light sensor
- Vibration motor
Display
- Touch screen
- Monochrome LCD
- Backlight for low light visibility
Bike Tracking
- When using bike tracking, always pay attention and mind the rules of the road.
Water Resistance
Surge has been tested up to 5 ATM meaning it is sweat, rain and splash proof. However, the device is not swim proof. We also recommend taking Surge off before showering because, as with any wearable device, it’s best for your skin if the band stays dry and clean.
Care
If the band gets wet or if you sweat in it, remove and completely dry the band before putting it back on. Clean the band with a mild soap-free cleanser like Cetaphil or Aquanil. Give your wrist a rest by taking the band off every now and then. Learn more.
Materials
Surge’s wristband is made of a flexible, durable elastomer material similar to that used in many sports watches. Surge also has a surgical-grade stainless steel buckle.
Heart Rate
Like all heart rate monitoring technologies, accuracy is affected by physiology, location of device, and different movements.
Battery and Power
We recommend charging your Surge every few days to ensure you are always tracking.
- Battery life: lasts up to 7 days
- Battery type: Lithium-polymer
- Charge time: One to two hours
- Radio transceiver: Bluetooth 4.0
Environmental Requirements
- Operating temperature: -20 ° to 45 °C
- Maximum operating altitude: 9.144 km
Memory
- Tracks 7 days of detailed motion data – minute by minute.
- Tracks daily totals for past 30 days
- Stores heart rate data at 1 second intervals during exercise tracking and at 5 second intervals all other times
- Sample rate for GPS is 1 Hz
Syncing
Surge syncs automatically and wirelessly to tablets, computers and 150+ leading iOS, Android and Windows smartphones using Bluetooth 4.0 wireless technology.
- Syncing range: 6 m
- Notifications: Text and call via Bluetooth 4.0
- Music control: via Bluetooth Classic
- Syncing to computers requires Internet connection and USB port
- Syncing to mobile devices requires Bluetooth and Internet connection
- Syncs with Windows Vista and later, Mac OS X 10.6 and up, iPhone 4S and later, iPad 3 gen. and later, and leading Android and Windows devices
Description
| Quick Overview |
For Use With The ITach Flex
The Global Caché Flex Link Serial Cable (RS485) connects to your iTach Flex Module via the 3.5mm jack to enable IP/WiFi control for RS485 serial components. The RS485 setting includes Baud Rate Duplex Parity Data Bits and Stop Bits. The RS485 serial cable is both 4-wire (full duplex) and 2-wire (half duplex) capable. Duplex is unique to RS485 serial cables. It should be set to Full for 4-signal RS485 and Half for 2-signal RS485.
Simply Connect With Global Cache
The Global Caché family of connectivity products provides choices for the industry professional and the consumer significantly reducing costs and providing a scalable platform for today and the future. Global Caché’s belief in open systems and the evolution of the automation market is being played out today since cost-effective PC-based and phone-based control applications are now becoming widely available. iTach devices Network Adapters and other Global Caché connectivity products have radically changed the automation dynamic. These products are engineered to integrate easily into any control environment even high-end proprietary systems providing a path to open systems and better competitive leverage.
| Product Details |
Flex Link Serial cables allow serial devices to be controlled with the Flex family of products. With the Flex Link RS485 Serial cable the Flex Link RS232 Serial cable and the Flex Link RS232 Mini Jack cable RS232 and RS485 serial devices can be simply connected to the network for seamless control. The Flex Link RS232 Serial cable and the Flex Link RS232 Mini Jack cable provide connections to devices with different physical RS232 connectors. The Flex Link RS232 Serial cable features a standard DB9 connector that allows for swapping pins in setup. The Flex Link RS232 Mini Jack cable utilizes a 3.5 mm mini jack allowing for direct connections to 3.5 mm mini jack RS232 ports and serial inputs on many common TVs and other AV devices.
The iTach Flex enables you to easily control any Infra-Red (IR) appliance via your home’s LAN network. Appliances such as TVs DVD/Blu-Ray Amplifiers can all be controlled from your Z-Wave network controller (via local LAN) and then control it from your Z-Wave controller such as Fibaro HC2 or VERA.
The iTach Flex includes the unique ‘Global Port’ enabling you to choose which types of device the iTach Flex controls by selecting any of the Flex Link Cables:
- Flex Link IR Blaster – Blasts IR signals to all devices in 10m range
- Flex Link IR Emitter – single IR emitter
- Flex Link Tri-Port IR Cable – enables up to 3 IR emitters to be connected to on iTach Flex
Note – the Flex Link cables are not included with the iTach Flex you need to choose at least one Flex Link Cable when you order the iTach Flex.
FIBARO HC2 INTEGRATION
To enable the Fibaro Home Center to use the iTach devices we need to create a Virtual Device. This Virtual Device sends the correct IR commands to the iTach to control the particular appliance and can be used from a browser smartphone or tablet.
This guide below shows you how to:
- Create a Virtual Device in Fibaro Home Center
- Use IR Commands that the iTach has ‘learnt’ for a specific appliance
- Use the Virtual Device to control the appliance using IR commands via the iTach IR adapter
Make sure you have configured your iTach adapter and have used it to ‘learn’ the IR codes of the appliance you wish to control.
Full information is in this document.
| Product Support |
Videos:
⇒ Global Cache Flex IP iTach Flex
Manuals:
⇒ GlobalCache iTachFlex Specifications (Size: 1390 KB)
⇒ Global Cache iTach Flex API and downloads
⇒ Fibaro HC2 to Global Cache iTach Flex Guide (Size: 648 KB)
| Technical Specifications |
- Manufacturer Part #: FLC-SL-485
- Interface: Serial RS485; 4-wire (full duplex) and 2-wire (half duplex) capable
- Connector: 5 pin screw terminal block
- Speed: 300 baud to 115.2 Kbaud
- Cable/Connector: 5 feet 3.5 mm plug connects to Flex Link Port
- Warranty: 2 Years
@8/27
Features:
- 2 Channel Infra-ray Remote Control
- Builtin Gyro for stability
- Li-Poly 3.7V battery with USB Charger and charging cable
- In-door/Out-Door space required: 20(W) x 30(L) x 10{H) meters
- for age 14+
- Size: 220 x 53 x 105 mm
FM Aspen Case Armour with D3O 5G Signal Plus For iPhone 12 Pro Max 6.7" - Slate/Clear
FM Aspen Case Armour with D3O 5G Signal Plus For iPhone 12 Pro Max 6.7" - Slate/Clear
EFM Aspen Case Armour with D3O 5G Signal Plus
For iPhone 12 Pro Max 6.7" - Slate/Clear
- D3O with 5G Signal Plus Technology
- Military Grade Protection
- D3O Impact Protection
- Antimicrobial
Description:
EFM Aspen 5G Case Armour with latest in antimicrobial technology is one of our slimmest, toughest, clearest, cleanest and most 5G optimised cases in the market, integrated with brand new D3O with 5G Signal Plus Technology. D3O with Signal Plus Technology is the only material to meet the industry 5G permittivity standard and is proven to limit 5G signal loss by 37 percent compared to any other case material in market, giving your device optimum 5G signal, crystal clear audio and video, faster download speeds, prolonged battery life and best in class impact protection. The latest ion-exchange technology incorporated into the case material kills up to 99.99 percent of bacteria and prevents further growth and reproduction during the life of the case. This range also features pops of colour and an improved PC backplate that is sturdy, consists of recycled materials to reduce impact on the environment and wraps around the D3O infused bumper for additional protection, better structural integrity and reduction on the rate of yellowing. Flaunt your 5G device with the EFM Aspen 5G case Armour, the tried and tested solution for slim but tough impact protection.
Specifications
- D3O with 5G Signal Plus Technology
- Military Grade Protection
- D3O Impact Protection
- Antimicrobial
- Gross Weight is 0.1 gm
- Height is 2 cm
- Width is 11 cm
- Depth is 21 cm
Compatibility:
Otterbox Symmetry Clear Case For Google Pixel 7 Pro
- Sleek/Stylish/Pocket Friendly
- Antimicrobial
- Wireless Charge Compatible
Description:
Show off your phone with the slim profile of Symmetry Series, the clear Pixel case that coordinates with any look. Fortified with drop protection and easy to install, Symmetry Series is designed so your phones features work just like you expect. Addiitionally, a silver-based antimicrobial additive is integrated into the case that helps inhibit microbial growth and defends the case exterior against many common bacteria. Its style thats ready to grab and go wherever the day takes you.
Specifications
- Sleek/Stylish/Pocket Friendly
- Antimicrobial
- Wireless Charge Compatible
- Gross Weight is 0.08 gm
- Height is 1.8 cm
- Width is 11 cm
- Depth is 20.3 cm
Compatibility:
- Google Google Pixel 7 Pro (6.7")
SKU: 77-89570
Otterbox React Folio Case For iPad 10.9 inch (10th Gen) - Black
- Stand Functionality
- Built In Screen Protection
- Military Grade Protection
Description
React Series Folio protects Apple iPad against drops, and its back window makes it easy to identify engravings and asset tags. The folio case microfiber lining safeguards the screen, and an elastic closure holds it closed. Convert the folio into two stand positions for convenient typing and viewing and stow your Apple Pencil or stylus securely inside the case.
Specifications
- Stand Functionality
- Built In Screen Protection
- Military Grade Protection
- Gross Weight is 0.35 gm
- Height is 1.7 cm
- Width is 27.94 cm
- Depth is 27.94 cm
Device Compatibility
SKU77-92188
For Apple iPad 10.2 (9th/8th/7th Gen) GEAR4 Orlando D30 Kids Rugged Case
For Apple iPad 10.2 (9th/8th/7th Gen) GEAR4 Orlando D30 Kids Rugged Case
Key features
- Drop Resistant up to 6.5ft (2m)
- Moulded EVA material and an inner border lining of D3O®
- Versatile arms for carrying and hanging
Drop Resistant Up to 6.5ft (2m)
Orlando has thick, moulded EVA material and an inner border lining of D3O®. D3O® is a pliable, flexible material that hardens on impact, dissipating shock and protecting your device. Orlando provides 6.5 feet of drop protection, so you can feel confident when your kids take their tablet with them on-the-go.
Versatile Arms for Carrying and Hanging
Each arm rotates 180º and can be used to carry the tablet or hang it from the headrest of a car seat for easy, hands-free viewing.
Key Features
Drop Resistant up to 6.5ft (2m)
Moulded EVA material and an inner border lining of D3O®
Versatile arms for carrying and hanging
DETAILS
For Apple Watch Series 4/5/6/SE 42-44mm-Case-Mate Nylon Watch Band -Nylon Black
For Apple Watch Series 4/5/6/SE 42-44mm-Case-Mate Nylon Watch Band -Nylon Black
Description:
Don’t worry about sacrificing style when working on your fitness. The Nylon Apple Watch Band fits in perfectly with your active lifestyle.
Compatibility:
- Apple Watch 44mm Series 5
- Apple Watch 44mm Series 4
- Apple Watch 44mm Series 6
- Apple Watch 42mm Series 2
- Apple Watch 42mm Series 3
- Apple Watch 44mm Series SE
- Apple Watch 42mm 1st Gen
SKU:CM041676
For Apple Watch Series 6/SE/5/4 40mmOtterbox EXO Edge Case - Bright Sun-Sunlit Tangerine
$39.94
Unit price perFor Apple Watch Series 6/SE/5/4 40mmOtterbox EXO Edge Case - Bright Sun-Sunlit Tangerine
$39.94
Unit price perDescription:
Guard the guardian of your activities with EXO EDGE for Apple Watch. The Apple Watch Series 6/SE/5/4 protective case with a precision fit. Its solid bezel, sleek design, smooth bumper and snug feel all combine to ensure your display stays intact and free from cracks no matter what you put it through.
Compatibility:
SKU:77-81216
For Apple Watch Series 6/SE/5/4 44mm Otterbox EXO Edge Case- Lake Mist-Greyish Blue
$39.95
Unit price perFor Apple Watch Series 6/SE/5/4 44mm Otterbox EXO Edge Case- Lake Mist-Greyish Blue
$39.95
Unit price perOtterbox EXO Edge Case
For Apple Watch Series 6/SE/5/4 44mm - Lake Mist
- Latest fashion trend designs
- Wireless Charge Compatible
- Impact Protection
Description:
Guard the guardian of your activities with EXO EDGE for Apple Watch. The Apple Watch Series 6/SE/5/4 protective case with a precision fit. Its solid bezel, sleek design, smooth bumper and snug feel all combine to ensure your display stays intact and free from cracks no matter what you put it through.
Compatibility:
OtterBox Symmetry Series Case for Galaxy Note20 (6.7) - Stardust/Clear
Show off your phone with the slim profile of Symmetry Series Clear, the clear Galaxy Note20 5G case that coordinates with any look. Fortified with drop protection and easy to install, Symmetry Series Clear is designed so your phone's features work just like you expect. It's style that’s ready to grab and go wherever the day takes you.
Features:
- Thin profile slips easily into tight pockets
- Durable protection defends against drops, bumps and fumbles
- Raised screen bumpers help protect your display
- One-piece design pops on and off in a flash
- Limited lifetime warranty and hassle-free customer service
- Tested by us with 24+ tests and 238+ hours of testing
Specifications:
- Compatible With: Galaxy Note20 5G
- Materials:: Polycarbonate, Synthetic rubber
- Dimensions: 6.61 in x 3.24 in x 0.49 in / 167.89 mm x 82.30 mm x 12.45 mm
- Weight: 0.10 lbs | 44.90 g

