Sort by:
Description
Quick Overview
Z-Wave® smart switch 1 channel 16 A with power metering
Control and measure power consumption for a wide range of home appliances and office equipment (lights power lines security systems electric heaters air conditioners etc.) from anywhere.
- Power metering
- Extremely low power consumption: < 0.3 W.
- Z-Wave frequency band: 919.8 MHz (Australia and New Zealand)
- Latest technology: Z-Wave 800 Series
- Automatic set-up with SmartStart
- Security 2 Authenticated for the highest level of security
- Supports over-the-air firmware updates
- Simple installation in most standard electrical boxes and switches
- Works with Z-Wave certified gateways and over 4 000 Z-Wave devices
*A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.
Shelly Qubino works on Z-Wave
By using Z-Wave smart home products can seamlessly communicate with each other regardless of their brand or platform thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800) one of the most popular standardized technologies for smart homes in the world.
*Z-Wave devices have specific requirements in order to function correctly such as the necessity to use a supported Z-Wave hub. For more information please visit the official Z-Wave website: www.z-wave.com
Manuals:
⇒ Shelly Z-Wave Qubino Wave 1PM
⇒ Z-Wave Fan Control Solution(250KB)
⇒ Guide to Configuring Z-Wave Devices with Vera UI7 (Size: 435 kB)
Videos / YouTube:
Technical Specifications
| Power supply | 110-240 V AC / 50/60 Hz |
| Power consumption | < 0.3 W |
| Max. switching voltage AC | 240 V |
| Max. switching current AC | 16 A |
| Max. switching voltage DC | 30 V |
| Max. switching current DC | 10 A |
| Overheating protection | Yes |
| Distance | Up to 40 m indoors (131 ft.) (depends on local condition) |
| Z-Wave® repeater | Yes |
| CPU | Z-Wave® S800 |
| Z-Wave® frequency bands | 868 4 MHz; 865 2 MHz; 869 0 MHz; 921 4 MHz; 908 4 MHz; 916 MHz; 919 8 MHz; 922 5 MHz; 919 7-921 7-923 7 MHz; 868 1 MHz; 920 9 MHz |
| Maximum radio frequency power transmitted in frequency band(s) |
< 25 mW |
| Size (H x W x D) | 37x42x16 ±0.5 mm / 1.46×1.65×0.63 ±0.02 in |
| Weight | 27 g / 0.95 oz. |
| Mounting | Wall console |
| Screw terminals max. torque | 0.4 Nm / 3.5 lbin |
| Conductor cross section | 0.5 to 1.5 mm² / 20 to 16 AWG |
| Conductor stripped length | 5 to 6 mm / 0.20 to 0.24 in |
| Shell material | Plastic |
| Ambient temperature | -20°C to 40°C / -5°F to 105°F |
| Humidity | 30% to 70% RH |
| Max. altitude | 2000 m / 6562 ft |
@7/25
Description
Quick Overview
Z-Wave™ shutter control with power measurement 10 A per channel
Automate and remotely control the position of roller shutters blinds windows awnings pool covers and other devices powered by bi-directional AC motors.
- Control the tilt position (angle) of the venetian blind slats
- Supports push-buttons/momentary switches and toggle switches
- Power metering
- Extremely low power consumption: < 0.3 W
- Z-Wave frequency band: 868.4 MHz (CEPT countries)
- Latest technology: Z-Wave 800 Series
- Automatic set-up with SmartStart
- Security 2 Authenticated for the highest level of security
- Over-the-air firmware updates
- Works with Z-Wave-certified gateways and over 4 000 Z-Wave devices
*A gateway (smart hub) is not included. A gateway (smart hub) is required for the configuration of the device.
Works with any Z-Wave gateway
Wave Shutter is retrofit and designed to fit behind switches/push-buttons instantly transforming them into smart ones. Once installed include the device in your Z-Wave network (Z-Wave gateway is required) and control connected appliances from anywhere using your smartphone or tablet. Shelly Qubino devices work with over 4000 Z-Wave certified devices and gateway
Shelly Qubino works on Z-Wave
By using Z-Wave smart home products can seamlessly communicate with each other regardless of their brand or platform thanks to a centralized smart hub! Shelly Qubino devices work on the latest Z-Wave chip generation (S800) one of the most popular standardized technologies for smart homes in the world.
*Z-Wave devices have specific requirements in order to function correctly such as the necessity to use a supported Z-Wave hub. For more information please visit the official Z-Wave website: www.z-wave.com
Manuals:
⇒ Shelly Z-Wave Qubino Wave Shutter
⇒ Z-Wave Fan Control Solution(250KB)
⇒ Guide to Configuring Z-Wave Devices with Vera UI7 (Size: 435 kB)
Videos / YouTube:
Technical Specifications
| Power supply | 110-240 V AC / 24 V DC +/-10% |
| Power consumption | < 0.3 W |
| Max. switching voltage AC | 240 V |
| Max. switching current AC | 110 A per channel |
| Max. switching voltage DC | 30 V |
| Max. switching current DC | 10 A |
| Overheating protection | Yes |
| Distance | Up to 40 m indoors (131 ft.) (depends on local condition) |
| Z-Wave® repeater | Yes |
| CPU | Z-Wave® S800 |
| Z-Wave® frequency bands | 868 4 MHz; 865 2 MHz; 869 0 MHz; 921 4 MHz; 908 4 MHz; 916 MHz; 919 8 MHz; 922 5 MHz; 919 7-921 7-923 7 MHz; 868 1 MHz; 920 9 MHz |
| Maximum radio frequency power transmitted in frequency band(s) |
< 25 mW |
| Size (H x W x D) | 37x42x16 ±0.5 mm / 1.46×1.65×0.63 ±0.02 in |
| Weight | 29 g / 1.02 oz. |
| Mounting | Wall console |
| Screw terminals max. torque | 0.4 Nm / 3.5 lbin |
| Conductor cross section | 0.5 to 1.5 mm² / 20 to 16 AWG |
| Conductor stripped length | 5 to 6 mm / 0.20 to 0.24 in |
| Shell material | Plastic |
| Ambient temperature | -20°C to 40°C / -5°F to 105°F |
| Humidity | 30% to 70% RH |
| Max. altitude | 2000 m / 6562 ft |
@7/25
Get a Bonus HDMI cable with the Shintaro Blazer Docking Station at Deals King !
The Shintaro Blazer Docking Station is a unique device for computers that have extra connectivity demands.
Through the docking station, you can extend the connection of a computer to more USB peripherals, Ethernet network, speaker and microphone using only one USB port on your computer.
This docking station features built-in USB 3.0 ports which mean you can enjoy the super speed data transmission between USB peripherals (also compatible with USB 1.1/2.0).
SPECS
Manufacturer
- Shintaro
Connectors
- HDMI
- DVI
- USB 2.0 x 4
- USB 3.0 x 2
- RJ45
- 3.5mm Stereo Headphone jack
- DC Power jack (Host 1 x USB 3.0)
Video Resolution
- HDMI/DVI 2048 x 1152
Audio
- 2.1 Ch
Ethernet
- 10/100/1000
Dimensions
- 190 x 78 x 40mm
Compatibility
- Supports Windows XP and Higher
Flexible Functionality
Lightweight and elastic, Gear S3 Active Silicon straps are designed to curve snugly to the contours of your wrist for a comfortable fit. And with several colour options to choose from, there’s a different style for every occasion.
Active Protection
Gear S3 Active Silicon straps are highly resistant and non-absorbent, making them perfect for active lifestyles. The underside features a textured surface to prevent slipping, improve airflow and repel moisture.
SPECS
Color
- Black
- Khaki
- Orange/Red
Compatible Models
- Gear S3
Packaging Contents
- Gear S3 Band 21 cm in total length
Alternative similar Product:
Special Look for coming Winter!!
Strap Studio Watch Band Designed for Samsung Gear S3 and Gear Sport
Silver Milan Stainless Steel Loop Watch Band to fit Smart Watch Gen 1 2 3
Silver Milan Stainless Steel Loop Watch Band to fit Smart Watch Gen 1 2 3
Milanese 316L Stainless Steel Magnetic Loop
Introducing our Premium Silver Milanese Apple® Watch Band!
Made from a lightweight, high quality stainless steel featuring an adjustable magnetic closure.
- Stainless Steel featuring 22mm width that is perfectly compatible with your Apple® Watch Band
- Adjustable Magnetic Closure to ensure a comfortable fit every time.
- Nothing extra required in order to attach this band to your Apple® Watch
Sizing Guide:
- 38MM fits wrists: 130~230mm
- 42MM fits wrists: 135~255mm
Simple and convenience smart cards storage pouch
Practicality
Carry just the smart phone and cards when you go out.
Sinji Pouch Basic 3, the perfect item for traveling light and adding style to
your smart phone simply by sticking-on.
Feast of colors
Sinji pouch lightens your outing with solid card storage solution in
fantastic color harmony of white and black synthetic leather.
Simple and convenience smart cards storage pouch
Practicality Sinji Pouch Basic 3, the perfect item for traveling light and adding style to Feast of colors
Sinji pouch lightens your outing with solid card storage solution in
Carry just the smart phone and cards when you go out.
your smart phone simply by sticking-on
fantastic color harmony of white and black synthetic leather.
Description
Skaro Automation Bridge Pro
The Ultimate Smart Home Integration for Apple HomeKit Alexa and Google Home
Are you looking to unify your smart home ecosystem without switching out all your existing devices? Skaro Automation Bridge Pro offers a seamless and powerful solution to integrate your Z-Wave devices and scenes with Apple HomeKit Amazon Alexa and Google Home—all from a single hub.
With support for Fibaro Home Center 3 Shelly and more Skaro Automation Bridge Pro simplifies smart home control by bridging the communication gap between multiple smart home technologies. Whether you’re managing lighting security or climate the Skaro Automation Bridge Pro ensures everything works in harmony—locally securely and intelligently.
What Is the Skaro Automation Bridge Pro?
The Skaro Automation Bridge Pro is a dedicated smart home hub that connects a variety of Z-Wave gateways—such as Fibaro Home Center 3 Fibaro Home Center Lite Vera Edge Vera Plus and Vera Secure—to popular smart home ecosystems. With Automation Bridge you can instantly control and automate your existing devices using voice assistants like Siri Amazon Alexa and Google Assistant.
Automation Bridge also supports Shelly devices offering local control—a significant benefit for users who prefer not to rely on cloud-based systems for security and reliability.
Compatible Systems and Devices
Automation Bridge Pro is compatible with a wide range of smart home controllers including:
Fibaro Home Center 3
Fibaro Home Center Lite
Fibaro Home Center 2
Vera Edge / Plus / Secure
Shelly (Lite and Pro versions)
Homey Z-Wave Controllers
Once connected to your home network Automation Bridge discovers your Z-Wave devices and scenes allowing you to control them using Apple HomeKit Alexa or Google Home.
You can switch devices on and off dim lights check sensor status and trigger automation scenes—all with a simple voice command or via your preferred app interface.
Voice Assistant Integration
The Automation Bridge Pro supports all three major voice ecosystems:
Apple HomeKit (Siri)
Amazon Alexa
Google Home
This makes it easy for homeowners to integrate smart home functions into their daily routines. For example you can say:
“Hey Siri turn off the hallway lights.”
“Alexa activate Movie Scene.”
“Hey Google set the bedroom lights to 30%.”
Such integrations are designed to work reliably and locally ensuring speed responsiveness and data privacy.
Extend Functionality with Plugins
One of the standout features of the Automation Bridge Pro is its plugin support. This allows you to integrate additional third-party systems and technologies that aren’t natively compatible with your primary Z-Wave controller.
With the use of plugins Automation Bridge becomes a unified automation platform enabling interoperability between devices that otherwise wouldn’t communicate. Whether it’s smart thermostats IP cameras or other home automation platforms the bridge acts as a central translator enabling cross-system coordination.
Inspired by Open Source Built for Performance
Skaro Automation Bridge is inspired by open-source solutions but builds on them with enhanced stability usability and performance. It brings the best of open innovation together with reliable commercial-grade execution.
The system is easy to set up supports regular firmware updates and is backed by extensive documentation and customer support resources.
Why Choose Automation Bridge Pro?
Local Control: Operates independently of cloud services for speed and privacy. Multi-System Compatibility: Works with Fibaro Vera Shelly Homey and more. Voice Assistant Ready: Integrates easily with HomeKit Alexa and Google Home. Future-Proof: Supports plugins for third-party smart devices and systems. Easy Setup: Plug connect and sync—all from your local network.
Conclusion
If you’re building a smart home that’s as flexible as it is powerful the Skaro Automation Bridge Pro is the solution you’ve been waiting for. It brings together the best in home automation technology enabling seamless control of your Z-Wave devices and third-party systems through Apple HomeKit Amazon Alexa and Google Home.
Say goodbye to fragmented systems and hello to a cohesive user-friendly smart home experience.
Product Support
Manuals:
⇒ Manuals
Z-Wave device compatibility
Once automationbridge is connected to your home network and Z-Wave Controller you will be able to include your Z-Wave devices and scenes with Apple HomeKit Amazon Alexa and Google Home.
@48/77
Description::
Heavy-Duty Vehicle Antenna Designed for Rural Mobile Coverage
This rugged bullbar antenna is purpose-built for regional and outback use engineered to maximise 4G and 5G connectivity across Australia’s carrier networks. Featuring a wideband PCB radiator housed in a fibreglass radome and mounted via a heavy-duty stainless steel bell spring it withstands harsh terrain without compromising performance. The design delivers strong gain IP67-rated durability and optimal low-band tuning for remote signal retention.
Key Features
- Wideband Coverage: Supports 698–3800 MHz frequencies for full compatibility with Telstra Optus and Vodafone mobile networks.
- Optimised for Remote Bands: Tuned for best performance on Band 28 (700 MHz) Band 26 (850 MHz) and Band 8 (900 MHz) ensuring signal in rural zones.
- Heavy-Duty Bell Spring: Thick stainless steel spring absorbs impact and corrugations protecting the antenna on rough tracks.
- Durable Fibreglass Radome: Reinforced tapered fibreglass whip resists flex and weather exposure while housing the internal PCB radiator.
- IP67-Rated Connector: 4.3–10 removable interface separates mechanical stress from RF path enhancing long-term reliability.
- Ground-Independent Design: Enables flexible mounting across vehicles with consistent signal performance regardless of surface.
- Australian Engineering: Built and tuned specifically for harsh Australian conditions with strong local support.
Made to handle off-road demands this antenna ensures consistent connectivity when travelling beyond coverage blackspots.
Specification:
| Specifications | |
|---|---|
| Frequency Range | 698–960 / 1710–2170 / 2300–2700 / 3400–3800 MHz |
| Nominal Gain | 5.6 dBi |
| Input Power | 10 W max |
| Impedance | 50 Ω |
| VSWR | <1.2:1 typical |
| Polarisation | Vertical |
| Grounding | Ground-independent |
| Connector | SMA Male via 5 m RG58 cable |
| Spring | Heavy-duty stainless steel bell spring |
| Mounting | M14×2P threaded stud and nut |
| Length | 830 mm |
| Weight | 1.9 kg |
| Operating Temperature | –40 to 80 °C |
| Certifications | ISO 9001 |
@20/38
- Soft Flexible TPU case, material texture designed to increase both the aesthetic and grip
- Thickness reaches 0.09 inch, engineered to emphasize thinness without compromising phone security
- Anti-allergy material is harmless to human skin. Meet the standard of ROHS/Reach
- Precise cutouts give you full access to ports, and sensitive button covers allow responsive presses
Shock-absorbent TPU covers your phone like a glove while a solid colour TPU material provides non-slip finish guards against drops and impact.
Designed to be durable without compromising a classy slim profile, this case is ideal for everyday use and withstands moderate falls.
A raised lip protects the touchscreen and camera lens from scratches.
Exclusively button structure provides a full protection to your phone buttons.
Installation:
The installation is pretty simple, simply point and insert the top of the phone into the case first, and snap your case into place.
Description:
The DS2300 works well with any door window or opening. When triggered (separated) an alarm signal will be sent to the system for appropriate response. it also comes with tamper protection to ensure system integrity and can work with other wired detectors.
Specifications:
Power Supply: DC 3V (CR2032 button cell battery x 2) Static Current: ≤ 1 uA Alarm Current: ≤ 10.5 mA Transmitting Distance: ≤ 80 m (open area/no interference) Radio Frequency: 915 MHz (�75KHz) Housing Material: ABS plastic Operation Condition: Temperature 0�C ~ +55�C Relative Humidity ≤80% (Non-condensing) Transmitter Dimensions (LxWxH): 72 x 28 x 10 mm Magnet Dimensions (LxWxH): 58 x 14 x 9.5 mm|
Description:
Easy to carry around on a keychain or in your pocket or purse the RE2300 helps you quickly arm or disarm your alarm system and comes with an SOS panic button.
Specifications:
Power Supply: DC 3V (CR2032 button cell battery x 1) Transmit Current: ≤ 9.5 mA Transmitting Distance: ≤ 80 m (open area/no interference) Radio Frequency: 915 MHz (�75KHz) Housing Material: PC plastic Operation Condition: Temperature: 0�C ~ +55�C Relative Humidity: ≤80% (Non-condensing) Dimensions (L�W�H): 71 x 38 x 12 mm|
Smart Video Doorbell & Chime Kit
DB-30
The smanos Smart Video Doorbell & Chime Kit is an exciting new addition to the smanos smart home portfolio. The completely wire-free Video Doorbell is easy to install, for outdoor use. With just 3 AA batteries and normal usage, it is estimated to last for approximately 10 to 12 months before a change of batteries. When someone presses on the bell button, the Wireless Chime will ring, and you and your family get an instant notification on your smartphones, enabling you to see and speak with your visitor no matter where you are in the house or in the world.
*Battery life is measured by an average of 2 presses on the bell button per day with recommended Alkaline batteries.
100% Wire-Free Design
With ultra-low power consumption technology, this Video Doorbell works under normal usage for about 12 months in standby mode with 3 AA batteries. No wiring or cable is required. Just apply the provided bracket and screws to affix the doorbell to your door frame, and then connect the doorbell to your home WiFi network by following the step-by-step instructions in our free app, and you are good to go. The Wireless Chime included works exclusively with this doorbell and is a plug-&-play device, which can be plugged into any standard power outlet inside your home.
Answer Your Door Anywhere, Anytime
When someone presses on your doorbell, you will get an app push notification right away. A preview image enables you to see who is outside first and decide whether or not to pick up the call. After you pick up, you are able to see, hear and speak with your visitor in 720p HD video and two-way audio from anywhere in the world where your smartphone has a data or WiFi connection.
Free Cloud Storage
You no longer need to worry about local storage or any visit that you might have missed. For each press of the doorbell, a 15-second video clip will be securely encrypted and saved to our cloud server (housed on AWS®). Right now, a ONE-YEAR Basic Plan* is offered to each smanos video device for optimal user experience. After the first year is up, you can easily downgrade to Free, or subscribe to Basic or Premium plan directly in the app, at your fingertips. Sheck more information on the smanos cloud.
*Basic Plan stores event-based video clips from the past 7 days.
Sharing Devices with Family or Friends
Everyone in the family can have their own account for free. The person who sets up the doorbell is the Main Administrator, who can then share device access with up to 10 family and friend accounts with two levels of access rights - Admin or User. Admin will have full access rights, except for re-sharing the devices, while User will only receive alerts and edit their own account information.
Specifications
Doorbell
-
Power supplyAA 1.5V Alkaline batteries x3 pcs
-
Image sensor1/4-inch,1-megapixel CMOS sensor
-
Video quality1280x720
-
Field of view80 degrees
-
Night vision & motion detectionNo
-
Wi-Fi802.11 b/g/n (2.4G)
-
Security128-bit AES with TLS/SSL
-
Operation temperatureTemperature: -10 ℃ to 50 ℃, humidity:<90% RH (non-condensing)
-
Dimensions147 x 40 x 35 mm (L x W x H)
Wireless Chime
-
Power supply110-240V AC
-
Radio frequency868MHz or 915MHz
-
Operating conditionTemperature: 0 ℃ to 50 ℃, humidity:<80% RH (non-condensing)
-
Dimensions90 x 90 x 36 (no include the plug part)
In the Box
- DB-30 Smart Video Doorbell (Battery Plus) x 1
- WL-C100 Wireless Chime x 1
- Quick Guide x 1
The complete Smanos smart home system lineup speaks minimalistic elegance, letting you self-install and self-monitor. The IP6 is an all-new addition to the Smanos wireless smart home portfolio. Download the app by searching IP6 camera" from the app store or Google Play, or just scan the QR code on the back of the box. Via the app, you get to see and hear what's happening on your property anywhere, anytime. The built-in Hi-Fi microphone and speaker ensure high-quality, 2-way audio communication and the industrial-grade SONY image sensor renders sharp video footage around the clock.
- 1-touch Wi-Fi setup for quick connection
- 720p HD video anywhere, anytime
- 2-way communication
- Super wide angle at 5 MP
- Supports on-board storage up to 32GB
- 1-touch to share unforgettable moments
- Image sensor: 1/4 in. progressive scan CMOS
- Lens: 2.4 mm F2.0
- Angle of view: 95°
- Day and night: IR cut filter with auto switch
- Video compression: H.264
- Storage: built-in micro SD card slot, up to 32GB
- Power supply: DC 12V ± 10%
- Remote Monitoring - of Your Home, Office, Family, Pets - Made Easy
SPECS
Camera connection
- Wireless Cameras
Camera resolution (TVL)
- 720
Camera Technology
- Digital
Camera Type
- CMOS
Camera Use
- Indor only Cameras
Features
- 3-Axis Adjustable Camera,HDMI Port,Night Vision,Remote Internet Viewing,USB Connection,Video Style,WiFi Enabled
Field of View
- 90 Degrees
Hardwired or Plug-in
- Plug-in
Night vision distance
- 40
Number of cameras included
- 1
Operating Range (ft.)
- 40
Shape
- Rectange
Surveillance Camera Type
- Standard
The award winning Smanos K1 wireless smart home security system is Smanos's latest wireless, integrated smart home and security gateway, combining butler and guard-like functions into aesthetically designed round discs. The Smanos K1 is compatible with Google Home, Amazon Echo and Phillips Hue, offers intuitive on-site as well as remote smartphone operation of up to 50 connected wireless, DIY friendly, battery-powered devices. This includes sensors for doors & windows, motions sensors for hallways, bedrooms and living areas. The K1 is a proud winner of Red Dot Product Design and Computex D&I Gold Awards.
Features list:
- 100% wireless
- Plug and play for quick and easy installation
- Monitor and control via free Apple & Android APP
- Compatible with Amazon Echo and Alexa
- Grant full access or restrict user permissions
- Away/Stay/Home arming options
- Schedule auto Arm/Disarm times
- Grant temporary access with time limits
- Exit and entry delay options
- Zone name and location customisation
- Two-way communication between sensors and K1 hub
- Operation and event log history
- Alarm, low battery and status alerts via APP push and email
- View UFO IP cameras from one Smanos APP
- 24hour SOS emergency triggering via APP
Package includes:
Smart Hub
Award-winning design for any home decor Plug and play
Sends push notifications and email messages when sensors are triggered
Operation and event log
Two-way communication between sensors and K1 hub
Views the doorbell and cameras from one smanos app
Accommodates customizable rules for connected devices
Grants temporary access with time limits
Door/Window Sensor
Detects openings and closings on doors or windows
Easy to install with 3M double-sided adhesive tape
Battery life up to 5 years
Tampering alarm
Security Keypad
Arms, Disarms and Home Arms the K1 system from 250 ft (80m) away (open area)
Feeds back system status
before Arming or Disarming
Unique non-numeric passcode
Battery life up to 2 years
Tampering alarm
Pet-Friendly Motion Sensor
Detects motion within 25 ft (8m)
Detection range: 90 degrees
Pet-immunity up to 55 lbs (25kgs)
Battery life up to 2 years
Mounting brackets for wall and corner
Tampering alarm
Indoor Siren
90dB loud deterrent
Battery-powered, no wires
Battery life up to 2 years
Tampering alarm
| Specs | |
| Model | Smanos K1 |
| Application | Home / Office / Unit |
| K1 Hub Communication Method | Push Notification and email via WiFi Internet Connection |
| WiFi Modes | 802.11b/g/n with WEP/WPA/WPA2 encryption 2.4GHz |
| Self-Monitored or Local Alarm | Self-Monitored with Cloud Storage |
| Internal Siren Volume | 85-95dB |
| PIR Detection Range | 8 metres outwards, 110 degree angle |
| Low Battery Notification | Yes |
| Wireless Working Frequency | 915MHz Approved for AU & NZ |
| Wireless Transmission Range | Approx. 40 metres through two walls |
| Optional Accessories | Up to 50 wireless devices |
| Back-up Battery | Yes (Approx. 24 hours standby power) |
| Power Supply | 12volt DC 500mA |
| Warranty | 2 years |
The award winning Smanos K1 wireless smart home security system is Smanos's latest wireless, integrated smart home and security gateway, combining butler and guard-like functions into aesthetically designed round discs. The Smanos K1 is compatible with Google Home, Amazon Echo and Phillips Hue, offers intuitive on-site as well as remote smartphone operation of up to 50 connected wireless, DIY friendly, battery-powered devices. This includes sensors for doors & windows, motions sensors for hallways, bedrooms and living areas. The K1 is a proud winner of Red Dot Product Design and Computex D&I Gold Awards.
MD-20 Pet-Friendly Motion Sensor
Detects for motion while allowing your pet (under 25 kgs / 55 lbs) to move about in the house with complete freedom with an industry-first round lens
- Works with the K1/K2
- Detects motion within 8 m (26 ft)
- Detection range: 90 degrees
- Pet-immunity up to 25 kgs (55 lbs)
- Battery life up to 2 years
- Mounting brackets for wall and corner
- Tamper switch & alerts
Specifications
- Model: MD-20
- Power: 3V CR123A Lithium battery x 2 pcs
- Frequency: 868MHz or 915MHz (N. America)
- Wireless range: 80 m / 262.5 ft (in open area)
- Operating conditions: temperature 0-50°C (32-122°F),
humidity < 90% RH (non-condensing) - Dimensions (L x W x H): 85 x 85 x 36mm
Description:
Leveraging proprietary infrared technology fuzzy logic and sophisticated algorithm the sensor accurately detects human body movements within an approximate range of 8 meters and effectively cuts down on interference and false alarms with automatic temperature compensation and anti-draft technology. The unit works well in the corner of a lobby hall or corridor.
Specifications:
Power Supply:DC 3V (1.5V AA battery x 2) Static Current:≤ 50 uA Alarm Current:≤ 11 mA Detection Scope: 8m/110� Transmitting Distance:≤ 80 m (open area/no interference) Radio Frequency:868 MHz (�75KHz) Housing Material:ABS plastic Operation Condition:Temperature: -10�C ~ +55�C Relative Humidity: ≤80% (Non-condensing) Detector Dimensions (LxWxH): 101.5 x 59 x 37.5 mm Bracket Dimensions (LxWxH): 60 x 29 x 27 mm|