| Frequency Range | 1710 - 2170 2300 - 2700 3300 - 3800 698 - 960 |
| Base Gain | 0 to 3 dBd |
| Nominal impedance | 50 |
| Power w | 50 |
| Nominal Gain Dbi | 5/06/2007 |
| Dimensions | 165(L) x 155(W) x 50(H) |
| VSWR | <1.8:1 / <1.5:1 / <1.8:1 |
| Termination | Single 300mm tail with N (F) connector |
| Construction | UV resistant White ASA IP55 |
| Passive IM 3rd Order (2x20W) dBc | -150 |
| Horizontal Beamwidth | 90 / 80 / 70 |
| Brand | RFI |
| Weight [kg] | 0.33 |
Sort by:
Cel-Fi GO G31-3/5/28MK-CDQ-MAR Telstra Marine Pack incl. 97cm RFI CDQ7195-W 6.5dBi White Antenna
Cel-Fi GO G31-3/5/28MK-CDQ-MAR Telstra Marine Pack incl. 97cm RFI CDQ7195-W 6.5dBi White Antenna
Cel-Fi GO Telstra Marine Pack incl. 97cm RFI CDQ7195-W 6.5dBi White Donor Antenna and RFI MAM-CDQ Knock-Down Mount + T7-4M-SMA Internal Server Antenna (G31-3/5/28MK-CDQ-MAR)
The Cel-Fi GO Telstra Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs and boats.
What's included in the pack...
G31-3/5/28MK-CDQ-MAR
1x CEL-FI-GO Telstra 3/5/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ-7195-W White Whip 97cm
1 x MAM-101 Marine Knock Down Mount incl. MM-CDQ CD Series Adaptor C/W 5m white RG58 cable terminated with a FME female connector.
1x A-88 FME male to SMA male adaptor
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- 12-24VDC
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
TELSTRA MOBILE SIGNAL AVAILABILITY
Check out the Telstra mobile signal coverage map
3-BAND CEL-FI GO MOBILE
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
SUPPORTED NETWORKS
Telstra Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
Out to Sea Coverage (from www.telstra.com.au)
Telstra's 850MHz Next G network can typically extend 20 to 70 km out to sea from mobile base stations located near the coast. However there are many factors such as the weather tides sea conditions and your antenna installation (type and height above sea level) that can significantly influence coverage data speed and performance. As a result you must not rely on the Telstra Mobile Network as a primary method of communication at sea.
To assist with your mobile services at sea you should use a directly connected external antenna – one that is omni-directional or a specialist marine antenna capable of 'tracking' to the best serving base station. The antenna should be mounted as high as possible on your vessel using marine-grade cabling and connections.
In order for a service at sea to work effectively line of sight to the terrestrial base station is required. This is influenced by the height of the serving base station land based obstructions and the general topography of the land which can block signals. Coverage will not be reliable over the horizon from a mobile base station even though it may be usable at times.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Telstra Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Warranty: 2 Years
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
View the CDQ 7100 Series Technical Data Sheet
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
G31-3/5/28MK-CDQ-MAR
1x CEL-FI-GO Telstra 3/5/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ-7195-W White Whip 97cm
1 x MAM-101 Marine Knock Down Mount incl. MM-CDQ CD Series Adaptor C/W 5m white RG58 cable terminated with a FME female connector.
1x A-88 FME male to SMA male adaptor
Cel-Fi GO Mobile Telstra + RFI CDQ7194-B (5.5dBi) Black Donor Antenna 735mm + T7-4M-SMA Internal Server Antenna (G31-3/5/28MK-CDQ4-B)
This product is End of Life (EOL) and no longer available
The Cel-Fi GO Telstra Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs and boats.
What's included in the bundle...
G31-3/5/28MK-CDQ4-B
1x CEL-FI-GO Telstra 3/5/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ7194-B Black Donor Antenna with 5M cable 735mm long
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- 12-24VDC
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
TELSTRA MOBILE SIGNAL AVAILABILITY
Check out the Telstra mobile signal coverage map
3-BAND CEL-FI GO MOBILE
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
Ge t setup in 5 easy steps
SUPPORTED NETWORKS
Telstra Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Telstra Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Warranty: 2 Years
Also available in these antenna configurations
Cel-Fi GO Mobile Telstra - No Antenna
Cel-Fi GO Mobile Telstra + T5-4M-SMA Internal Antenna
Cel-Fi GO Mobile Telstra + CD8194-B (5.5dBi) Antenna 65cm
Cel-Fi GO Mobile Telstra + CDR7194-B (5.5dBi) Antenna 70cm
Cel-Fi GO Mobile Telstra + CDQ7194-B (5.5dBi) Antenna 73cm
Cel-Fi GO Mobile Telstra + CD8195-B (5.5dBi) Antenna 89cm
Cel-Fi GO Mobile Telstra + CDR8195-B (6.5dBi) Antenna 93cm
Cel-Fi GO Mobile Telstra + CDQ8195-B (6.5dBi) Antenna 97cm
Cel-Fi GO Mobile Telstra + CD7197-B (7.5dBi) Antenna 114cm
Cel-Fi GO Mobile Telstra + CDQ8197-B (6.5dBi) Antenna 121cm
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
View the CDQ 7100 Series Technical Data Sheet
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
G31-3/5/28MK-CDQ4-B
1x CEL-FI-GO Telstra 3/5/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ7194-B Black Donor Antenna with 5M cable
Cel-Fi GO G31-3/5/28MK-CSM700 - Telstra Low Profile Vehicle Pack incl CSM700 (80mm) Antenna
Cel-Fi GO G31-3/5/28MK-CSM700 - Telstra Low Profile Vehicle Pack incl CSM700 (80mm) Antenna
Cel-Fi GO Mobile Telstra + RFI CSM700 Low Profile (80mm) Black Donor Antenna + T7-4M-SMA Internal Server Antenna (G31-3/5/28MK-CSM700)
The Cel-Fi GO Telstra Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs earth moving equipment caravans/campers and boats.
What's included in the bundle...
KIT-G31-3/5/28MK-CSM700
1x CEL-FI-GO Telstra 3/5/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CSM700-5M-SMA Low Profile Black Donor Antenna with 5M cable SMA(M) only 80mm high
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- 12-24VDC
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
TELSTRA MOBILE SIGNAL AVAILABILITY
Check out the Telstra mobile signal coverage map
3-BAND CEL-FI GO MOBILE
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
Ge t setup in 5 easy steps
SUPPORTED NETWORKS
Telstra Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Telstra Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Warranty: 2 Years.
Also available in these antenna configurations
Cel-Fi GO Mobile Telstra - No Antenna
Cel-Fi GO Mobile Telstra + T7-4M-SMA Internal Antenna
Cel-Fi GO Mobile Telstra + CD7194-B (5.5dBi) Antenna 65cm
Cel-Fi GO Mobile Telstra + CD7197-B (7.5dBi) Antenna 114cm
Cel-Fi GO Mobile Telstra + CDR7195-B (6.5dBi) Antenna 93cm
Cel-Fi GO Mobile Telstra + CDQ7195-B (6.5dBi) Antenna 97cm
Cel-Fi GO Mobile Telstra + CDQ7197-B (6.5dBi) Antenna 121c m
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
G31-3/5/28MK-CSM700
1x CEL-FI-GO Telstra 3/5/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CSM700-5M-SMA Low Profile Black Donor Antenna with 5M cable SMA(M) 80mm high
Cel-Fi GO G31-3/5/28S Stationary Telstra - No Antenna (G31-3/5/28S)
Telstra Cel-Fi GO - Stationary consists of...
G31-3/5/28S Telstra 3/5/28S Cel-Fi GO Stationary Unit. Includes 240VAC Power Pack
This product is End of Life (EOL) and no longer available
The Cel-Fi GO Stationary Smart Signal Repeater the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO Stationary leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the hbest voice and data wireless performance. Cel-Fi GO Stationary is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties government buildings agricultural settings small manufacturing operations rural areas businesses and large homes.
Features:
- 3G / 4G / 4GX Voice and Data for the Telstra Network
- Up to 1 500 m2 of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configure for Mobile or Stationary use via Wave app
- Requires additional Server and Donor antennas - available separately
*Requires additional Server and Donor antennas - available separately
Telstra Mobile Signal
Cel-Fi GO Stationary Telstra G31-3/5/28S-LPDA-DAS 11dBi LPDA7030 Directional Antenna | 6dBI DAS6938 Panel Mount Donor Antenna Bundle
This product is End of Life (EOL) and no longer available
Each G31-3/5/28S-LPDA-DAS Cel-Fi GO - Stationary Telstra LPDA/DAS bundle consists of...
G31-3/5/28S Telstra 3/5/28S Cel-Fi GO Stationary Unit. Includes 240VAC Power Pack
RFI LPDA7030-11-10SMA 11dBi Log Periodic Antenna GSM 700-1000 MHz/1500-3000Mhz. inc 10M cable terminated with SMA connector
DAS6938-SDP150-N DAS LTE Directional Panel Antenna 698-3800MHz -150dBc N type connector IP55
9207N-10 Cable Extension 10Mts - SMA Male to N Female
The Cel-Fi GO Stationary Smart Signal Repeater the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO Stationary leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO Stationary is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties government buildings agricultural settings small manufacturing operations rural areas businesses and large homes.
Cel-Fi Go Features:
- 3G / 4G / 4GX Voice and Data for the Telstra Network
- Up to 1 500 m2 of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated.
- Network Safe
- Configure for Mobile or Stationary use via Wave app
Telstra Mobile Signal
Cel-Fi GO G31-3/5/28S-LPDA-MAGS Stationary TELSTRA - 11dBi LPDA7038 | 3dBi LTE-MAGS Antenna Bundle
Cel-Fi GO G31-3/5/28S-LPDA-MAGS Stationary TELSTRA - 11dBi LPDA7038 | 3dBi LTE-MAGS Antenna Bundle
Cel-Fi GO G31-3/5/28S-LPDA-MAGS Stationary Telstra - 11dBi LPDA7038 Yagi | 3dBi LTE-MAGS Donor Antenna Bundle
This product is End of Life (EOL) and no longer available
Each Cel-Fi GO - Stationary Telstra LPDA/MAGS bundle consists of..
G31-3/5/28S Telstra 3/5/28S Cel-Fi GO Stationary Unit. Includes 240VAC Power Pack
RFI LPDA7038-11-10SMA 11dBi Log Periodic Antenna GSM 700-1000 MHz/1500-3000Mhz. inc 10M cable terminated with SMA connector
RFI LTE-MAGS-3M-SMA LTE SISO Magnetic base antenna (698-2700MHZ) inc 3M cable with SMA connector
The Cel-Fi GO Stationary Smart Signal Repeater the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO Stationary leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO Stationary is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties government buildings agricultural settings small manufacturing operations rural areas businesses and large homes.
Cel-Fi Go Features:
- 3G / 4G / 4GX Voice and Data for the Telstra Network
- Up to 1 500 m2 of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configure for Mobile or Stationary use via Wave app
Telstra Mobile Signal
Cel-Fi GO Stationary Telstra - 11dBi LPDA7038 | 6dBi DAS 6938-SOC150 Omni Directional Ceiling Mount Antenna Bundle G31-3/5/28SK-DL-1SO
This product is End of Life (EOL) and no longer available
Each Cel-Fi GO - Stationary Telstra LPDA/DAS bundle consists of...
G31-3/5/28S Telstra 3/5/28S Cel-Fi GO Stationary Unit. Includes 240VAC Power Pack
RFI LPDA7038-11-10SMA 11dBi Log Periodic Antenna GSM 700-1000 MHz/1500-3000Mhz. inc 10M cable terminated with SMA connector
DAS6938-SOC150-N DAS LTE Omni Directional Ceiling Antenna 698-3800MHz N type connector
9207N-10 Cable Extension 10Mts - SMA Male to N Female
The Cel-Fi GO Stationary Smart Signal Repeater the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO Stationary leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO Stationary is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties government buildings agricultural settings small manufacturing operations rural areas businesses and large homes.
Cel-Fi Go Features:
- 3G / 4G / 4GX Voice and Data for the Telstra Network
- Up to 1 500 m2 of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configure for Mobile or Stationary use via Wave app
Telstra Mobile Signal
CEL-FI GO STATIONARY TELSTRA - 11DBI LPDA7038 | 2x DAS 6DBI 6938-SOC150 OMNI DIRECTIONAL CEILING MOUNT ANTENNAS WITH 2-WAY SPLITTER BUNDLE (G31-3/5/28SK-DL-2SO)
This product is End of Life (EOL) and no longer available
Each Cel-Fi GO - G31-3/5/28SK-DL-2SO Stationary Telstra LPDA/DAS bundle consists of...
G31-3/5/28S Telstra 3/5/28S Cel-Fi GO Stationary Unit. Includes 240VAC Power Pack
LPDA7038-11-10SMA 11dBi Log Periodic Antenna GSM 700-1000 MHz/1500-3000Mhz. inc 10M cable terminated with SMA connector
2x DAS6938-SOC150-N DAS 6dBi LTE Omni Directional Ceiling Antenna 698-3800MHz N type connector
PSP6927-5102-N Pulse 2-Way Splitter
9207D-10 CABLE N-Male to N-Male 10M (9006)
9207D-5 CABLE N-Male to N-Male 5M (9006)
9207N-1 CABLE SMA-Male to N-Male 1M (9006)
The Cel-Fi GO Stationary Smart Signal Repeater the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO Stationary leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO Stationary is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties government buildings agricultural settings small manufacturing operations rural areas businesses and large homes.
Cel-Fi Go Features:
- 3G / 4G / 4GX Voice and Data for the Telstra Network
- Up to 1 500 m2 of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configure for Mobile or Stationary use via Wave app
Telstra Mobile Signal
Cel-Fi GO - Mobile Optus - No Antenna (G31-3/8/28M)
The Cel-Fi GO Optus Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs and boats.
What's included in the bundle...
G31-3/8/28M
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
NO ANTENNAS
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated.
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
*Requires additional Server and Donor antennas - available separately
3-Band Cel-Fi GO Mobile
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
Ge t setup in 5 easy steps
SUPPORTED NETWORKS
Optus Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Telstra Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Warranty: 2 Years
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
G31-3/8/28M
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
NO ANTENNAS
Packaging Dim. 39.5cm x 11cm x 6.5cm
Weight: 1Kg
Cel-Fi GO Mobile Optus + RFI T7-4M-SMA Internal Server Antenna (G31-3/8/28MK)
The Cel-Fi GO Optus Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs and boats.
What's included in the bundle...
OPTUS-G31-3/8/28MK
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
*Requires external Donor antenna - available separately
3-Band Cel-Fi GO Mobile
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
Ge t setup in 5 easy steps
SUPPORTED NETWORKS
Optus Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 900mhz or 4G 700mhz or 4G 1800mhz ). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Optus Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
What's in the Box
OPTUS-G31-3/8/28MK
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
Also available in these antenna configurations
Cel-Fi GO Mobile Optus + CD7195-B (6.5dBi) Antenna 89cm
Cel-Fi GO Mobile Optus + CDR7195-B (6.5dBi) Antenna 93cm
Cel-Fi GO Mobile Optus + CDQ7195-B (6.5dBi) Antenna 97cm
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
Wave App
Nextivity Wave App - iPhone Android and PC
Cel-Fi GO G31-3/8/28MK-CDQ-MAR Optus Marine Pack incl. 97cm RFI CDQ7195-W 6.5dBi White Antenna
Cel-Fi GO G31-3/8/28MK-CDQ-MAR Optus Marine Pack incl. 97cm RFI CDQ7195-W 6.5dBi White Antenna
Cel-Fi GO Optus Marine Pack incl. 97cm RFI CDQ7195-W 6.5dBi White Donor Antenna and RFI MAM-CDQ Knock-Down Mount + T7-4M-SMA Internal Server Antenna (OPTUS-G31-3/8/28MK-CDQ-MAR)
The Cel-Fi GO Optus Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs and boats.
What's included in the pack...
OPTUS-G31-3/8/28MK-CDQ-MAR
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ-7195-W White Whip 97cm
1 x MAM-101 Marine Knock Down Mount incl. MM-CDQ CD Series Adaptor C/W 5m white RG58 cable terminated with a FME female connector.
1x A-88 FME male to SMA male adaptor.
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- 12-24VDC
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
3-BAND CEL-FI GO MOBILE
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
SUPPORTED NETWORKS
Optus Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 900mhz or 4G 700mhz or 4G 1800mhz). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
Out to Sea Coverage
Mobile coverage can typically extend 20 to 70 km out to sea from mobile base stations located near the coast. However there are many factors such as the weather tides sea conditions and your antenna installation (type and height above sea level) that can significantly influence coverage data speed and performance. As a result you must not rely on the Optus Mobile Network as a primary method of communication at sea.
To assist with your mobile services at sea you should use a directly connected external antenna – one that is omni-directional or a specialist marine antenna capable of 'tracking' to the best serving base station. The antenna should be mounted as high as possible on your vessel using marine-grade cabling and connections.
In order for a service at sea to work effectively line of sight to the terrestrial base station is required. This is influenced by the height of the serving base station land based obstructions and the general topography of the land which can block signals. Coverage will not be reliable over the horizon from a mobile base station even though it may be usable at times.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Optus Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Warranty: 2 Years
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
View the CDQ 7100 Series Technical Data Sheet
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
OPTUS-G31-3/8/28MK-CDQ-MAR
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ-7195-W White Whip 97cm
1 x MAM-101 Marine Knock Down Mount incl. MM-CDQ CD Series Adaptor C/W 5m white RG58 cable terminated with a FME female connector.
1x A-88 FME male to SMA male adaptor
Cel-Fi GO G31-3/8/28MK-CDQ7-B Optus Vehicle Pack including 121cm RFI CDQ7197-B (7.5dBi) Antenna
Cel-Fi GO G31-3/8/28MK-CDQ7-B Optus Vehicle Pack including 121cm RFI CDQ7197-B (7.5dBi) Antenna
Cel-Fi GO Mobile Optus + RFI CDQ7197-B (7.5dBi) Black Donor Antenna 1210mm + T7-4M-SMA Internal Server Antenna (G31-3/8/28MK-CDQ7-B)
The Cel-Fi GO Optus Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs and boats.
What's included in the bundle...
OPTUS-G31-3/5/28MK-CDQ7-B
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ7197-B-SMA Black Donor Antenna with 5M cable SMA male 1210mm long
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
3-BAND CEL-FI GO MOBILE
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
Ge t setup in 5 easy steps
SUPPORTED NETWORKS
Optus Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Optus Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Warranty: 2 Years
Also available in these antenna configurations
Cel-Fi GO Mobile Optus + CD7195-B (6.5dBi) Antenna 89cm
Cel-Fi GO Mobile Optus + CDR7195-B (6.5dBi) Antenna 93cm
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
View the CDQ 7100 Series Technical Data Sheet
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
OPTUS-G31-3/8/28MK-CDQ7-B
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ7197-B-SMA Black Donor Antenna with 5M cable SMA male
Cel-Fi GO G31-3/8/28MK-CDR-B Optus Vehicle Pack including 93cm RFI CDR7195-B (6.5dBi) Antenna
Cel-Fi GO G31-3/8/28MK-CDR-B Optus Vehicle Pack including 93cm RFI CDR7195-B (6.5dBi) Antenna
Cel-Fi GO Mobile Optus + RFI CDR7195-B (6.5dBi) Black Donor Antenna 930mm + T7-4M-SMA Internal Server Antenna (G31-3/8/28MK-CDR-B)
The Cel-Fi GO Optus Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs and boats.
What's included in the bundle...
OPTUS-G31-3/8/28MK-CDR-B
1x CEL-FI-GO Optus 3/8/28M Optus Mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDR-7195-B Black Donor Antenna with 5M cable FME female 930mm long
1x A-88 FME male to SMA male adaptor
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
3 BAND CEL-FI GO MOBILE
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
Ge t setup in 5 easy steps
SUPPORTED NETWORKS
Optus Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Optus Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Warranty: 2 Years
Also available in these antenna configurations
Cel-Fi GO Mobile Optus + CD7195-B (6.5dBi) Antenna 89cm
Cel-Fi GO Mobile Optus + CDQ7195-B (6.5dBi) Antenna 97cm
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
RFI CDR7100 Series Technical Data Sheet
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
OPTUS-G31-3/8/28MK-CDR-B
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T7-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDR-7195-B Black Donor Antenna with 5M cable FME female
1x A-88 FME male to SMA male adaptor
OPTUS Network Cel-Fi GO - Stationary Optus - No Antenna (OPTUS-G31-3/8/28S)
The Cel-Fi GO Optus Stationary Smart Signal Repeater the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO Stationary leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO Stationary is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties government buildings agricultural settings small manufacturing operations rural areas businesses and large homes.
Features:
- 3G / 4G / 4GX Voice and Data for the Optus Network
- Up to 1 500 m2 of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configure for Mobile or Stationary use via Wave app
- Requires additional Server and Donor antennas - available separately
*Requires additional Server and Donor antennas - available separately
3-Band Cel-Fi GO Mobile
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
SUPPORTED NETWORKS
Optus Network
SPECIFICATIONS
| Available Frequency Bands (MHz) | Optus Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | GO unit + AC adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50 Ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Ge t setup in 5 easy steps
Warranty: 2 Years
Also available in these antenna configurations
Documentation
Cel-Fi GO Stationary Quick Start Guide
Cel-Fi GO Trouble Shooting Support
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
OPTUS-G31-3/8/28S
1x CEL-FI-GO Optus Band 3/8/28S Stationary unit only
1x 240VDC Power Pack
No Antennas
Packaging Dim. 39.5cm x 11cm x 6.5cm
Weight: 1Kg
Cel-Fi GO Stationary Optus - 11dBi LPDA7030 Directional Antenna | 6dBI DAS6938 Panel Mount Donor Antenna Bundle (KIT-G31-3/8/28S-LPDA-DAS)
Each Cel-Fi GO - Stationary Optus LPDA/DAS bundle consists of...
G31-3/8/28S Optus 3/8/28S Cel-Fi GO Stationary Unit. Includes 240VAC Power Pack
RFI LPDA7030-11-10SMA 11dBi Log Periodic Antenna GSM 700-1000 MHz/1500-3000Mhz. inc 10M cable terminated with SMA connector
DAS6938-SDP150-N D AS LTE Directional Panel Antenna 698-3800MHz -150dBc N type connector IP55
9207N-10 Cable Extension 10Mts - SMA Male to N Female
The Cel-Fi GO Stationary Smart Signal Repeater the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO Stationary leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO Stationary is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties government buildings agricultural settings small manufacturing operations rural areas businesses and large homes.
Cel-Fi Go Features:
- 3G / 4G / 4GX Voice and Data for the Telstra Network
- Up to 1 500 m2 of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated.
- Network Safe
- Configure for Mobile or Stationary use via Wave app
3-Band Cel-Fi GO Mobile
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
SUPPORTED NETWORKS
Optus Network
SPECIFICATIONS - Cel-Fi Go Stationary
| Available Frequency Bands (MHz) | Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | GO unit + AC adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50 Ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Specifications - LPDA7030-11-10SMA
| Nominal Gain dBd | 11dBi / 9dBd |
| Frequency MHz | 700 - 1000 / 1500 - 3000 |
| Tunable Bandwidth | Full band. |
| VSWR | <2.0:1 |
| Polarisation | Linear |
| Vertical Beamwidth | 50 (± 5) |
| Horizontal Beamwidth | 55 (± 5) |
| Front/Back Ratio dB | 20 dB (± 3 bB) |
| Power W | 10 |
| Dimensions mm | 1100 x 180 x 60 |
| Length mm | 1100 |
| Weight (kg) | 1.85 |
| Termination | 10 meters cable terminated with male SMA connector |
Specifications - DAS6938-SDP150-N
Ge t setup in 5 easy steps
Warranty: 2 Years
Documentation
Cel-Fi GO Stationary Quick Start Guide
Cel-Fi GO Trouble Shooting Support
LPDA7030-11-10SMA Technical Data Sheet
View LPDA7030-11-10SMA Installation Instructions
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
KIT-G31-3/8/28S-LPDA-DAS
1x CEL-FI-GO Optus 3/8/28S Stationary unit
1x 240VDC Power Pack
1x RFI LPDA7030-11-10SMA 11dBi Log Periodic Antenna - 10Mtr cable
1x DAS6938-SDP150-N DAS LTE Directional Panel Antenna 698-3800MHz -150dBc N type connector IP55
1x 9207N-10 Cable Extension 10Mts - SMA Male to N Female
The LPDA antenna is to be mounted vertically with tilting capability incorporated within the clamping arrangement. Mast mounting hardware is supplied to suit pole diameters of up to 60mm and includes 10 metres of low loss RG58 cable terminated with SMA male connector. (Mounting pole not included)
Mounting bracket kit including:
• 2 x Econo-brackets
• 2 x U-bolt (SS) M6x60x90mm
• 4 x M6 nuts (SS) & washers
Cel-Fi GO Stationary Optus - 11dBi LPDA7038 | 6dBi DAS 6938-SOC150 Omni Directional Ceiling Mount Antenna Bundle ( KIT-G31-3/8/28SK-DL-1SO)
Each Cel-Fi GO - Stationary Optus LPDA/DAS bundle consists of...
OPTUS-G31-3/8/28S Optus 3/8/28S Cel-Fi GO Stationary Unit. Includes 240VAC Power Pack
RFI LPDA7038-11-10SMA 11dBi Log Periodic Antenna GSM 700-1000 MHz/1500-3000Mhz. inc 10M cable terminated with SMA connector
DAS6938-SOC150-N D AS LTE Omni Directional Ceiling Antenna 698-3800MHz N type connector
9207N-10 Cable Extension 10Mts - SMA Male to N Female
The Cel-Fi GO Stationary Smart Signal Repeater the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO Stationary leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO Stationary is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties government buildings agricultural settings small manufacturing operations rural areas businesses and large homes.
Cel-Fi Go Features:
- 3G / 4G / 4GX Voice and Data for the Optus Network
- Up to 1 500 m2 of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configure for Mobile or Stationary use via Wave app
3-Band Cel-Fi GO Mobile
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
SUPPORTED NETWORKS
Optus Network
SPECIFICATIONS - Cel-Fi Go Stationary
| Available Frequency Bands (MHz) | Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | GO unit + AC adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50 Ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Specifications - LPDA7030-11-10SMA
| Nominal Gain dBd | 11dBi / 9dBd |
| Frequency MHz | 700 - 1000 / 1500 - 3000 |
| Tunable Bandwidth | Full band. |
| VSWR | <2.0:1 |
| Polarisation | Linear |
| Vertical Beamwidth | 50 (± 5) |
| Horizontal Beamwidth | 55 (± 5) |
| Front/Back Ratio dB | 20 dB (± 3 bB) |
| Power W | 10 |
| Dimensions mm | 1100 x 180 x 60 |
| Length mm | 1100 |
| Weight (kg) | 1.85 |
| Termination | 10 meters cable terminated with male SMA connector |
Specifications - DAS6938-SOC153-N
Electrical Specifications
-
Frequency Range: 698-960MHz / 1710-2700MHz / 3500-3600MHz / 5200-6000MHz
-
Max Gain: 2.0dBi / 4.0dBi / 4.0dBi / 6.0dBi
-
Input Impedance: 50 Ω
-
VSWR: <1.7:1 / <1.7:1 / <1.6:1 / <1.7:1
-
Vertical Beamwidth: 100° / 55° / 45° / 30°
-
Horizontal Beamwidth: 360°
Mechanical/Environmental Specifications
-
Construction: PC + ABS
-
Cable: 300mm
-
Input Connector: N Female
-
Weight: 0.25 kg
-
Dimensions: 89 x 184mm (H x Ø)
-
Mounting: Ceiling
Ge t setup in 5 easy steps
Warranty: 2 Years
Documentation
Cel-Fi GO Stationary Quick Start Guide
Cel-Fi GO Trouble Shooting Support
LPDA7030-11-10SMA Technical Data Sheet
LPDA7030-11-10SMA Installation Instructions
DAS6938-SOC150-N Technical Data Sheet
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
KIT-G31-3/8/28SK-DL-1SO
1x CEL-FI-GO Optus 3/8/28S Stationary unit
1x 240VDC Power Pack
1x RFI LPDA70308-11-10SMA 11dBi Log Periodic Antenna - 10Mtr cable
1x DAS6938-SOC153-N DAS LTE Omni Directional Ceiling Antenna 698-3800MHz N type connector
1x 9207N-10 Cable Extension 10Mts - SMA Male to N Female
The LPDA antenna is to be mounted vertically with tilting capability incorporated within the clamping arrangement. Mast mounting hardware is supplied to suit pole diameters of up to 60mm and includes 10 metres of low loss RG58 cable terminated with SMA male connector. (Mounting pole not included)
Mounting bracket kit including:
• 2 x Econo-brackets
• 2 x U-bolt (SS) M6x60x90mm
• 4 x M6 nuts (SS) & washers
Cel-Fi GO G31-OM-CD7-B Optus 4WD/Trucker Vehicle Pack incl 114cm RFI CD8197-B (7.5dBi) Antenna
Cel-Fi GO G31-OM-CD7-B Optus 4WD/Trucker Vehicle Pack incl 114cm RFI CD8197-B (7.5dBi) Antenna
Cel-Fi GO Mobile Optus + RFI CD8197-B (7.5dBi) Black Donor Antenna 1140mm + T5-4M-SMA Internal Server Antenna (G31-OM-CD7-B)
The Cel-Fi GO Optus Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs and boats.
What's included in the bundle...
OPTUS-G31-OM-CD7-B
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T5-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CD8197-B Black Donor Antenna with 5M cable - SMA male - 1140mm long
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
3-BAND CEL-FI GO MOBILE
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
Ge t setup in 5 easy steps
SUPPORTED NETWORKS
Optus Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 900mhz or 4G 700mhz or 4G 1800mhz). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Optus Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Warranty: 2 Years.
Also available in these antenna configurations
Cel-Fi GO Mobile Optus + CDR7195-B (6.5dBi) Antenna 93cm
Cel-Fi GO Mobile Optus + CDQ7195-B (6.5dBi) Antenna 97cm
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
View the RFI CD7100 Series Technical Data Sheet
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
OPTUS-G31-3/5/28MK-CD7-B
1x CEL-FI-GO Optus 3/8/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T5-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CD8197-B Black Donor Antenna with 5M cable - SMA connection
Cel-Fi GO Mobile Telstra + RFI CDQ8195-B (6.5dBi) Black Donor Antenna 970mm + T5-4M-SMA Internal Server Antenna (G31-TM-CDQ5-B)
This product is End of Life (EOL) and no longer available
The Cel-Fi GO Telstra Mobile Smart Signal Repeater the first carrier-class mobile cellular coverage solution to feature industry-leading 100 dB system gain and Nextivity’s unconditional network safe guarantee. Cel-Fi GO Mobile leverages artificial intelligence and award-winning Intelliboost signal processing to deliver the industry’s best voice and data wireless performance for mobile subscribers on the move. Cel-Fi GO Mobile is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for trucks vehicles RVs and boats.
What's included in the bundle...
G31-TM-CDQ5-B
1x CEL-FI-GO Telstra 3/5/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T5-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ8195-B Black Donor Antenna with 5M cable SMA male 970mm long
CEL-FI GO is a 3G/4G cellular signal amplifier that uses Nextivity's award winning technology to provide up to 100 dB of signal gain while unconditionally protecting the operator's network.
FEATURES:
- 3G / 4G / 4GX Voice and Data
- Multi-User Mobile Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- 12-24VDC
- Network Safe
- Configuration for Mobile or Stationary version via Wave app
TELSTRA MOBILE SIGNAL AVAILABILITY
Check out the Telstra mobile signal coverage map
3-BAND CEL-FI GO MOBILE
The evolved smart signal booster that can amplify cellular signals up to 100 dB.
The Cel-Fi GO has a rugged design to withstand harsh conditions including dust and water exposure. Cel-Fi GO utilizes nanotechnology to produce a thin film coating across the entire PCB assembly. This coating combined with an industrial design for harsh conditions enables the device to support weather conditions that include water dust and dirt.
Ge t setup in 5 easy steps
SUPPORTED NETWORKS
Telstra Network
IMPORTANT NOTE
Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the unit in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
SPECIFICATIONS
| Available Frequency Bands (MHz) | Telstra Band 3/8/28 |
| Frequency Range | 1800Mhz 900Mhz and 700Mhz |
| RF Gain | 100dB |
| RF Connectors | SMA |
| Power Supply | + 12V CLA adapter |
| Ambient Temp. Range | 0° to 65°C |
| Environment | IP54 |
| Weight (inc. frame) | 600gm |
| Dimensions | 255mm(W) x 87mm(D) x 28mm(H) |
| Output Impedance | 50ohms |
| Current Consumption | 15W |
| DC Supply | 9.6 to 28.8 VDC via external supply |
| Case | One piece extruded Aluminium |
| Frequency - Layered Navigation | Multiband |
Warranty: 2 Years
Also available in these antenna configurations
Cel-Fi GO Mobile Telstra - No Antenna
Cel-Fi GO Mobile Telstra + T5-4M-SMA Internal Antenna
Cel-Fi GO Mobile Telstra + CD8194-B (5.5dBi) Antenna 65cm
Cel-Fi GO Mobile Telstra + CDR7194-B (5.5dBi) Antenna 70cm
Cel-Fi GO Mobile Telstra + CDQ7194-B (5.5dBi) Antenna 73cm
Cel-Fi GO Mobile Telstra + CD8195-B (5.5dBi) Antenna 89cm
Cel-Fi GO Mobile Telstra + CDR8195-B (6.5dBi) Antenna 93cm
Cel-Fi GO Mobile Telstra + CDQ8195-B (6.5dBi) Antenna 97cm
Cel-Fi GO Mobile Telstra + CD7197-B (7.5dBi) Antenna 114cm
Cel-Fi GO Mobile Telstra + CDQ8197-B (6.5dBi) Antenna 121cm
Documentation
Cel-Fi GO Mobile Quick Start Guide
Cel-Fi GO Trouble Shooting Support
View the CDQ 7100 Series Technical Data Sheet
Wave App
Nextivity Wave App - iPhone Android and PC
What's in the Box
G31-TM-CDQ5-B
1x CEL-FI-GO Telstra 3/5/28M mobile unit
1x CEL-FI-GO 12/24VDC CLA power lead
1x RFI T5-4M-SMA Internal Server Antenna with 4M cable SMA male
1x RFI CDQ8195-B Black Donor Antenna with 5M cable SMA male 970mm long