Sort by:
About DLINK DAP-X3060 AX3000 Wi-Fi 6 Dual-Band PoE Access Point
D-LINK Wireless AX3000 Wi-Fi 6 Dual Band PoE Access Point
The Wi-Fi 6-enabled DAP-X3060 delivers incredible speeds significantly increased capacity and interference-free coverage for business environments of all sizes.
Features:
- Easy to manage with D-Link’s free software-based management solution Nuclias Connect
- The latest Wi-Fi 6 technology
- MU-MIMO design with 3000Mbps combined throughput
- Supports WPA3™ — the latest Wi-Fi encryption standard
- 2.5 Gbps LAN port
- Airtime Fairness and Band Steering technologies
- High power 23dBm design
- Powered by IEEE 802.3at P
Specifications:
- Management Options : Standalone|Software Managed|Controller Managed
- Wi-Fi Bands : Dual Band 2.4 and 5 GHz
- AP Design : Indoor|Built-in Antennas|PoE+
- Central Management : Nuclias Connect|Nuclias Connect Hub
- Wi-Fi Type : Wireless AX3000
- Antenna Type : Built-in
- Auto Channel Selection : Yes
- Dimensions (Size) : 190 x 190 x 42.8 mm
- LAN Interface : 1 x 2.5Gb
- Operation Modes : AP|WDS (Site-to-Multisite)|WDS+AP
- PoE Standard : PoE+ 802.3at
- Security : 802.1x|WPA/WPA2-EAP| WPA/WPA2-PSK|WEP|MAC filtering|WPA3
- Number of SSIDs : 16
- Warranty : Limited Lifetime
- Indoor or Outdoor : Indoor Deployment
- Wi-Fi Configuration : Wi-Fi 6|2.4 GHz / 5 GHz Dual Band|Wireless AX3000
The D-Link® Mobile Broadband Wireless Router (DIR-412) allows users to access worldwide mobile broadband1. Simply insert a compatible mobile broadband USB adapter into the DIR-412 to share your mobile broadband Internet connection through a secure, high-speed 802.11n wireless network. A 10/100 Ethernet WAN port allows you to access a DSL/Cable modem as the primary backup connection. Auto-failover ensures an uninterrupted connection by automatically connecting to your mobile broadband network whenever your Ethernet network goes down.
Advanced Network Security
The DIR-412 ensures a secure Wi-Fi network through the use of WPA/WPA2 wireless encryption. Simply press the WPS button to quickly establish a secure connection to new devices. The DIR-412 also utilizes dual-active firewalls (SPI and NAT) to prevent potential attacks and intrusions from across the Internet.
Simple to Install and Use
The Mobile Broadband Wireless Router can be installed quickly and easily almost anywhere. This router is great for situations where an impromptu wireless network must be set up, or wherever conventional network access is available. The DIR-412 can be installed on buses, trains, or boats, allowing passengers to check e-mail or chat online while commuting.
- 1 x EV-DO/CDMA
- HSUPA/HSDPA/UMTS
Standards
- 802.11n
- 802.11g
- 802.11b
- 802.3
- 802.3u
Wireless security
- 64/128-bit WEP (Wired Equivalent Privacy)
- WPA & WPA2 (Wi-Fi Protected Access)
- WPS (PBC/PIN)
Firewall
- Network Address Translation (NAT)
- Stateful Packet Inspection (SPI)
- MAC Address Filtering
- Website Filtering
VPN
- L2TP/PPTP/IPSEC VPN Pass-through
- PPTP/L2TP Connection
ANTENNA
- Internal antenna
Ports
- 1 x Ethernet (RJ-45)
- 1 x USB 2.0
LED Status indicators
- Power
- Internet
- Wireless
- Ethernet
- WPS
DIMENSIONS (L x W x H)
-
122 x 97 x 27 mm
Operating temperature
- 0° to 40°C (32° to 104°F)
Operating Humidity
- 10%-95% (Non-condensing)
Power
- DC 5V/2.5A +/- 5%
Advanced features
- 3G Modem / Ethernet WAN Backup
- Auto WAN Failover
- QoS Management
What This Product Does
The DPR-2000 Multi-port Wireless G Print Server is ideal for office, school and business deployments. It provides four high-speed USB printer connections from a single device and supports the print, scan and fax capabilities of multifunction equipment. This print server offers the easiest and most cost-effective way to share your printers and equipment across a wired or wireless network.
Share USB Printers and Multifunction Equipment
The DPR-2000 Multi-port Wireless G Print Server lets you share up to four USB printers among your office workers across a wired or wireless network. With four USB 2.0 ports, this print server can create up to four printer connections from any workstation, so users can send documents from their PC to the networked printers to print. In addition, it also supports the scan and fax functions of multifunction equipment, so users can send faxes directly from their computers, or scan images without having to attach scanners to their PC. If you plan to cluster together multiple printers or multifunction equipment at a central place, this print server can reduce costs and simplify installation.
High Performance and Ease of Use
Equipped with a powerful CPU and a large buffer RAM, the DPR-2000 performs operations quickly and efficiently. All devices attached to it can print, scan, and fax at the same time, giving you the performance of four separate single-port print servers at a fraction of the cost. For wireless connections, an integrated Wi-Fi Protected Setup (WPS) function allows you to set up a secure connection from this print server to your wireless router or access point, and then on to all wireless users, in a matter of minutes.
Access Security and Multiple OS Support
The DPR-2000 provides the necessary security by allowing the administrator to configure user access right to the network printers and equipment. It supports a wide range of network operating systems, including Windows, Mac OS, Linux and Unix. Operation is completely transparent, so users can enjoy hassle-free performance, flexibility and compatibility.
Remote Printing Support
The DPR-2000 supports the Internet Printing Protocol (IPP), enabling remote users to output files to their office printers even when they are away from the office. This print server also provides network administrators with critical information about the networked printers so they can monitor the printers’ operation in a timely manner.
SPECS
LAN Type
- 10/100 / Wireless LAN
Wireless LAN
- Yes
Number of LAN Connections
- 1
Wireless Speed
- 54 Mbps
Wireless Standards
- N/A
Aprox Wireless Range (m)
- N/A
Other Connectors
- 4 x USB 2.0
Security
- WEP (128 bit)
- WEP (64 bit)
- WPA
- WPA2
About DLINK DXS-3410-32SY Switch
DLINK 32-Port 10 Gigabit Layer 3 Stackable Managed Switch with 28 10Gb SFP+ Ports and 4 10/25Gb SFP28 Ports
Features:
- 10 Gigabit Layer 3 Stackable Switch
- 28 10Gb SFP+ ports
- Four 25Gb SFP28 uplink ports
- Stackable up to 9 units (physical) 32 units (virtual)
- Supports long-distance stacking over fibre
- 200 Gbps per device stacking bandwidth
- Lossless Ethernet via Data Center Bridging (DCB)
- Redundant power supply support
- Easy-to-use web GUI
- Industry standard CLI
Specifications:
- 802.1X Access Control : Yes
- Guest VLAN : Yes
- IP Interfaces : Yes
- Layer 3 Switching : Yes
- Redundant PSU : Yes
- Routing Table Size : Yes
- Stacking : Physical and Virtual
- Stacking Capacity : Physical (9) Virtual (32)
- Number of Ports : 24 - 32
- Type of Port Required : 10 Gigabit Fibre|25 Gigabit SFP28
- Redundant Power Supply : Yes
- Stacking Bandwidth : 200 Gbps
- Switch Type : Layer 3
- Switch Series : DXS-3600 Series
- 10 Gig ports : Yes
- Layer : Layer 3
- SFP+ ports : 28
- Cable Diagnostics : Yes
- Command Line Interface : Yes
- DHCP Server Screening : Yes
- Dimensions (Size) : 441 x 250 x 44 mm
- Energy Saving Technology :EEE Compliant|RoHS 6 Compliant
- Fans : 3
- IGMP Snooping : Yes
- Jumbo Frame : 10000 bytes
- Link Aggregation : Yes
- QoS : Yes
- 19'' Rack Mountable : Yes
- Warranty : Limited Lifetime
- SNMP : Yes
- Spanning Tree Protocol : Yes
- Switching Capacity : 760 Gbps
- VLAN : 4K Groups
- Voice VLAN : Yes
- Web-based GUI : Yes
The DOME Z-Wave Mouse Zapper is a Z-Wave Plus (500 series) compatible, battery-powered electronic mouse trap.
- A BETTER MOUSE TRAP - Keep your kitchen and eating areas sanitary with a mousetrap that doesn’t leave you with blood or half-dead mice to deal with
- ELIMINATE RODENTS FROM RESTAURANTS - Electrocutes mice, rats, and other rodents quickly and effectively
- NO MORE SNAPPING YOUR FINGERS - Rat traps have moved beyond chasing away critters with loud sounds or using spring traps that are better at catching a pinky than a mouse
- SMART-HOME CONFIGURABLE - Connect this smart pest control device to your Z-Wave Hub to receive notifications when the trap is occupied. Integrates with SmartThings, Home Seer, Nexia, and other hubs
- UP TO 150-FOOT Z-WAVE RANGE - Set it up to work with your Z-Wave network or use it on its own, you can always upgrade to smart home connectivity later
The DOME Z-Wave Mouse Zapper is the smart, mess free way of removing rats from your home or business. Dome Smart Mouse Trap Taking care of critters in your kitchen and dining area is no pleasant task, but there’s a better way to do it that won’t leave you cleaning up blood or unsticking mice from a glue strip. The Dome Home Automation Mouse Trap eliminates mice quickly and effectively. Set this smart-home mouse trap up to work with your current Z-Wave automation hub, if applicable, or use it without connectivity. Either way, you get an efficient and mess-free pest control solution to keep rodents out of your cupboards and away from food and cooking tools. Commercial kitchens, restaurants, and many other types of businesses must be up to sanitation standards, and it’s easier to do with the Dome Home Automation Z-Wave Smart Electronic Mouse Trap. When connected to your Z-Wave Hub, you can get notifications when something’s been caught and it’s time to empty the trap. No stinker to find days or weeks later. Use with most any Z-Wave Hub including: Vera, Fibaro HC2, Home Seer and more.
- Battery powered
- Quick and mess free
- Notification when a rodent is caught
- Three second delay before zap keeps pets and children safe
- Z-Wave Plus certified
This device delivers a powerful electric shock which knocks out rodents in seconds and sends you a notification through your Z-Wave network so you know when to empty it. The DOME Z-Wave Mouse Zapper is designed to be easy to maintain, you can replace the bait and dispose of zapped rats without having to touch them.
The DOME Z-Wave Mouse Zapper is perfect for businesses. Maintain sanitary standards in restaurants, commercial kitchens, and other businesses without the hassle of traditional traps. Set up multiple traps and only check them when something is caught.
This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controller including:
- Vera Edge/Plus
- Fibaro Home Center 2/Lite
Note: This device can also be used without a Z-Wave gateway. When the trap is tripped, a blinking LED will remind you to empty the trap, and you can always integrate it with a Z-Wave gateway later on.
Technical Specifications
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave Multilevel sensor
|
|
Power
|
4 x AA batteries (not included)
|
|
Battery Life
|
~2 years (50 zaps)
|
|
Operation Range
|
Up to 40m indoors (with no obstacles)
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
5 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 50 °C
|
|
Weight
|
500g
|
|
Dimensions
|
216mm x 115mm x 127mm (265X145X150mm)
|
|
Housing
|
ABS
|
DOME Z-Wave Wireless Motion and Light Sensor for SmartHome Hub with Notification
$99.95
Unit price perDOME Z-Wave Wireless Motion and Light Sensor for SmartHome Hub with Notification
$99.95
Unit price perThe DOME Z-Wave Multi-Sensor is a versatile, battery-powered sensor designed for security and lighting automation applications.
The DOME Z-Wave Multi-Sensor is a versatile, battery-powered sensor designed for security and lighting automation applications. Dome Z-Wave Motion Detector / Light sensor works with Vera Edge/Plus and Wink! Your home security system just got bumped up a notch. If anyone is moving along where they shouldn't be, you'll know about it. Lights will go on and sirens will blare--should you choose, or maybe just a notification to your smartphone will be enough, but you get the picture. With the Dome Home Automation Motion Detector, you can program your Z-Wave hub to light the way when you enter a room, automatically turn on only the lights you want to, and turn them off when you leave. Built-in ambient light sensors dim lights to their perfect brightness Set it up to monitor your windows and doors, illuminate a hallway, or measure light levels so you're not wasting resources. It's like a camera, laser, and assistant in one, but cheaper and less intrusive. Use with most any Z-Wave Hub including VeraEdge/Plus, Fibaro HC2, Wink, Home Seer, SmartThings, Harmony and more (subject to local RF availability). Three-Year Battery Life and up to 50 m range. Ambient light detection and advanced configuration settings may not be available through all smart Hubs.
- Built-in ambient light sensor
- Z-Wave Plus certified
- Large 110° detection area
- Adjustable sensitivity
The DOME Z-Wave Multi-Sensor is a Z-Wave Plus (500 series) compatible, battery-powered sensor designed for security and lighting automation applications.
This sensor can be configured to alert you when it detects a motion and/or to trigger a siren in your Z-Wave network to scare off an intruder.
Meanwhile, the built-in ambient light sensor allows this device to not only turn on your lights when you enter a room but also to automatically dim them to an appropriate level.
This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controller including:
- Vera Edge/Plus
- Fibaro Home Center 2/Lite
Technical Specifications
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave Multilevel sensor
|
|
Power
|
1 x CR123 3.0V battery (included)
|
|
Operation Range
|
Up to 40m indoors (with no obstacles)
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
5 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 50 °C
|
|
Weight
|
100g
|
|
Dimensions
|
45mm sphere
|
|
Housing
|
ABS
|
The DOME Z-Wave Siren is a versatile Z-Wave siren designed to alert you to more than just intruders. Release the power of your Z-Wave home security system with a siren that firmly reminds you something’s amiss or blares when trouble’s coming. The Dome Home Automation Wireless Z-Wave Battery Powered Home Security Siren works with your other security hub’s components to alert you when a door is ajar, there’s someone on your property or you have a home invasion. No need to look at your phone to know when it’s time to take action. Hear the signal and heed the call. The Dome Home Automation Battery-Powered Siren updates you with your choice of three volume levels and you can choose specific chimes for various notifications. Configure your siren to quietly let you know when your teen has left the building or has returned. Make sure you’re alerted if your bedroom window is opened at night. The siren and flashing LED lights can be set up to clue you in on doors that are open when they shouldn’t be. Install it easily without wires, anywhere, and its low footprint renders it almost invisible. Use with most any Z-Wave Hub including: Vera, Fibaro HC2, Wink, Home Seer, SmartThings, Harmony and more. Secondary Chimes, volume control and advance configuration settings my not be available through all smart Hubs. Visit Dome's How-to page for more information.
- Battery powered
- Z-Wave Plus certified
- Three different volume levels (90, 100 and 105 dB)
- Features ten unique chimes
The DOME Z-Wave Siren is a Z-Wave Plus (500 series) compatible, battery-powered siren designed to alert you to more than just intruders.
Know when a door opens, someone pulls into the driveway, or if there is a break-in, all without looking at your phone. With three volume levels and ten different chimes, a single DOME Z-Wave Siren can alert you to many different events in your home.
Never leave the garage door open at night again. Configure the DOME Z-Wave Siren to automatically sound a chime if the garage door is left open after sunset.
This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controller including:
- Vera Edge/Plus
- Fibaro Home Center 2/Lite
Technical Specifications
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave siren
|
|
Power
|
2 x CR123 3.0V battery (included)
|
|
Operation Range
|
Up to 40m indoors (with no obstacles)
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
5 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 50 °C
|
|
Weight
|
125g
|
|
Dimensions
|
70mm x 70mm x 31mm
|
|
Housing
|
ABS
|
The DOME Z-Wave Water Sensor is a compact, battery powered water leak sensor. Dome Leak Sensor now officially works with Vera and Wink Z-Wave Gateways! The Dome Home Automation Wireless Z-Wave Leak Sensor with Remote Probe helps you cap leaks before they turn into gushes, so you can keep a lid on the amount of money you spend on water-related repairs. Use this battery-powered, smart-home leak detector anywhere you need to monitor water lines for potential problems. Its low-profile design allows you to hook it up underneath appliances and a 4-foot range remote sensor probe makes it easier to monitor water activity in hard-to-reach places like sump pumps. Toilets, refrigerators, water heaters, and other appliances and fixtures that require water lines can generate costly bills from ongoing small leaks and unexpected major breaks. The Dome Home Automation Water Resistant Leak Sensor keeps you up to date on the health of water lines leading in and out of these systems, and it sends you customized alerts via your connected Z-Wave Hub. Shut off main valves and take action when required. Use with most any Z-Wave Hub including: Vera, Wink, Fibaro HC2, Home Seer, SmartThings, Harmony and more (subject to local RF availability) .
- Built-in buzzer to alert those nearby
- Includes remote sensor probe for tight spaces
- Z-Wave Plus certified
- Water resistant
Product Details
The DOME Z-Wave Water Sensor is a Z-Wave Plus (500 series) compatible water sensor with a remote sensor probe for tight spaces. Simply place the device in a leak prone area and receive a notification from your Z-Wave network when a leak is detected allowing you to respond and prevent large scale water damage.
Know when the sump pump fills up, BEFORE it overflows. Dangle the remote sensor probe in the tank to receive a notification and hear an alarm if the water level rises higher than it should.
Use this device alongside a DOME Wireless Water Valve to automatically close your water valve when a leak is detected to greatly decrease the extent of water damage. Sleep easy knowing that your home is safe from water damage even when you are on vacation.
This product is compatible with all Australian certified (921.42MHz) Z-Wave and Z-Wave Plus controller including:
- Vera 3/Lite/Edge
- Fibaro Home Center 2/Lite
Technical Specifications
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave sensor
|
|
Power
|
1 x CR2 3.0V battery (included)
|
|
Operation Range
|
Up to 40m indoors (with no obstacles)
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
5 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 50 °C
|
|
Weight
|
80g
|
|
Dimensions
|
67mm x 67mm x 26mm
|
|
Housing
|
ABS
|
Description
Quick Overview
Dozer is the elegant smart building control and visualization center for your high-end projects.
Control your home automation system with Dozer a stylish Android wall panel. Its 22” touch display enables the best possible overview of your smart home. Dozer enables you to install your own Android apps and it can also serve as an internal intercom unit.
Product Details
Control From Your Favourite Mobile Platform or With Your Voice
You can use free bOS Client apps on any mobile device – iOS Android and Windows. And you can install them on as many mobile devices as you like no limitations. You can also you use Amazon Alexa or Google Assistant to control your smart building.
Product Support
Wiring diagram
Manuals:
Videos / Youtube:
⇒ ComfortClick YouTube Presentation
Technical Specifications
| Frame Size | 605 x 372 x 5 mm (WxHxD) |
| Flush-mounted box size: | 590 x 355 x 100 mm (WxHxD) |
| Touch Display: | 21 5″ (54 61cm) 1920×1080 |
| CPU: | Rockchip RK3288 – Quad-core 1.8 GHz ARM Cortex-A17 |
| RAM: | 2 GB |
| Disk size: | SD card 32 GB |
| Connectors: | 1 x Ethernet port |
| OS: | Android 6.0 |
| Power: | 100-240V 50/60 Hz |
| Power consumption: | approx. 40 W |
| Product # | CC-D-1 |
@372/395
Advanced
AU$33 / user / month
Sophisticated admin and audit capabilities to manage complex teams and data security.
- 3+ users
- As much encrypted storage as needed
Dropbox for Business gives you the freedom to share in a team environment. No matter the file type. From large CAD drawing to 4K video, it lets your team works synchronised harmoniuosly without worries.
180 days file recovery and version history to let you recover older versions and restore deleted files.
Remote device wipes to clear files from lost or stolen devices to keep company data safe.
Ransomware proof using Dropbox rewind to recover and reversing all changes to your content at the folder or account level.
Document Watermarking to protect your IP before sharing with collaborators or clients.
Account transfer to easily transfer files from one user to another when the user's responsibilities change.
File requests to collect files from multiple people, even those without a Dropbox account, while keeping file submissions visible only to you.
Smart Sync to access all your Dropbox files right from your desktop without taking up all your hard drive space.
Device approvals to let administrators control the number of connected devices and what happens to disconnected devices.
Track traffic and insights to see who's visited your shared links and whether they viewed or downloaded, and their viewing history.
Allows teams to have multiple admin roles, each with a different set of permissions.
And get unlimited access to dropbox productivity partner ecosystem with app integrations for Communication, Workflow, Project Management, CRM, Productivity, Education, Media & Design, Finance, eSignature, and Marketing solutions.
Standard
AU$21 / user / month
Easy-to-use team management and collaboration tools to help growing teams stay organized.
- 3+ users
- 5 TB (5,000 GB) of encrypted storage
Dropbox for Business gives you the freedom to share in a team environment. Quickly store and share files without the need for buying extra hard disks.
180 days file recovery and version history to let you recover older versions and restore deleted files.
Remote device wipes to clear files from lost or stolen devices to keep company data safe.
Ransomware proof using Dropbox rewind to recover and reversing all changes to your content at the folder or account level.
Document Watermarking to protect your IP before sharing with collaborators or clients.
Account transfer to easily transfer files from one user to another when the user's responsibilities change.
File requests to collect files from multiple people, even those without a Dropbox account, while keeping file submissions visible only to you.
Smart Sync to access all your Dropbox files right from your desktop without taking up all your hard drive space.
And get unlimited access to dropbox productivity partner ecosystem with app integrations for Communication, Workflow, Project Management, CRM, Productivity, Education, Media & Design, Finance, eSignature, and Marketing solutions.
More magical than ever.
Now with more talk time, voice‑activated Siri access — and a Wireless Charging Case — AirPods deliver an unparalleled wireless headphone experience. Simply take them out and they’re ready to use with all your devices. Put them in your ears and they connect immediately, immersing you in rich, high-quality sound. Just like magic.
Wireless to the fullest.
After a simple one-tap setup, AirPods are automatically on and always connected.1 Using them is just as easy. They sense when they’re in your ears and pause when you take them out. And the AirPods experience is just as amazing whether you’re using them with your iPhone, Apple Watch, iPad or Mac.
Your right‑hand Siri.
Need a hand? Simply say “Hey Siri” for assistance without having to reach for your iPhone. And with Announce Messages, Siri can automatically read your incoming messages to you as they arrive. You can choose which contacts you hear them from, and Siri won’t interrupt you if you’re on a call or sharing a song.2
Performance you’ll want to hear.
Powered by the Apple H1 headphone chip, AirPods deliver a faster and more stable wireless connection to your devices — up to twice as fast when switching between active devices3, and a 1.5 times faster connection time for phone calls.4 The H1 chip also drives voice-enabled Siri access and delivers up to 30 per cent lower gaming latency.5 So whether you’re playing games, listening to music or enjoying podcasts, you’ll experience higher-quality sound.
The power of 24‑hour battery life.
AirPods deliver an industry-leading7 five hours of listening time8 — or up to three hours of talk time9 — on one charge. And they’re made to keep up with you, thanks to a charging case that holds multiple charges for more than 24 hours of listening time.10 Need a quick charge? Just put AirPods back in the case for 15 minutes to get up to three hours of listening time11 or up to two hours of talk time.12 To check the battery, hold the AirPods next to your iPhone or ask Siri “How’s the battery on my AirPods?”
Instant setup. Easy listening.
AirPods connect immediately to your iPhone or Apple Watch, and sound switches seamlessly between the devices. Want to listen to your Mac or iPad? Just choose AirPods on those devices.1 Easy setup, magical results.
Two can play this song.
With Audio Sharing13, you can easily share a song, podcast or other audio stream between two sets of AirPods — each with independent volume control. If your AirPods are in their case, just bring them close to the iPhone or iPad you want to share with and connect in a tap. And if your AirPods are in your ears, bring your iPhone close to the device instead.
Keep your tablet and phone charged at the same time while travelling with this 3.1 Amp, fast, high power, stylish dual USB car charger . The Body is made out of high grade aluminum which is light weight and duable. the one piece design makes it look fantastic with no gaps or moving parts.
Two high powered USB sockets can charge your tablet Designed to keep your mobile devices fully charged while commuting or during long car journeys - the Dual USB Charger for iPad and other available tablets features a fast high powered 5V/ 3.1A output, which ensures that even your tablet devices have sufficient battery life. The upper port on the charger is designed specifically for charging tablets, while the bottom is designed for mobile phone and other devices.
Designed to charge two devices at the same time As well as supporting the charging of your iPad or tablet, each port can charge a smartphone or USB gadget. This means that while on the road, you can keep both your tablet and smartphone fully charged for important business meetings or simply for personal use.
3.1 Amp output for charging high power devices including iPads When using a single port, this charger will deliver a 3.1 amp output to charge iPads and other large tablets quickly. LED indicator shows charging status An LED indicator on the front face of the charger will glow blue to show when devices are charging..
Small, discreet and manufactured to a high quality The small and discreet design means that it's easy to swap between cars and is also simple to store away. The charger is manufactured to the highest possible quality and includes reliable over-current / over-temperature / short-circuit protection when in use.
To fully understand the benefits of fast 3.1 Amp chargers please read our in depth blog article Technical Specifications:
- Power: 15W
- Input voltage: 12 to 24V DC
- Output: 5V, total 3.1A
- Dimensions: 63.5 x 31mm
- Weight: 21.3g
Dual USB Car Charger
Two high powered USB sockets can charge your tablet
Designed to keep your mobile devices fully charged while commuting or during long car journeys - the Avantree Dual USB Charger for iPad and other available tablets features a fast high powered 5V/ 3.1A output, which ensures that even your tablet devices have sufficient battery life.
The upper port on the charger is designed specifically for charging the iPad, while the bottom is designed for Android tablets.
Designed to charge two devices at the same time
As well as supporting the charging of your iPad or tablet, each port can charge a smartphone or USB gadget. This means that while on the road, you can keep both your tablet and smartphone fully charged for important business meetings or simply for personal use.
3.1 Amp output for charging high power devices including iPads
When using a single port, this charger will deliver a 3.1 amp output to charge iPads and other large tablets quickly.
LED indicator shows charging status
An LED indicator on the front face of the charger will glow red to show when devices are charging and once fully charged, the LED indicator will glow green to signal that the devices are ready to be used.
Small, discreet and manufactured to a high quality
The small and discreet design means that it's easy to swap between cars and is also simple to store away.
The charger is manufactured to the highest possible quality and includes reliable over-current / over-temperature / short-circuit protection when in use
Dual USB 2.1A Mobile Device Charger (AU safety approved)
Dual USB port 2.1Amp 10.5Watt AC Charger for Mobile devices.
Dual USB port.
Input voltage 100-240AC 50/60 Hz 0.3A.
Outupt DC 5Volt 2.1A high speed charge.
C tick approved (Australian and New Zeland safety standard approved).
Include Micro USB cable, Apple cable sold seperately.
USB port is compatible with any USB data cable and apple data cable.
Competable with but not limited to:
Apple: iPhone 4, iPhone 5, iPhone 5s, iPhone 5c, iPod touch, iPad 2, iPad 3, iPad 4, iPad Air, iPad mini, iPad mini2
Samsung: Galaxy Mega, Galaxy Note 8.0, Galaxy SII 4G, Galaxy S III i9300, Galaxy Tab 3 8.0,Galaxy Express, Galaxy S III 4G i9305, Galaxy Tab 3 7. Galaxy S II i9100, Galaxy S 4 Mini-Optus,Galaxy S 4 Active, Galaxy S4 Mini-Telstra, Galaxy Tab 3 10.1, Galaxy S 4 i9500, Galaxy S5.
HTC: One, One Max, One M8
Blackberry: Z10, Z30, Playbook, 9900

