The GOAP Double Switch is Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.
This module is designed to be mounted behind a traditional wall switch. The module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as a repeater in order to improve range and stability of Z-Wave network.
Supported switches
The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.
Product Details |
Product Support |
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Strengthens Z-Wave Connectivity
The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you the flexibility to extend the range of your Z-Wave network.
The GOAP double switch is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA).
Note!
Do not connect the module to loads exceeding recommended values. Connect the module only in accordance with the manual. Use only qualified electrician!
Technical Specifications |
Product Name
|
Z-Wave Dbl Switch
|
Powered by
|
24V DC or 240V AC
|
Operation Range
|
30m
|
Max Load
|
2300W (230VAC)
|
Radio frequency
|
921.42 MHz (AU/NZ Z-Wave)
|
Power Consumption
|
0,4W
|
Operation temperature
|
-10 -+40 C*
|
Measured temperature range | 0,5o C (within 0o C - 40o C range) (optional sensor) |
Temperature measuring accuracy
|
0,5 C
|
Housing
|
ABS
|
Dimensions (W x H x D)
|
41.8 x 36.8 x 15.4 mm
|