The Cel-Fi GO for Telstra Smart Repeater is the ideal product to boost and distribute a 3G/4G mobile signal within your building. Supporting voice and mobile internet for multiple mobile devices, boosting your indoor mobile coverage has never been easier.
The Cel-Fi GO Smart Signal Repeater, the first carrier-class indoor/outdoor cellular coverage solution to feature industry leading 70-100 dB system gain and Nextivity’s unconditionally network safe guarantee. Cel-Fi GO Stationary leverages the award-winning Intelliboost signal processing to deliver the industry’s largest coverage footprint with the best voice and data wireless performance. Cel-Fi GO Stationary is IP54 rated weather resistant and does not interfere with other wireless devices. This multi-band solution is ideal for use in commercial properties, government buildings, agricultural settings, small manufacturing operations, rural areas, businesses, and large homes.
- 3G / 4G / 4GX Voice and Data
- Up to 15,000 ft2 (1,500 m2) of Coverage
- Multi-Band Support
- Indoor / Outdoor IP54 Rated
- Network Safe
Cel-Fi is the only consumer mobile phone repeater that has been widely approved by all mobile carriers in Australia. Currently approved for use on the Telstra mobile networks, Cel-Fi is a new type of mobile enhancement device called a Smart Repeater. There are other non-compliant consumer repeaters that appear to be from Australia, buying non Cel-Fi repeaters may result in large fines and loss of the equipment.
What is a Smart Repeater?
A Smart Repeater is a new type of mobile phone repeater that is designed to complement an existing mobile network and not interfere with its operation. It does this by monitoring the base station levels in real time, only repeating the signal of one particular carrier and having inbuilt protection to ensure it does not overload or interfere with network operation. Cel-Fi is currently the only Smart Repeater in existence.
Increases Mobile Data Speeds
Slow internet speeds on your mobile device are often caused by low signal. If you suffer from low signal on the go, you will be able to relate to the frustration of trying to access email or the internet. Cel-Fi GO will amplify the available LTE or HSPA mobile signal and increase your data speeds.
Note: The 4G/LTE Bands can only be utilised for data (not calls) unless both the smart phone and the local network support Voice over LTE (VoLTE)
Extends Mobile Phone battery life
Mobile phones use a lot more energy when in poor signal areas. The phone adjusts its internal power to compensate in an attempt to boost the poor signal. As a result the phone will consume a lot more battery power. Using the Cel-Fi system your indoor mobile signal should be high and the battery will last noticeably longer for you to talk. check Facebook and browse the internet.
Eliminate Dropped or Missed Calls
Never miss or lose an important call because of coverage issues again. The Cel-Fi will provide continuous coverage throughout your home or office, so you can be contacted when required. No longer do you have to put up with calls dropping out or terminating during conversation.
Introduction Video:
FEATURES
- Designed for building and site
- 100dB of system gain
- Includes external and internal antennas
- Locked to Telstra's Mobile Network
- ACMA and Carrier approved
- Band Selection Button
SUPPORTED NETWORKS
Telstra, Aldi Mobile, Boost Mobile, Woolworths Connect
Important Note
Cel-Fi GO will boost a single band at a time (either 3G 850 or 4G 700 or 4G 1800). It is highly recommended to leave the GO in 3G mode to ensure voice calls are received. Voice on 4G (VoLTE) will only work in selected areas and with later model phones.
How does the customer activate the unit?
1. Download the WAVE App from the Apple or Android store
Run the App next to the Cel-Fi and it will connect via Bluetooth. Power up GO and connect using WAVE App to register
2. Once connected it will pop up with the registration form to complete. Note this form is much shorter than the original web-based form
3. Complete and submit the form
4. The unit will now be active within 30 seconds
IMPORTANT: Internet access is required to run the WAVE app
SPECS
Cellular bands
- 3G 850 & 4G 700/1800 MHz (one frequency band at a time)
Power
- 12 DVC via external supply
- External supply: 100 to 240 VAC, 47-63Hz
- Power consumption less than 15W per unit
Antenna requirements
- SMA Female Outdoor Antenna Connector
- SMA Female Indoor Antenna Connector
- Approved antenna are supplied with the units
Manufacturer
- Nextivity
Model
- Cel-Fi Go Stationary
Antenna Port
- 2 x SMA Female
Optional Outdoor Antenna Package
WideBand LPDA Outdoor Antenna Pack includes:
- Blackhawk Indoor Wall Mount 698-4000MHz 5/7dBi Panel Antenna
- Blackhawk Outdoor Wideband LPDA 698-2700 8/9dBi Antenna,
- 6m LMR240 cable x 1, 10m LMR240 cable x 1
Yagi Outdoor Antenna Pack includes:
- Blackhawk Indoor Wall Mount 698-4000MHz 5/7dBi Panel Antenna
- Blackhawk Outdoor Yagi low band 698-890MHz Antenna 14dBi ,
- 6m LMR240 cable x 1, 10m LMR240 cable x 1
LPDA Outdoor Antenna Pack includes:
- Blackhawk Indoor Wall Mount 698-4000MHz 5/7dBi Panel Antenna
- Blackhawk LPDA 698-4000, 12/14dBi
- 6m LMR240 cable x 1, 10m LMR240 cable x 1
MARS + LPDA Outdoor Antenna Pack includes:
- Blackhawk Indoor Wall Mount 698-4000MHz 5/7dBi Panel Antenna
- Blackhawk Outdoor LPDA 698-4000, 12/14dBi
- MARS Outdoor Panel Antenna 698-2700 5dBi plus mount
- NSTOCK Wireless 700-2700Mhz 2 Way DAS Splitter/Combiner SMA/F, RoHS
- 6m LMR240 cable x 1, 10m LMR240 cable x 2
Omni Outdoor Antenna Pack includes:
- Blackhawk Indoor Wall Mount 698-4000MHz 5/7dBi Panel Antenna
- Blackhawk Outdoor Omni High Gain Antenna, 698-2700 6dBi
- 6m LMR240 cable x 1, 10m LMR240 cable x 1
Additional MARS Antenna is cabled to the outdoor area and boosts a targeted signal external to the building. This set up has been used successfully in cattle-yard, farming and residential applications.
MARS + Yagi Outdoor Antenna Pack includes:
- Blackhawk Indoor Wall Mount 698-4000MHz 5/7dBi Panel Antenna
- Blackhawk Outdoor Yagi low band 698-890MHz Antenna 14dBi
- MARS Outdoor Panel Antenna 698-2700 5dBi plus mount
- NSTOCK Wireless 700-2700Mhz 2 Way DAS Splitter/Combiner SMA/F, RoHS
- 6m LMR240 cable x 1, 10m LMR240 cable x 2
MARS + LPDA Outdoor Antenna Pack includes:
- Blackhawk Indoor Wall Mount 698-4000MHz 5/7dBi Panel Antenna
- Blackhawk Outdoor LPDA 698-4000, 12/14dBi
- MARS Outdoor Panel Antenna 698-2700 5dBi plus mount
- NSTOCK Wireless 700-2700Mhz 2 Way DAS Splitter/Combiner SMA/F, RoHS
- 6m LMR240 cable x 1, 10m LMR240 cable x 2
MARS +Omni Outdoor Antenna Pack includes:
- Blackhawk Indoor Wall Mount 698-4000MHz 5/7dBi Panel Antenna
- Blackhawk Ourdoor Omni High Gain Antenna, 698-2700 6dBi
- MARS Outdoor Panel Antenna 698-2700 5dBi plus mount
- NSTOCK Wireless 700-2700Mhz 2 Way DAS Splitter/Combiner SMA/F, RoHS
- 6m LMR240 cable x 1, 10m LMR240 cable x 2
