Networking

Description::The Nextivity CEL-FI GO G41 Building Yagi Pack including a ceiling dome antenna is the perfect solution for enhancing indoor cellular coverage for Telstra Optus and Vodafone networks. Designed to improve connectivity in homes offices and commercial buildings this pack features higher output power allowing multiple service antennas to be run from a single repeater. By popular demand the GO G41 also includes an RJ45 Ethernet port for easy remote management and monitoring.Key Features:700L/850/900/1800/2100/2600 MHz (700 band not supported on Vodafone)3G 4G VoLTE NB-IoT (G41 has 5G capabilities but is currently not enabled or approved)Carrier Switching using WAVE App between Telstra Optus or Vodafone - one carrier at a timeUp to 3000 m2 coverage areaTwo bands simultaneous relayTotal System Relay Bandwidth – Up to 40 MHzRemote Monitoring Control and Alert Capabilities via WAVE Portal (for approved installers)Ethernet Port for connection to internet source for live monitoringPowertec exclusive offer - 1-Year extra FREE WARRANTY (for a total of 3 years)Say Goodbye to Dropped Calls and Slow Data SpeedsExperience seamless communication and faster data transfers with the CEL-FI GO G41. This advanced repeater boosts signal strength minimising dropped calls and improving internet speeds making it ideal for locations with weak cellular signals. Whether you're in a residential or commercial setting the CEL-FI GO G41 ensures you stay connected like never before.Future-Ready 3G/4G/5G Voice and Data PerformanceThe CEL-FI GO G41 delivers class-leading 3G 4G and 5G voice and data performance supporting 5GNR operation for future network migration and consistent connectivity. With carrier switching capabilities via the WAVE App you can easily switch between Telstra Optus and Vodafone networks (one carrier at a time) ensuring optimal signal strength regardless of your service provider.Extensive Coverage with Remote Management CapabilitiesOffering up to 3000 m² of coverage the CEL-FI GO G41 supports two bands of simultaneous relay and up to 40 MHz of total system relay bandwidth. It also provides remote monitoring control and alert capabilities via the WAVE Portal for approved installers ensuring easy management of your cellular coverage solution. This pack includes everything you need for enhanced connectivity including a high-performance Yagi antenna ceiling dome antenna coaxial cables and power supply.Pack Includes:Nextivity CEL-FI GO G41-JE - Switchable between Telstra Optus and Vodafone-TPG (one carrier at a time)Ceiling Dome 698-4000MHz Antenna -150dBc PIMYagi 698-960MHzPTL-240 10m + 6m Coaxial Cable N male to SMA Male1m Ethernet cable240v Power Supply Read more

Specification:Enhance cell signal reception with the Nextivity CEL-FI GO G41 Building Yagi Pack inc. Ceiling Dome. The Ceiling Dome provides effortlessly improved coverage.

@104

Description::CEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model G41 has a higher output power (+20 dBm) providing the largest coverage area of all GO models.The G41 operates on more frequency bands and can be easily switched between Telstra Optus and Vodafone-TPG (one carrier at a time) should you change service provider.CEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater and by popular request the unit now has an RJ45 Ethernet network interface for remote management.Expanding on G32's dual-band functionality G41 supports carrier aggregation with 40 MHz of relay bandwidth.FEATURES:700L/850/900/1800/2100/2600 MHz (700 band not supported on Vodafone)3G 4G VoLTE NB-IoT (GO4 has 5G capabilities but is currently not enabled or approved)Carrier Switching using WAVE App between Telstra Optus or Vodafone - one carrier at a timeUp to 3000 m2 coverage areaTwo bands simultaneous relayTotal System Relay Bandwidth - Up to 40 MHzRemote Monitoring Control and Alert Capabilities via WAVE Portal (for approved installers)Ethernet Port for connection to internet source for live monitoringPACK INCLUDES:Nextivity CEL-FI GO G41-JE - Switchable between Telstra Optus and Vodafone-TPG (one carrier at a time)Wall Mount 698-4000MHz Panel Antenna -150dBc PIMYagi 698-960MHzPTL-240 10m + 15m Coaxial Cable N male to SMA Male1m Ethernet cable240v Power Supply Read more

Specification:Advanced 4G cellular repeater with +20 dBm output expanded band support carrier switchability ideal for inbuilding coverage with remote management.

@106

Description::The Nextivity CEL-FI G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model G41 has a higher output power (+20 dBm) providing the largest coverage area of all GO models.Operates on more frequency bands and can be easily switched between Telstra Optus and Vodafone-TPG (one carrier at a time) should you change service provider. CEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra Optus and Vodafone.The higher output power means more service antennas can be run from the one repeater and by popular request the unit now has an RJ45 Ethernet network interface for remote management. Expanding on G32’s dual-band functionality G41 supports carrier aggregation with 40 MHz of relay bandwidth.FEATURES:700L/850/900/1800/2100/2600 MHz (700 band not supported on Vodafone)3G 4G VoLTE NB-IoT (G41 has 5G capabilities but is currently not enabled or approved)Carrier Switching using WAVE App between Telstra Optus or Vodafone - one carrier at a timeUp to 3000 m2 coverage areaTwo bands simultaneous relayTotal System Relay Bandwidth – Up to 40 MHzRemote Monitoring Control and Alert Capabilities via WAVE Portal (for approved installers)Ethernet Port for connection to internet source for live monitoringPowertec exclusive offer - 1-Year extra FREE WARRANTY (for a total of 3 years)PACK INCLUDES:Nextivity CEL-FI GO G41-JE - Switchable between Telstra Optus and Vodafone-TPG (one carrier at a time)Wall Mount 698-4000MHz Panel Antenna -150dBc PIMYagi 698-960MHzPTL-240 10m + 6m Coaxial Cable N male to SMA Male1m Ethernet cable240v Power Supply Read more

Specification:Advanced 4G cellular repeater with +20 dBm output expanded band support carrier switchability ideal for inbuilding coverage with remote management.

@104

Specification:Enhance your signal with Nextivity CEL-FI GO G41 Dome Pack including LPDA and 2 internal antennas for improved connectivity and better reception. Boost your cell signal now!

@110

Description::CEL-FI GO G41 represents the latest in 4G cellular repeater technology. Building on the success of the G32 model GO4 has a higher output power (+20 dBm) providing the largest coverage area of all GO models.G41 operates on more frequency bands and can be easily switched between Telstra Optus and Vodafone-TPG (one carrier at a time) should you change service providers. Expanding on G32’s dual-band functionality G41 supports carrier aggregation with 40 MHz of relay bandwidth.This pack is ideal where you have reception problems at a site and you want to increase mobile signal both indoors and outdoors using one CEL-FI GO unit. The external antenna is affixed on the rooftop collecting the mobile signal from outside and transferring it to CEL-FI GO. The indoor panel antenna boosts it internally (within the house) whilst the MARS Antenna is cabled to the outdoor area and boosts a targeted signal external to the building. This set-up has been used successfully in cattle-yard farming and residential applications.FEATURES:700L/850/900/1800/2100/2600 MHz (700 bands not supported on Vodafone)3G 4G VoLTE NB-IoT (GO4 has 5G capabilities but is currently not enabled or approved)Carrier Switching using WAVE App between Telstra Optus or Vodafone – one carrier at a timeUp to 3000 m2 coverage areaTwo band simultaneous relayTotal System Relay Bandwidth – Up to 40 MHzRemote Monitoring Control and Alert Capabilities via WAVE Portal (for approved installers)Ethernet Port for connection to internet source for live monitoringPACK INCLUDES:Nextivity CEL-FI GO G41-JE 1/3/5/7/8/28L/40 Stationary Repeater (Switchable between Telstra Optus and Vodafone-TPG) - one carrier at a timeCeiling Dome 698-4000 2/5dBi Antenna -150dBc PIMLPDA 698-4000MHz 12/14dBi2 x 10m PT240 LSHF cable1 x 6m PT240 LSHF cableMARS Panel Antenna 698-2700 4.3-10 FemaleINSTOCK Wireless 700-2700Mhz 2 Way DAS Splitter/Combiner SMA/F RoHS High IsolationCan I have multiple indoor antennas connected to the GO4?Yes you can. There may be rare occasions where a single service antenna (one that provides your phone with signal) is not adequate enough to cover an area. This could be due to the building size structure or the fact you want signal inside and outside. Chat to our team if you would like to know more.Powertec offers a free consultation to anyone who needs help picking an appropriate antenna.Email us at sales@powertec.com.au or call our head office on (07) 55 770 500 to discuss today! Read more

Specification:Advanced 4G cellular repeater with +20 dBm output expanded band support carrier switchability ideal for inbuilding coverage with remote management.

@118

Description::CEL-FI GO G41 represents the latest in 4G cellular repeater technology. Building on the success of the G32 model GO4 has a higher output power (+20 dBm) providing the largest coverage area of all GO models.G41 operates on more frequency bands and can be easily switched between Telstra Optus and Vodafone-TPG (one carrier at a time) should you change service providers. Expanding on G32’s dual-band functionality G41 supports carrier aggregation with 40 MHz of relay bandwidth.This pack is ideal where you have reception problems at a site and you want to increase mobile signal both indoors and outdoors using one CEL-FI unit. The external antenna is affixed on the rooftop collecting the mobile signal from outside and transferring it to CEL-FI. The indoor panel antenna boosts it internally (within the house) whilst the MARS Antenna is cabled to the outdoor area and boosts a targeted signal external to the building. This set-up has been used successfully in cattle-yard farming and residential applications.FEATURES:700L/850/900/1800/2100/2600 MHz (700 bands not supported on Vodafone)3G 4G VoLTE NB-IoT (GO4 has 5G capabilities but is currently not enabled or approved)Carrier Switching using WAVE App between Telstra Optus or Vodafone – one carrier at a timeUp to 3000 m2 coverage areaTwo band simultaneous relayTotal System Relay Bandwidth – Up to 40 MHzRemote Monitoring Control and Alert Capabilities via WAVE Portal (for approved installers)Ethernet Port for connection to internet source for live monitoringPACK INCLUDES:Nextivity CEL-FI GO G41-JE 1/3/5/7/8/28L/40 Stationary Repeater (Switchable between Telstra Optus and Vodafone-TPG) - one carrier at a timeWall Mount 698-4000MHz 5/7dBi Panel Antenna -150dBc PIMLPDA 698-4000MHz 12/14dBi2 x 10m PT240 LSHF cable1 x 6m PT240 LSHF cableMARS Panel Antenna 698-2700 4.3-10 FemaleINSTOCK Wireless 700-2700Mhz 2 Way DAS Splitter/Combiner SMA/F RoHS High IsolationCan I have multiple indoor antennas connected to the G41?Yes you can. There may be rare occasions where a single service antenna (one that provides your phone with signal) is not adequate enough to cover an area. This could be due to the building size structure or the fact you want signal inside and outside. Chat to our team if you would like to know more.Powertec offers a free consultation to anyone who needs help picking an appropriate antenna.Email us at sales@powertec.com.au or call our head office on (07) 55 770 500 to discuss today! Read more

Specification:CEL-FI GO G41 boosts 4G signal with +20 dBm output power covers large areas supports carrier aggregation and works with Telstra Optus and Vodafone-TPG.

@118

Description::Upgrade your cellular coverage with the CEL-FI GO G41-JE the latest in 4G repeater technology. Boasting higher output power for an expansive coverage area it supports Telstra Optus and Vodafone-TPG. With added features like carrier switching and remote management it's ideal for in-building applications.CEL-FI GO G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model G41 has a higher output power (+20 dBm) providing the largest coverage area of all GO models.The G41 operates on more frequency bands and can be easily switched between Telstra Optus and Vodafone-TPG (one carrier at a time) should you change service providers.CEL-FI G41 is ideal for inbuilding cellular coverage applications for Telstra Optus and Vodafone. The higher output power means more service antennas can be run from the one repeater and by popular request the unit now has an RJ45 Ethernet network interface for remote management.Expanding on G32’s dual-band functionality G41 supports carrier aggregation with 40 MHz of relay bandwidth.FEATURES:700L/850/900/1800/2100/2600 MHz (700 bands not supported on Vodafone)3G 4G VoLTE NB-IoT (GO4 has 5G capabilities but is currently not enabled or approved)Carrier Switching using WAVE App between Telstra Optus or Vodafone - one carrier at a timeUp to 3000 m2 coverage areaTwo bands simultaneous relayTotal System Relay Bandwidth – Up to 40 MHzRemote Monitoring Control and Alert Capabilities via WAVE Portal (for approved installers)Ethernet Port for connection to internet source for live monitoringPowertec exclusive offer - 1-Year extra FREE WARRANTY (for a total of 3 years)PACK INCLUDES:2 x Universal Ceiling-Wall Antenna 698-4000MHzLPDA 698-4000MHz3 x PTL-240 10m Coaxial Cable N male to SMA Male1m Ethernet cable240v Power SupplySupports 5G DSS on Telstra Optus and VodafoneThis is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency.The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon.May not be available in all areas on all bands. Read more

Specification:Advanced 4G cellular repeater with +20 dBm output expanded band support carrier switchability ideal for inbuilding coverage with remote management.

@106

Description::Enhance Mobile Coverage with a Powerful Signal Booster Designed to Improve ConnectivityThe Cel-Fi G41-JE is an advanced mobile signal booster designed to enhance connectivity in areas with weak signal. Ideal for residential commercial and enterprise environments it ensures superior voice text and data performance. The device uses cutting-edge technology to deliver fast stable and uninterrupted mobile service amplifying signals from nearby towers to improve coverage in both rural and urban locations even in areas with building interference.Key FeatureCompatible with 3G 4G VoLTE NB-IoT and 5G NSACarrier switching via the WAVE App between Telstra Optus or Vodafone (one carrier at a time)Coverage area: Up to 3 000 m²Two bands simultaneous relayTotal system relay bandwidth: Up to 40 MHzRemote monitoring control and alert capabilities via WAVE Portal (for approved installers)Ethernet port for internet connection and live monitoringPack IncludesNextivity Cel-Fi GO G41 JEPowertec 4G Omni High Gain Antenna 698 to 2700Mhz N Female PTL-240 Coaxial Cable N Male to SMA Male 10m2x Powertec 4G-5G Universal Ceiling-Wall Antenna 700 to 4000Mhz N FemaleL-195 Patch Cable N Male to SMA Male 1m2x PTL-240 Coaxial Cable N Male to N Male 10mPowertec RF Power divider 2-way 698-3800Mhz SMA Female Wilkinson 20dB isolationWall plate for Cel-Fi building packsPowertec Wideband 4G-5G Hinged Antenna 700 to 3800Mhz SMA MaleNote: While the Cel-Fi WAVE App does not directly display 5G boosting 5G signal improvements will be visible next to the signal bars. Read more

Specification:Enhance cellular signal with Nextivity CEL-FI GO G41 Universal Ceiling-Wall Pack featuring Omni High Gain and 2 internal antennas for improved reception. Enhance connectivity today.

@105

Description::Enhance Mobile Coverage with a Powerful Signal Booster Designed to Improve ConnectivityThe Cel-Fi G41-JE is an advanced mobile signal booster designed to enhance connectivity in areas with weak signal. Ideal for residential commercial and enterprise environments it ensures superior voice text and data performance. The device uses cutting-edge technology to deliver fast stable and uninterrupted mobile service amplifying signals from nearby towers to improve coverage in both rural and urban locations even in areas with building interference.Key FeatureCompatible with 3G 4G VoLTE NB-IoT and 5G NSACarrier switching via the WAVE App between Telstra Optus or Vodafone (one carrier at a time)Coverage area: Up to 3 000 m²Two bands simultaneous relayTotal system relay bandwidth: Up to 40 MHzRemote monitoring control and alert capabilities via WAVE Portal (for approved installers)Ethernet port for internet connection and live monitoringPack IncludesNextivity Cel-Fi GO G41 JEPowertec 4G-5G LPDA Antenna 698 to 4000Mhz N Female +10m Cable N Male to SMA Male2x Powertec 4G-5G Indoor Wall Mount Panel Antenna 700 to 4000Mhz N FemaleL-195 Patch Cable N Male to SMA Male 1m2x PTL-240 Coaxial Cable N Male to N Male 10mPowertec RF Power divider 2-way 698-3800Mhz SMA Female Wilkinson 20dB isolationWall plate for Cel-Fi building packsPowertec Wideband 4G-5G Hinged Antenna 700 to 3800Mhz SMA MaleNote: While the Cel-Fi WAVE App does not directly display 5G boosting 5G signal improvements will be visible next to the signal bars. Read more

Specification:Enhance cell signal with Nextivity CEL-FI GO G41 Wall Panel Pack. Includes LPDA and 2 internal antennas for strong coverage. Boost reception effortlessly.

@106

Description::Enhance Mobile Coverage with a Powerful Signal Booster Designed to Improve ConnectivityThe Cel-Fi G41-JE is an advanced mobile signal booster designed to enhance connectivity in areas with weak signal. Ideal for residential commercial and enterprise environments it ensures superior voice text and data performance. The device uses cutting-edge technology to deliver fast stable and uninterrupted mobile service amplifying signals from nearby towers to improve coverage in both rural and urban locations even in areas with building interference.Key FeatureCompatible with 3G 4G VoLTE NB-IoT and 5G NSACarrier switching via the WAVE App between Telstra Optus or Vodafone (one carrier at a time)Coverage area: Up to 3 000 m²Two bands simultaneous relayTotal system relay bandwidth: Up to 40 MHzRemote monitoring control and alert capabilities via WAVE Portal (for approved installers)Ethernet port for internet connection and live monitoringPack IncludesNextivity Cel-Fi GO G41 JEPowertec 4g Low Band Yagi Antenna 698 to 960Mhz N Female + 10m Cable N Male to SMA Male2x Powertec 4G-5G Indoor Wall Mount Panel Antenna 700 to 4000Mhz N FemaleL-195 Patch Cable N Male to SMA Male 1m2x PTL-240 Coaxial Cable N Male to N Male 10mPowertec RF Power divider 2-way 698-3800Mhz SMA Female Wilkinson 20dB isolationWall plate for Cel-Fi building packsPowertec Wideband 4G-5G Hinged Antenna 700 to 3800Mhz SMA MaleNote: While the Cel-Fi WAVE App does not directly display 5G boosting 5G signal improvements will be visible next to the signal bars. Read more

Specification:Enhance your cellular signal with Nextivity CEL-FI GO G41 Wall Panel Pack. Includes Yagi antenna and 2 internal antennas for improved connectivity indoors. Boost your signal now!

@109

Description::Enhance Mobile Coverage with a Powerful Signal Booster Designed to Improve ConnectivityThe Cel-Fi G41-JE is an advanced mobile signal booster designed to enhance connectivity in areas with weak signal. Ideal for residential commercial and enterprise environments it ensures superior voice text and data performance. The device uses cutting-edge technology to deliver fast stable and uninterrupted mobile service amplifying signals from nearby towers to improve coverage in both rural and urban locations even in areas with building interference.Key FeatureCompatible with 3G 4G VoLTE NB-IoT and 5G NSACarrier switching via the WAVE App between Telstra Optus or Vodafone (one carrier at a time)Coverage area: Up to 3 000 m²Two bands simultaneous relayTotal system relay bandwidth: Up to 40 MHzRemote monitoring control and alert capabilities via WAVE Portal (for approved installers)Ethernet port for internet connection and live monitoringPack IncludesNextivity Cel-Fi GO G41 JEL-195 Patch Cable N Male to SMA Male 1mPTL-240 Coaxial Cable N Male to N Male 10mMARS 4G Panel Antenna 5dBi 698 to 2700Mhz 4.3-10 FemalePowertec 4G-5G Indoor Wall Mount Panel Antenna 698 to 4000Mhz N FemalePowertec 4G Low band Yagi Antenna 698 to 960Mhz N Female + 10m cable N Male to SMA MalePTL-240 Coaxial Cable N Male to N Male 6mPowertec RF Power divider 2-way 698-3800Mhz SMA Female Wilkinson 20dB isolationWall plate for Cel-Fi building packsPowertec Wideband 4G-5G Hinged Antenna 700 to 3800Mhz SMA MaleNote: While the Cel-Fi WAVE App does not directly display 5G boosting 5G signal improvements will be visible next to the signal bars. Read more

Specification:Enhance indoor and outdoor cellular signal with Nextivity CEL-FI GO G41 Yagi Building Pack complete with wall mount for improved connectivity solution.

@100

Description::Enhance Your In-Building Cellular Coverage with the Nextivity CEL-FI G41-JE – High Output Power and Multi-Carrier SupportThe Nextivity CEL-FI G41-JE represents the latest in 4G cellular repeater technology. Building on the success of the G32 model the G41 features higher output power (+20 dBm) providing the largest coverage area of all GO models. It operates on multiple frequency bands and can be easily switched between Telstra Optus and Vodafone-TPG (one carrier at a time) making it ideal for in-building cellular coverage applications.The increased output power allows for more service antennas to be run from a single repeater and the newly added RJ45 Ethernet network interface enables remote management. Expanding on the G32’s dual-band functionality the G41 supports carrier aggregation with 40 MHz of relay bandwidth for enhanced performance.Key FeaturesFrequency Bands: 700L/850/900/1800/2100/2600 MHz (700 band not supported on Vodafone).Network Compatibility: Supports 3G 4G VoLTE NB-IoT with future 5G capabilities (currently not enabled or approved).Carrier Switching: Easily switch between Telstra Optus or Vodafone using the WAVE App (one carrier at a time).Coverage Area: Provides up to 3000 m² of coverage.Simultaneous Relay: Supports two bands with a total system relay bandwidth of up to 40 MHz.Remote Monitoring: Includes remote monitoring control and alert capabilities via the WAVE Portal (for approved installers).Ethernet Port: Connects to an internet source for live monitoring and remote management.Extended Warranty: Powertec exclusive offer – 1-year extra free warranty for a total of 3 years.Includes:CEL-FI G41-JE (Switchable between Telstra Optus and Vodafone-TPG) - one carrier at a time.240v Power Supply Read more

Specification:Boost in-building cellular coverage with high output power multi-band support and up to 3000 m² coverage ideal for Telstra Optus and Vodafone.

@105

Description::Powerful indoor signal boosting solution for reliable mobile connectivity everywhereThis advanced indoor cellular repeater is designed to significantly improve 4G voice and data performance in homes apartments and commercial spaces where coverage is weak or inconsistent. Delivering high output power of up to +20 dBm it provides strong and stable signal distribution across indoor environments making it ideal for both permanent and temporary installations. With flexible carrier switching via a mobile app and built-in Ethernet connectivity for remote monitoring it ensures consistent performance easy management and adaptable operation as network requirements change.Key FeaturesHigh Output Power Performance: Delivers up to +20 dBm output power providing enhanced coverage and stronger indoor signal levels across multiple rooms or levels.Multi-Carrier Switching Capability: Allows easy switching between supported carriers using a mobile app enabling flexibility if your service provider changes.Remote Monitoring via Ethernet: Integrated RJ45 Ethernet port enables remote access and management through a dedicated monitoring platform for performance optimisation.Improved Voice and Data Reliability: Enhances call quality reduces dropped calls and improves mobile data speeds in low-signal environments.Simple Setup and Operation: Designed for straightforward installation and configuration making it suitable for both residential and light commercial use.Flexible Application Use: Ideal for small homes apartments retail stores rental properties holiday accommodations high-rise offices and heritage buildings where signal penetration is limited.Easy 5 minutes setup1) Find a window in the building offering the best coverage2) Attach the adhesive antenna holder to the window and insert the donor antenna3) Connect donor and service antennas to the G41 and power up4) Move the service antenna at least 4m away from the donor antenna at the window5) Find the optimal position for the service antenna then put on a shelf mount to a wall or on the ceilingKit Includes1 x GO G41 JE2 x ANT-PT-00009 - Powertec 4G-5G Universal Ceiling-Wall Antenna 698 to 4000 MHz N Female1 x ACC-PT-00506 - Window Mount for Universal Ceiling-Wall Antenna with adhesive backing strips1 x ACC-PT-00115 - L-195 Patch Cable N Male to SMA Male 75 cm1 x ACC-PT-00171 - PTL-240 Coaxial Cable N Male to SMA Male 6mBuilt to deliver reliable indoor connectivity with flexible control and strong performance this solution ensures consistent mobile coverage wherever it is needed most. Read more

Specification:Introducing the GO G41 Self Install Kit for those that don’t want to install a donor antenna on the outside of their building. This kit is very simple to install and could be described as plug and play.

@113

Description::Ideal for boosting mobile signal in homes apartments retail stores or for tempory coverage applications. The Nextivity CEL-FI G41-NE 4G cellular repeater offers a high output power (+20 dBm) for maximum coverage and features an RJ45 Ethernet port for remote monitoring via the WAVE Portal.APPLICATIONSSmall HomesApartmentsRetail storesRentersHoliday RentalsHigh Rise Office BuildingsHistoric BuildingsEASY 5 MIN SETUP1) Find a window in the building offering the best coverage2) Attach the adhesive antenna holder to the window and insert the donor antenna3) Connect donor and service antennas to the G41 and power up4) Move the service antenna at least 4m away from the donor antenna at the window5) Find the optimal position for the service antenna then put on a shelf mount to a wall or on the ceilingINCLUDES1 x GO G41 NE2 x ANT-PT-00009 - Powertec 4G-5G Universal Ceiling-Wall Antenna 698 to 4000 MHz N Female1 x ACC-PT-00506 - Window Mount for Universal Ceiling-Wall Antenna with adhesive backing strips1 x ACC-PT-00115 - L-195 Patch Cable N Male to SMA Male 75 cm1 x ACC-PT-00171 - PTL-240 Coaxial Cable N Male to SMA Male 6m Read more

@113

Description::PRODUCT DETAILS:Please be advised that this product requires a Donor (External) and Service (Internal) Antenna to operate.CEL-FI GO G41 represents the latest in 4G cellular repeater technology. Building on the success of the G32 model G41 has a higher output power (+20 dBm) providing the largest coverage area of all GO models.The G41-NE has been optimized for use on the Vodafone network supporting 700Mhz (high portion of the band). The higher output power means more service antennas can be run from the one repeater and by popular request the unit now has an RJ45 Ethernet network interface for remote management.Expanding on G32’s dual-band functionality G41 supports carrier aggregation with 40 MHz of relay bandwidth.FEATURES:Optimised and locked to the Vodafone TPG network3G: 2100MHz 4G: 700H/ 850/ 1800/ 2100MHz3G 4G VoLTE NB-IoT (GO4 has 5G capabilities but is currently not enabled or approved)Up to 3000 m2 coverage areaTwo bands simultaneously relayTotal System Relay Bandwidth – Up to 40 MHzRemote Monitoring Control and Alert Capabilities via WAVE Portal (for approved installers)Ethernet Port for connection to internet source for live monitoring Read more

Specification:Enhance your cellular coverage with CEL-FI GO G41-NE optimized for Vodafone’s network. Perfect for large homes offices and commercial buildings.

@105

Description::This powerful booster delivers industry-leading signal gain of up to 100 dB overcoming mid-band 5G NR coverage challenges. With compact user-friendly design and no manual configuration required G51 is perfect for small to medium-sized buildings. It's Australian operator approved ensuring better voice quality 5G data speeds and fewer dropped calls. The G51 supports various 3G/4G and 5G cellular networks.  Experience unmatched 5G connectivity with Nextivity GO G51 Stationary Repeater! Boost both 4G and 5G signals indoors with up to 100 dB signal gain. Say goodbye to dropped calls and slow data speeds. This compact user-friendly repeater covers up to 3000 m2 and supports carrier switching. Perfect for small- to medium-sized buildings it's Australian operator approved and ensures better voice quality and 5G speeds. No manual configuration required. Invest in reliable 5G coverage today!Features:Relays two channels simultaneously:1st Relay Channel: 5G 3500 (100MHz)2nd Relay Channel: one 3G or 4G band (5/10/15/20MHz)Carrier Switching via WAVE App between Telstra or Optus - one carrier at a time (Vodafone approval pending)Up to 3000 m2 coverage areaVoice and Data support on 4G/5GSuited for those in a 5G 3500 coverage area (G41 is more suitable for areas outside of a 5G 3500 coverage area as it supports 2 x 4G band relay)Powered by the latest 4th generation Nextivity proprietary IntelliBoost chip delivering industry-leading and unconditionally network safe performanceEstablishes network safe uplink power in real-time and automatic uplink muting when no active user equipment is detectedEthernet Port for remote monitoring and management with Nextivity WAVE Portal and WAVE AppIdeal for Boosting Mobile Signal in:Large HomesSingle or Multi-Level Commercial BuildingsGovernment BuildingsMedical and Nursing HomesInfill 5G coverage for Hotels/Shopping Centres/Hospitals/Conference CentresUnderground ParkingFactories and ManufacturingWarehouses and LogisticsPACK INCLUDES:Nextivity CEL-FI GO G51 Stationary Repeater - Switchable between Telstra Optus and Vodafone (Pending approval) - (one carrier at a time)Ceiling Dome 698-4000MHz Antenna -150dBc PIMLPDA Antenna 698-4000MHzPTL-240 10m + 6m Coaxial Cable N male to SMA Male1m Ethernet cable240v Power Supply Read more

Specification:Introducing Nextivity's CEL-FI GO G51 the first repeater with 5G N78 support designed to enhance cellular coverage in large residential and medium-sized commercial spaces.

@115

Description::The Nextivity CEL-FI GO G51 is a powerful 4G/5G signal booster designed to improve cellular coverage in large residential and medium-sized commercial spaces. Suited to urban areas where a 5G 3500 signal is available to take advantage of 5G data speeds and increased user capacity.The G51 also supports 4G LTE data speeds so you can enjoy fast internet connectivity even in areas with weak signals. Plus with its easy-to-install design and compact size the G51 is a convenient solution that won’t take up much space in your home or office.If you’re tired of dropped calls slow data speeds and unreliable cellular coverage the Nextivity G51 is a great investment. With its advanced signal-boosting technology and broad carrier compatibility it’s sure to improve your cellular experience and keep you connected when you need it most.FEATURES:Relays two channels simultaneously:1st Relay Channel: 5G 3500 (100MHz)2nd Relay Channel: one 3G or 4G band (5/10/15/20MHz)Carrier Switching using WAVE App between Telstra or Optus – one carrier at a time (Vodafone approval pending)Up to 3000 m2 coverage areaVoice and Data support on 4G/5GSuited for those in a 5G 3500 coverage area (G41 is more suitable for areas outside of a 5G 3500 coverage area as it supports 2 x 4G band relay)Powered by the latest 4th generation Nextivity proprietary IntelliBoost chip delivering industry-leading and unconditionally network safe performanceEstablishes network-safe uplink power in real-time and automatic uplink muting when no active user equipment is detectedEthernet Port for remote monitoring and management with Nextivity WAVE Portal and WAVE AppIdeal for Boosting Mobile Signal in:Large HomesSingle or Multi-Level Commercial BuildingsGovernment BuildingsMedical and Nursing HomesInfill 5G coverage for Hotels/Shopping Centres/Hospitals/Conference CentresUnderground ParkingFactories and ManufacturingWarehouses and LogisticsPACK INCLUDES:Nextivity CEL-FI GO G51 Stationary Repeater - Switchable between Telstra Optus and Vodafone (Pending approval) - (one carrier at a time)Wall Mount 698-4000MHz Panel Antenna -150dBc PIMLPDA Antenna 698-4000MHzPTL-240 10m + 6m Coaxial Cable N male to SMA Male1m Ethernet cable240v Power Supply Read more

Specification:Boost 4G/5G signal with the Nextivity CEL-FI GO G51 ideal for enhancing coverage in large homes and medium businesses. Enjoy faster reliable connectivity.

@115

Description::The Nextivity CEL-FI GO G51 Stationary Repeater (G51–LE–003) is a high-performance cellular coverage solution designed to bring the power of the 5G network indoors. With dual-band support and industry-leading signal gain of up to 100 dB it ensures superior coverage for 2G 3G 4G and 5G networks in small to medium-sized buildings.Key Features:Supports 2G 3G 4G and 5G networks with automatic selectionn78 1 3 5 7 8 20 and 28L frequency bandsUp to 100 dB signal gain27 dBm downlink power (Band n78)22 dBm uplink powerSelf-configuring with remote management Compact designPassive convectionIP20-ratedOptimised for 5G NR Mid-BandThis repeater provides extensive 5G NR coverage in the mid-band (3.5 GHz) ideal for overcoming the range limitations of 5G in urban environments. It supports dual-band relay for 2G/3G/4G and 5G offering reliable connectivity across multiple networks including GSM WCDMA LTE and NR protocols.Seamless Network IntegrationPowered by Nextivity's latest IntelliBoost chip the GO G51 integrates with existing cellular networks without requiring manual configuration. It supports both FDD and TDD duplex modes ensuring compatibility with a wide range of carriers and enhancing coverage with automatic network selection for the best available signal.Remote Monitoring and ManagementWith the Nextivity WAVE Portal and WAVE App users can easily monitor and manage the performance of the GO G51 remotely. This provides real-time insights and management options to ensure optimal system performance reducing maintenance and setup time.Flexible Power and Connectivity OptionsThe GO G51 is equipped with multiple connectivity interfaces including SMA connectors for donor and server ports LAN for remote management and Bluetooth for easy setup via the WAVE App. The system is powered by a 60W AC adapter with flexible cable options for various regions.Durable and Environmentally SafeDesigned for indoor use the GO G51 features a rugged build with an IP20 rating providing protection from environmental factors such as dust and humidity. The repeater operates efficiently in temperatures ranging from 0 °C to 40 °C with passive convection cooling to maintain optimal performance.Compliance and CertificationsThe CEL-FI GO G51 is compliant with 3GPP standards (Release 13 and 17) CE RED ErP and RoHS3 certifications ensuring safety and quality across global markets. It also meets ACMA and OFCOM standards making it an ideal solution for enterprise use in EMEA and APAC regions. Read more

Specification:The CEL-FI GO G51 Repeater boosts 5G connectivity indoors ensuring superior signal strength for 2G 3G 4G and 5G networks in medium spaces.

@105