3-AXIS STABILIZED HANDHELD GIMBAL SYSTEM
Developed for the filmmaking professional, the DJI Ronin marks a generational leap in camera stabilization technology. Its custom sensors, powerful motors and advanced algorithms put world-class precision in your hands.

SAVE TIME ON SET
Once your camera is configured, the Ronin can be ready to shoot in as little as 5 minutes, saving time and increasing efficiency on set. The built-in ATS (Auto Tune Stability) technology intelligently tunes Ronin to your camera rig at the touch of a button.

SMOOTHTRACK CONTROL
Transform tilt and pan movements on the Ronin into smooth and stabilized camera angle chanes.

3 OPERATION MODES
3 differnet modes of operation allow the Ronin to be used in different scenarios, all of which can be entered without changing settings on the Ronin Assistant app or a 2nd operator remote. SmoothTrack fun ctionality remains in all three modes.

1 UPRIGHT MODE

Flip the gimbal over to bring the camera closer to eye level for a higher perspective without straining to fit it. Use this mode when sticking the Ronin out of a car's sunroof or when trying to shoot over a crowd of people.

2 UNDERSLUNG MODE

The default gimbal operation is the Underslung mode. The camera can be comfortably held low to the ground, at chest level or anywhere in between. This is also used when the Ronin is suspended from a camera jib or crane.

3 BRIEFCASE MODE

When a slimmer gimbal profile is needed, i.e when moving through doorways or narrow paths, briefcase mode is deal, it allows the gimbal to be held to the side close to the legs, much like a briefcase.

EXTREMELY DURABLE, HIGH BUILD QUALITY
Made from precision machined aircraft-grade aluminum, the Ronin offers the durability to withstand rugged use on set and meet the high demand for reliability. No loose cables or zip ties give it a clean, professional appearance.

MOBILE BLUETOOTH ASSISTANT SOFTWARE
The feature-rich iOS and Android DJI Assistant software allows easy setup of all system configurations. The PC and Mac Assistant also provides control of all the Ronin's functionalities in addition to firmware upgrades for future features.

SIMPLE 5-MINUTE SETUP
With a little practice, the Ronin takes less than 5 minutes to set up and balance whenever the camera configuration is changed. This saves time, making the Ronin more efficient in professional envirnments where every second counts. The built-in ATS (Auto Tune Stability) technology intelligently tunes the Ronin to your camera a rig at the touch of a button.

SUPPORTS A MULTITUDE OF CAMERAS AND LENSES
The Ronin is not customized for any specific camera, it can be easily adjusted to carry everything from small & light M4/3 cameras to heavier systems like the Red Epic.

BASED ON ZENMUSE TECHNOLOGY
The DJI Zenmuse gimbals were the first commercially available system in the world to utilize brushless motor technology for professional filming and aerial photography. The Zenmuse gimbal line has long been a benchmark that others have been measured against. The Ronin is based off the same technology and also offers multiple control modes, a built-in IMU, and customized direct drive brushless motors.

2ND OPERATOR CONTROLLER
An included 2nd operator transmitter allows a 2nd operator to pan, tilt, and roll independent of the Ronin's movement. SmoothTrack speeds and operation modes can be assigned with 2 custom toggle switches on the transmitter.

HIGH PERFORMANCE PROCESSING POWER
A customized, advanced 32-bit floating point DSP processor offers more efficiency than an ARM processor, for faster processing of signals from the onboard encoders.

HIGH TORQUE, PRECISION CONTROLLED MOTORS
Motors have been developed with the high performance Ronin in mind. Using FOC control, you can count on high precision, low vibration, and increased torque. Digital Absolute Positioning Encoders in each axis provide the highest levels of accuracy. This combination of custom motor modules and features is found in no other system.

BUILT-IN RECEIVER & REMOTE CONTROL
A built-in DJI receiver allows the Ronin to be remotely controlled by a 2nd operator. The gimbal operator can focus on gimbal movement while the 2nd operator pays attention to camera movement. 2nd operator mode is also useful for gimbal control when working with flying platforms for aerial cinematography. A D-Bus port is also included if a non-DJI receiver is required.

QUICK RELEASE TOP HANDLE BAR
The top bar features a quick release system allowing easy attachment and detachment for repaid setup and break down. The same attachment can be used for vehicle or multi-rotor mounting.

QUICK SWAP INTELLIGENT BATTERY
The Ronin's customized intelligent battery is easy to install and simple to charge with the provided charger. Remaining power can be checked directly on the battery. Overcharge and over depletion protection is built-in, as is individual battery cell charge balancing. Expected run time is approximately 6 hours, depending on the camera rig and gimbal usage.

POWER DISTRIBUTION BOX
Two regulated 12V P-taps, one 500mAH full size USB connector, and also a connection point for the DJI Light bridge Long Range HD Video Downlink are provided. This offers convenient power connection for various accessories including follow focus system, HD video downlinks and others, all while keeping the wiring to a minimum.

DUAL 15MM RODS FOR FOLLOW-FOCUS ACCESSORIES
Follow focus systems and matte boxed can be easily mounted on the Ronin using industry standard dual 15mm segmented rods. The segmented rods allow for customization of different lengths, dependent on camera and lens setup.

PROTECTIVE CARRYING CASE
An extremely strong, durable and water tight carrying case with rolling wheels provides easy transportation. Dense custom cut EPP foam protects the Ronin and accessories.

AUTO CONFIGURATION
After balancing a camera rig, simply tap the Auto Tune Stability button to tune the Ronin for use. It will intelligently adjust parameters based on your camera rig's weight and independently adjust each individual axis until an optimal setting is found. Auto Tune Stability also fine-tunes other aspects of control system, making balancing fast and easy.

SMOOTHTRACK TUNING
Tune each individual speed to your preference. SmoothTrack provides movement translation based off the Roin operator's movement. As the Ronin operator pans or tilts the gimal, the camera orientation will pan and tilt in the direction the gimbal is moved and then ramp down in speed. This pan and tilt movement speed can be independently adjusted using software. Translated movement acceleration can also be fine tuned as well. If the Ronin operator needs to pan or tilt rapidly between two positions and the standard speed isn't sufficient, an accelerated speed can be adjusted without affecting slower movements.

REMOTE OPERATOR CONTROL
Full configuration of the transmitter can be accomplished through the DJI Assistant. Features such as control speed, remapping of what the control joysticks do, and also end-point adjustments can be configured through Assistant.

RONIN STATS
The Ronin's vital stats can also be viewed on the Assistant app. Key items such as motor power, pan-tilt-roll axis's degrees of movement, electronics' temperature monitoring, as well as remaining battery life.

FIRMWARE UPGRADABLE
All unis shipped will have the latest firmware, but due to our continuous drive to innovate, firmware updates will be made available online for improved performance and future features.

PRECISE FOCUS CONTROL
Use the Ronin with the DJI Focus for wireless control of focus or aperture from anywhere on a set.

SPECS
GENERAL
Built-in Functions

• Three Operation Modes
  · Underslung Mode
  · Upright Mode
  · Briefcase Mode
• Built-in independent IMU module
• DJI Specialized Gimbal Drive Motors with Encoders
• Bluetooth Module
• USB Connection
• 2.4GHz Receiver
• Temperature Sensor
• DJI Advanced 32-Bit DSP Processor
• D-Bus Supported

MECHANICAL & ELECTRICAL CHARACTERISTICS
Working Current

• Static current: 300mA (@16V)
• Dynamic current: 600mA (@16V)
• Locked motor current: Max 10A (@16V)

Operating Temperature

• -15°C ~ 50°C (5°F ~ 120°F)

Weight

• 4.20kg (9.26lbs) fully loaded with handlebar

Gimbal Dimensions

• 620mm(W) x 280-380mm (D)x 500mm(H)

Supported Camera Dimensions

• Maximum depth at center of mass on camera base plate: 140mm
• Maximum height measured from top of camera base plate: 225mm
• Maximum width: 195mm

PERIPHERAL
Accessory Power Connections

• 12V regulated P-Tap x 2, USB 500mW x 1, DJI Lightbridge x 1

GCU Input Power

• 4S Ronin Battery

Connections

• 2.4GHz Remote Control, Bluetooth, USB

PC Assistant Software Requirements

• Windows XP SP3; Windows 7; Windows 8 (32 or 64 bit)

Mobile Assistant Software Requirements

• iOS version 6.1 or above Mobile Device iPhone 4s, iPhone 5, iPhone 5s, iPod touch 5 , iPad 3, iPad 4, iPad mini

WORKING PERFORMANCE
Load Weight (Reference Value)

• 7.25kg (16lbs)

Angular Vibration Range

• ± 0.02°

Maximum Controlled Rotation Speed

• Pan axis: 90°/sec
• Tilt axis: 100°/sec
• Roll axis: 30° /sec

Controlled Rotation Range

• Pan axis control: 360°
• Tilt axis control: Up 45° to Down 120°
• Roll axis control: ± 25°