The Fibaro Dimmer Bypass 2(FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps which use at least 5W.
Easy to use and install
Supports low power lamps such as LEDs or energy saving compact fluorescent lamps
Product Details
The Fibaro Dimmer Bypass 2 is designed to supportFibaro Z-Wave In-Wall Dimmer 2by enabling it to control and dim lights which draw minimum 5W (e.g LED lighting).
It can be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of 2-wire connection, Fibaro Dimmer Bypass 2 allows reducing minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cosφ>0.5)
Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2.
This product must be installed by a qualified electrician. Before engaging an electrician, check that they provide a warranty and electrical compliance certificate. For warranty claim, you have to provide an installation compliance certificate from your electrician.
The Fibaro Dimmer Bypass 2(FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps that use at least 5W.
Easy to use and install
Supports low-power lamps such as LEDs or energy-saving compact fluorescent lamps.
Product Details
The Fibaro Dimmer Bypass 2 is designed to support Fibaro Z-Wave In-Wall Dimmer 2 by enabling it to control and dim lights which draw minimum 5W (e.g LED lighting).
It can be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of 2-wire connection Fibaro Dimmer Bypass 2 allows to reduce minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cosφ>0.5)
Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2.
This product must be installed by a qualified electrician. Before engaging an electrician check that they provide a warranty and electrical compliance certificate. For warranty claim you have to provide an installation compliance certificate from your electrician.
The FIBARO Z-Wave D/W Sensor 2 is a small battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors windows and garage doors.
The FIBARO Z-Wave D/W Sensor can be used to automatically turn on lights turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network’s climate control capablities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
Note: This device is currently only compatible (out of the box) with Fibaro Home Center 2 and Fibaro Home Center Lite controllers.
To enable this device to work with Vera controllers you need to do the following: Under the devices Advance>Params you need to change the following details: device_type – urn:schemas-micasaverde-com:device:DoorSensor:1 device_file – D_DoorSensor1.xml device_json – D_DoorSensor1.json
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system but once it has it should appear as a D/W sensor in the Vera UI.
The FIBARO Z-Wave D/W Sensor 2 is a small battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
The Brown3 D/W sensor is the device on the far right in this products thumbnail.
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network’s climate control capablities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
Note: This device is currently only compatible (out of the box) with Fibaro Home Center 3 and Fibaro Home Center Lite controllers.
To enable this device to work with Vera controllers you need to do the following: Under the devices Advance>Params you need to change the following details: device_type – urn:schemas-micasaverde-com:device:DoorSensor:1 device_file – D_DoorSensor1.xml device_json – D_DoorSensor1.json
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system but once it has it should appear as a D/W sensor in the Vera UI.
The FIBARO Z-Wave D/W Sensor 2 is a small battery powered magnetic door and window sensor with a built in temperature sensor.
Completely wireless
Automatic software updates
Includes a built in temperature sensor
Comes in multiple colours
Tamper and low battery alarm notification
Product Details
The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.
The detector consists of two magnetic units one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors windows and garage doors.
The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.
This sensor includes a built in temperature sensor which further extends your Z-Wave network’s climate control capablities by allowing it to detect the exact temperature in your home.
This product comes in multiple different colours.
Note: This device is currently only compatible (out of the box) with Fibaro Home Center 2 and Fibaro Home Center Lite controllers.
To enable this device to work with Vera controllers you need to do the following: Under the devices Advance>Params you need to change the following details: device_type – urn:schemas-micasaverde-com:device:DoorSensor:1 device_file – D_DoorSensor1.xml device_json – D_DoorSensor1.json
After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system but once it has it should appear as a D/W sensor in the Vera UI.
The new FIBARO Double Smart Module(FGS-224) is a smart Z-Wave wireless module that can control two circuits each with a maximum load of 6A per channel and 9.5A total load per circuit.
Control the ON-OFF function of two independent circuits or appliances remotely or using a wall switch
Can be used as voltage-free relays (dry contacts)
Compatible with all Z-Wave networks
Acts as a repeater expanding your Z-Wave network
Wide range of compatibility with existing light fittings and does NOT require expensive cabling
The latest generation Z-Wave 500 series chip
Z-Wave Plus certification
Very accurate energy measurement +/- 1 % for power above 5W
Supports secure mode (Z-Wave Network Security) encrypted with AES-128
Dry contacts – this is important. It means that the new FGS-224 can be used to control low voltage systems such as garden lights and irrigation or where you want a pure volt-free switch such as alarm panels and garage door controls.
Product Details
TheFIBARO Double Smart Module(FGS-224) is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave-enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
This FIBARO Double Smart Module (FGS-224) requires 3-wire (including neutral) installation and works with an AC (230V) power supply.
The FIBARO Double Smart Module (FGS-224) also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with Australian-certified (921.42 MHz) Z-Wave Controllers – Fibaro Home Center 3/2/Lite
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using the Fibaro’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device.
Please check the maximum load before installing or operating. This installation must be done by a certified electrician in Australia and New Zealand. Before engaging an electrician check that they provide an electrical compliance certificate. For warranty claim you have to provide installation compliance certificate from your electrician.
Home Center 2 is an advanced whole-home management system which uses a web-based, feature rich graphics interface for simple programming. Control of your home is achieved through a wide range of native apps, voice control by Amazon Alexa or Google Assistant, or truly smart automation. The controller manages all FIBARO Z-wave devices as well as most 3rd party Z-wave devices with a wide library of built-in drivers for multimedia, which include smart TV’s, IP cameras, thermostats, security alarm systems, and media players. Home Center 2 also has its own alarm panel which allows you to arm/ disarm sensors individually, and even remotely. For larger homes or for multiple homes in different locations, Home Center 2 uniquely allows you to network several Home Centers (HC2 or HCL) into one system.
The Home Center 2 by Fibaro isn't just an electronic device. It's also a well-designed, innovative and user-friendly interface, featuring functions never seen before.
Your Home by FIBARO
FIBARO Home Center 2 is faster and more secure than most competitive solutions due to its built-in Intel 1.6 Atom processor which processes the software locally, stores your data on the controller itself. No cloud processing or data storage means your system will run even if the internet goes down while owning your data. Home Center 2 also has advanced user rights and management features coupled with independent GPS location allows for creative scenes based on individual family members, anywhere in the world.
The user-friendly interface is extremely easy to set up, navigate and manage on a smartphone or tablet. Additionally, the visual scene builder on the web interface is very intuitive, allowing even inexperienced users to build quick simple scenes. For more advanced scenes, installers can use LUA scripting to completely automate the system.
Data safety first
FIBARO knows what is the most important. The access to your home and your data are protected at the highest level - through the WAF and Anti-DDoS systems, encrypted communication using the TLS protocol and passwords using bcrypt.
Plug & Play
The FIBARO system is simple to install and use. The plug & play devices are ready for use immediately after unpacking and short configuration, the others are non-invasive during installation.
Voice control
The FIBARO is compatible with voice control technologies. Just tell the System what to do, and your wish will be fulfilled in seconds.
Remote access from anywhere
You can check the status of your devices as well as control your house from any place on Earth. As long as you’re connected to the Internet you can always see what’s going on in your house.
A home filled with peace
Among other things, FIBARO makes sure to care for your personal security, as well as instances of fire, flooding, burglary. It also helps the elderly, the children, and persons of limited mobility in their everyday life.
Save energy
FIBARO allows you to monitor the amount of electricity used by home devices. This way you can easily identify which pieces of hardware keep on bumping up your bills. You can also program the system to help you make the most of the savings.
The dreams have come true
Enjoy the convenience of living with the FIBARO. Treat yourself to an easier and more comfortable life with FIBARO. Discover having time for everything. Finally!
Exclusive Aluminium Casing
We have put a huge emphasis on styling and build quality so that Home Center 2 by Fibaro pleases You from the first time You look at it. What You see is what you get - Home Center 2 by Fibaro is made of solid aluminium. You won't find cheap plastic anywhere! Home Center 2 by Fibaro isn't just good-looking, true innovations hide inside.
Extremely Quick and Efficient Hardware Structure
Intel Atom 1,6Ghz Processor
Thanks to its efficiency, Home Center 2 is much, much faster than other Z-Wave gateways currently on the market. The communication within the Z-Wave network has improved dramatically, resulting in immediate response to commands sent by the home automation system user.
4GB MLC Recovery Disc
Significantly improved user safety thanks to Fibaro's proprietary approach to data protection. Each Home Center 2 has its own Recovery disc, holding system backups, unique to each gateway. This completely prevents unauthorised access to the system. Another advantage of this solution is quick and simple system recovery after any failure.
1GB RAM, 2GB SLC Hard Drive,
Large memory + fast processor = quick communication between Fibaro System devices. Hardware architecture used in the Home Center 2 makes Z-Wave based home automation system work much faster than ever before.
Quick and Easy Installation
Plug the power cord into the POWER connection and the network cable into the LAN port
Within 2 minutes of connecting to a power socket, the Home Center 2 is ready to operate. By default, your Home Center 2 waits to get an IP address from Your DHCP server. If unsure, hold RECOVERY button for a while when power on. By doing this Home Center 2 will automatically get the static IP 192.168.81.1 To access the control panel, type the Home Center 2 IP address in your web browser's address bar.
New Possibilities Thanks to Linked Devices
Your Home Cener 2 gives you new possibilities thaks to Linked Devices. The Linked Devices function lets you combine multiple devices into one virtual device with combined functionality - for example, 3 heater thermostats plus temperature and humidity sensors. The primary advantage of this feature is the convenience of being able to control multiple devices at the same time, at the press of one button. The second advantage is a reduction in the number of devices icons in the user interfaces.
Great Comfort Thanks to Device Panels
The Home Center 2 interface gives you easy control over groups of devices responsible for the same function - for example, heating, air conditioning or garden watering. Thanks to the Device Panels, you can easily schedule operations for groups of devices, based on the day of the week or the time of day.
Geo Localization
Your Home Center 2 gives you another unique functionality - Locating your family members. Now You can always know where your children are, without the need to call them every 5 minutes. Your Home Center 2 will get their location for You.
Your Home Center 2 shows Your family member route and current position on a map. TheHome Center 2 connects to mobile phones with the Fibaro Mobile Application installed to check their current position. TheFibaro Mobile Application determines a family members location and informs the Home Center 2 of it.
Advanced Scenes
Home Center 2 offers a new approach to scenes. Now scenes may be conditioned on any, user-defined variable.
Example Scene 1 "Rain"
If raining: - close roof windows, - turn garden sprinklers OFF, - set "it rained" variable to 1.
Example Scene 2 "Turn garden sprinklers on at 6:00 am"
Each day at 6:00 am check if "it rained" (user-defined variable). If not ("it rained" variable = 0) - turn the sprinklers ON.
Example Scene 3 "Reset variable"
If "it rained" and 12 hours passed from that time: - set "it rained" variable value to 0.
This new Fibaro home controller offers impressive hardware and integration options for installers and clients. This excellent Smart Home controller offers next-generation hardware including:
COMMUNICATION TECHNOLOGY: Z-WAVE (700 series)
NETWORK TECHNOLOGY: Wi-Fi 2.4GHz
CPU: Single-Core ARM Cortex A7 900 MHz
RAM MEMORY: 512 MB
FLASH MEMORY: 4 GB eMMC
The Fibaro Home Center 3 Lite is the perfect controller for small Home Automation projects offering an excellent solution for smaller homes or apartments. The system is recommended for Smart Homes with up to 40 Z-Wave devices and 20 scenes. But don’t be mistaken by it’s size the Fibaro HC3 Lite offers an affordable solution without having to compromise on quality. With this new system you’ll be able to automate a variety of solutions including:
Product Details
Security:
The FIBARO System will ensure the safety of you and your loved ones.
Smoke detection
Carbon monoxide detection
Flood detection
Operation as a wireless alarm system
Cooperation with the existing wired alarm system (eg SATEL) and security companies
Emergency door opening
Closing the roller shutters when you are away
Health:
The FIBARO System will help you ensure the right conditions for your health.
Humidity control
Smart heating
Measurement of air quality and quality of PM2.5 and PM10 dust
Detection of hazardous gases
Control of ventilation and recuperation
Notifications in case of dangerous situations
Convenience:
An intelligent home is primarily about increasing comfort and facilitating everyday activities.
Voice control
Remote home control from applications for phones tablets and smart watches
Automatic scenarios – grouping devices schedules and scenes
Control over devices with one button or remote control
Combining all elements of the house into one ecosystem
Sustainability:
FIBARO will ensure that your home has a minimal impact on the surroundings and the environment.
Intelligent heating control leads to a reduction in the demand for heating media
Build awareness through the energy panel and measure current electricity consumption
The use of dimmers thermostats or intelligent heads leads to significant energy savings
Savings:
In the FIBARO system your savings are very important.
The heating system is intelligently controlled through schedules and the presence of the household members
The use of dimmers and LED drivers leads to a reduction in bills
The ability to use scenarios and automation ensures that no devices will be redundantly used.
We have the honor to present you the new dimension of comfort – Home Center Lite, incredibly compact brain of the FIBARO System. Latest creation, designed with your needs in mind. Let it change your life, making it safer and more convenient, and your home intelligent, efficient and comfortable. Little thing – great effect!
Product Details
HC Lite is a tiny device with huge potential. Incredibly quick and effective. Control your home from anywhere in the World using a mobile phone or tablet. Begin creating your own world around delights and convenience provided by innovation.
LUA is a programming (scripting) language and is commonly used in home automation controllers to enable users to create more complex control scenes than supported by the controller's Scene editor. The HC2's scene editor enables you to use a graphical-based editor or a LUA-based editor, whereas the HCL only supports a graphical editor.
We feel this is the most important difference between the two controllers - and one that you need to think carefully about.
LUA Scenes
Almost all automation in the Fibaro System is controlled by 'Scenes'. For instance these can make lights turn on when motion is detected at particular times of the day or make several things happen from one simple button press of a remote control. Most of these scenes can be created in Fibaro controller's excellent 'Graphical Scene Editor'. But some more complex scenes are actually much easier to create using a LUA script, and in some extreme cases could only be created using LUA.
LUA is a very useful feature to have, occasionally, a simple LUA script can solve an issue that would have required a complex graphical scene.
Scene Controllers
Some remote controls that act as 'Scene Controllers' need a LUA-based scene to work correctly in the Fibaro Controllers.
Virtual Devices
Virtual devices are what they sound like - devices in the Fibaro controller that aren't linked to physical devices. Virtual devices are very useful for controlling devices via other networks, such as AV equipment that can be controlled from your Wi-Fi/Ethernet system (HTTP). They are also useful to create a simple button in the Fibaro App that can control a number of scenes - quickly and easily.
Scene and Device Control (LUA) To create Virtual devices that control scenes you need to use LUA, therefore, these types of Virtual Devices cannot be created in Home Center Lite.
Remote Control of 3rd Party Products (HTTP & IP) Virtual Devices can be created that control products via the IP network (Wi-Fi or Ethernet), via HTTP requests. These are fully supported in Home Center Lite as they use a different type of Virtual Device configuration and command protocol (HTTP Strings).
Yubii Home your life gets better The whole house in one device: the possibility to control lights roller shutters gates doors and windows electrical appliances heating and watering systems multimedia as well as to detect water leaks CO gases and fire with a simple command from one single app.
Sustainability and Savings Yubii Home will make sure your smart home has a minimal impact on the environment reducing its carbon footprint. Thanks to intelligent heating and lighting control and electrical load monitoring you can lower your energy consumption and reduce your heating bills.
Imagine endless scenarios An intelligent home is primarily about increasing comfort and making everyday activities easier. Automated scenarios voice control remote control from smartphones tablets and smart watches will facilitate your daily routine.
Product Details
Yubii a real all-in-one ecosystem for your smart home Works with over 3000 products from other brands.
Yubii Home is open to the integration of third-party devices thanks to the Z-Wave and WiFi protocols and it can support one IP camera and up to 5 plug-ins.
Manage your home as you want through the Yubii app you can keep your home under control and manage it anywhere you are.
The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or lighting up to a maximum load of 2.0kW.
Control the ON-OFF function of a circuit remotely or using a wall switch
Compatible with all Z-Wave networks
Acts as a repeater expanding your Z-Wave network
Wide range of compatibility with existing light fittings and does NOT require expensive cabling
control loads up to 2kW (8A)
The main differences in the FGS-213 are:
Z-Wave Plus certification
Has power monitoring
230V powered only (this is the same as the FGS-212)
No dry contacts – this is important. It means that the new FGS-213 cannot be used to control low voltage systems such as garden lights and irrigation or where you want a pure volt-free switch such as alarm panels and garage door controls. If you need device with dry contacts please see zConnect Z-Wave Garage Door Opener or FIBARO Z-Wave Sgl Switch InWall or DHS Z-Wave Sgl Switch InWall
Product Details
TheFibaro Z-Wave Single Switch 2is a smart Z-Wave module capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
Fibaro Single Switch 2
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
This Fibaro Z-Wave Single Switch 2 requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply.
The Fibaro Z-Wave Single Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
Raspberry PI with RaZberry Card
Fibaro Home Controller 3/Lite
DHS Z-Wave Universal Remote Controller
DHS Z-Wave Mini Remote Controller
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.
Please check the maximum load before installing or operating. This installation must be done by a certified electrician in Australia and New Zealand. Before engaging an electrician check that they provide an electrical compliance certificate. For warranty claim you have to provide installation compliance certificate from your electrician.
The new FIBARO Smart Module(FGS-214) is a smart Z-Wave wireless module that can control a maximum load of 6.5A in one channel.
Control the ON-OFF function of one circuit or appliance remotely or using a wall switch
Can be used as voltage-free relays (dry contacts)
Compatible with all Z-Wave networks
Acts as a repeater expanding your Z-Wave network
Wide range of compatibility with existing light fittings and does NOT require expensive cabling
The latest generation Z-Wave 500 series chip
Z-Wave Plus certification
Very accurate energy measurement +/- 1 % for power above 5W
Supports secure mode (Z-Wave Network Security) encrypted with AES-128
Dry contacts – this is important. It means that the new FGS-214 can be used to control low voltage systems such as garden lights and irrigation or where you want a pure volt-free switch such as alarm panels and garage door controls.
Product Details
TheFIBARO Smart Module(FGS-214) is a smart Z-Wave controller capable of remotely operating your existing light and appliance fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.
The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.
This FIBARO Smart Module (FGS-214) requires 3-wire (including neutral) installation and works with an AC (230V) power supply.
The FIBARO Smart Module (FGS-214) also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.
This product integrates with Australian certified (921.42 MHz) Z-Wave Controllers – Fibaro Home Center 3/2/Lite
Configuring Z-Wave Devices:
Z-Wave devices often have several configurable parameters which you can change using the Fibaro’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.
Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device.
Please check the maximum load before installing or operating. This installation must be done by a certified electrician in Australia and New Zealand. Before engaging an electrician check that they provide an electrical compliance certificate. For warranty claim you have to provide installation compliance certificate from your electrician.
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colors (white black red blue yellow)
Product Details
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway. The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode each press of the button results in triggering the emergency scene. Designed to be small and light the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk) Note: This device is currently only compatible with the FIBARO Home Center 3.
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colours (white black red blue yellow)
Product Details
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.
The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode each press of the button results in triggering the emergency scene.
Designed to be small and light the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk)
Note: This device is currently only compatible with the FIBARO Home Center 3.
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colors (white black red blue yellow)
Product Details
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.
The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode each press of the button results in triggering the emergency scene.
Designed to be small and light the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk)
Note: This device is currently only compatible with the FIBARO Home Center 3.
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colors (white black red blue yellow)
Product Details
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.
The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode each press of the button results in triggering the emergency scene.
Designed to be small and light the FIBARO Button can be conveniently mounted on any surface and in any location (eg. beside the bed or under the desk)
Note: This device is currently only compatible with the FIBARO Home Center 3.
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colors (white black red blue yellow)
Product Details
The FIBARO Button is a compact battery-powered Z-Wave Plus device that allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.
The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode each press of the button results in triggering the emergency scene. Designed to be small and light the FIBARO Button can be conveninetly mounted on any surface and in any location (eg. beside the bed or under the desk)
Note: This device is currently only compatible with the FIBARO Home Center 3.
TheFIBARO Button is a compact, battery-powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.
Completely wireless
Z-Wave Plus certified
Supports 6 different actions/scenes
Available in multiple colours (white, black, red, blue, yellow)
THE BUTTON
Manually activate or deactivate any device and actions within the FIBARO System
Convenient size and mobility
The Button can be placed virtually anywhere. It can be fixed to a spot and moved when needed.
High quality and battery-powered
The finest standards of production ensure that the device works flawlessly and lasts a long time. The Button is powered by batteries and does not require any wires.
Always close
Use the Button wheneverand wherever you need it.
Visible or hidden
Depending on your needs, you can keep The Button in view or place it out of sight.
Care for your loved ones
The Button is a great convenience for seniors, the sick, and small children along with their caretakers. Your loved ones are a click away and can inform you about their needs or call for help.
Click sequences and even more possibilities
The Button can recognize up to 6 actions. One click can turn off the light, two clicks can activate the AC unit, holding down the button may trigger a scene, etc.
Always in the right place
Place the Button exactly where you could use an additional switch.
Product Details
TheFIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.
TheFIBARO Buttonsupports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.
Designed to be small and light, the FIBARO Button can be conveninetly mounted on any surface and in any location (eg. beside the bed or under the desk)
Note:This device is currently only compatible with theFIBARO Home Center 2.
Technical Specifications
RF Protocol
Z‐Wave Plus (500 series chip)
RF Frequency
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
Power
ER14250 ½ AA 3.6V
Operation Range
Up to 40m indoors (with no obstacles)
Application
Indoor use only
Operation temperature
0 ~ 40 °C
Storage temperature
‐10 ~ 50 °C
Weight
80g
Dimensions
34mm x 46mm (height x diameter)
Housing
ABS
Follow us for more flavours
Be the first to know about new collections and exclusive offers.
Choosing a selection results in a full page refresh.
