AEOTEC

Bypass for Nano Dimmer

Stop dimmed lights flickering.

Dimming energy-saving lights is complicated – there’s a lot of different technology built into modern bulbs.

That’s why dimmed lights sometimes flicker or remain on – power trickles through. Bypass works with Nano Dimmer to remove the signals from your power line that cause low-watt lightbulbs to flicker.

Less than 4W.

If your light switch controls low-voltage lighting that uses less than 4 watts,
Bypass may be needed when using Nano Dimmer for control and automation.

Compatible bulbs.

There are a lot of different types of low-power light bulbs that your home may have; Bypass has been designed to work with most of them. It’s been designed to stop most bulbs from flickering including static and dimmable LEDs and CFLs.

LEDs, Dimmable LEDs, CFLs, Dimmable CFLs

Tiny. Powerful.

Bypass invisibly installs near your light fitting taking up next to no space at all.

Wiring diagram.

3-wire connection with neutral and bypass load.

2-wire connection without neutral and bypass load.

Description

Quick Overview

Pro-tool. Pro-tection.

Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down set it and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined your home is protected by the most advanced Z-Wave flood sensor available.

What Dock enhances.

Monitor 2 areas.

Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6. Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces including floors up to 1 metre away from the installation location of Dock. Only 0.1” thick probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas.

Monitor a whole area.

Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler. While you can be sure that leaks will happen you can’t always be sure where they will happen. That’s particularly true when it comes water tanks and boilers. While they will leak it’s impossible to know from where they’ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs Water Sensor 6 will then detect it.

Product Details

 Power optimized.

Use a USB charger and provided cable to power the Dock from a power outlet. Now Water Sensor 6’s battery acts as an emergency backup.

The dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don’t even have to use them. But if you do Water Sensor 6’s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock.

Wireless optimised.

Raise Water Sensor 6 using Dock and optimize the performance of its Z-Wave Plus antenna.

Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It’s optimized to communicate at over 150 meters in an open space. As Z-Wave is a low-power signal however its wireless range can be impacted by metal objects such as washing machines and fridges. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It’s optimized to communicate at over 150 meters in an open space. As Z-Wave is a low-power signal however its wireless range can be impacted by metal objects such as washing machines and fridges.
Should you be installing it near metal Dock allows you to optimize the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you want to.

In the box.

• 3M double size adhesive tape.
• Desktop style of adapter without pins.
• Dock for Water Sensor
• 6. Mounting screws.
• Spot sensing rope x 2.USB cable for optional power supply.

Product Support

Manuals:

⇒ Aeotec Dock for Water Sensor 6 product manual

Technical Specifications

@6/23

Description

Aeotec Multisensor 7 Recessor

Quick Overview

Smart sensors.

Invisible sensors. Smart sensors. A smart home should be intelligent and it should be invisible. Recessor is the realisation of that principle. It connects to the AEOTEC MultiSensor 7 and AEOTEC TriSensor allowing either to be seamlessly installed and recessed within a wall or ceiling space. Recessor makes Z-Wave multi-sensors subtle.

Product Details

Still perfectly powered.

Whichever power method you’re using with your multi-sensor you can keep on using it with the AEOTEC Recessor.
The AEOTEC Recessor has been designed to allow for each sensor’s batteries to still easily be changed or for the AEOTEC MultiSensor 7’s optional power cable to be used if you prefer to power your sensor without batteries.

Still precise.

The AEOTEC Recessor doesn’t just convert the AEOTEC MultiSensor 7 into a Z-Wave ceiling or beam sensor it converts it into a precise sensor.
Once recessed your AEOTEC MultiSensor 7 can be angled up to 30º within the Recessor fine tuning its measurements and readings to be just where you need them.

Product Support

The  perfect accessories. The AEOTEC MultiSensor 7 ships with 4 different accessories each designed to make the installation of the sensor perfect for your home.

Recessor.
Install the AEOTEC MultiSensor 7 in a ceiling or wall cavity with recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.

Mounting arm. (sold separately)
Discrete and for corner installations the mounting arm allows you to rotate MultiSensor 7 up to 360° and refine its field of view by up to 50°.

USB cable. (sold separately)
After 2 years you won’t have to change batteries if you power MultiSensor 7 via mains power using the provided 1.5 metre USB cable.

Tape.
Weighing only 74 grams the AEOTEC MultiSensor 7 can be easily installed with just the provided double sided tape from 3M.

Manuals:

⇒ Aeotec Multisensor 6 product manual

Technical Specifications

@5/22

Smart Switch 6. Smart sockets.

Plug it into any power outlet in your home and that outlet is instantly smarter.

Smart Switch 6 is a smart plug that lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected.

And because it’s truly smart, Smart Switch 6 offers much more than just wireless control.

Wireless control.
Control it via remote from up to 150 meters away from anywhere in the world via a smart phone or tablet. Smart Switch 6 can be controlled using secure and encrypted wireless technology.

Babysitter.
Control whatever is plugged into a Smart Switch 6 via a schedule and ensure that gaming systems and computers aren’t used when they’re not meant to be.

Safety.
Turn your electronics off in the event of an emergency or a hazard. Smart Switch 6 lets you automatically turn off devices, such as leaking air conditioners and fridges, when they fail.

Spend less.
Monitor and understand exactly how much money the devices plugged into Smart Switch 6 are costing you to run, then create a schedule to reduce your electricity bill.

Uncrowded. Uncomplicated.

Plugs that block multiple power outlets aren’t just inconvenient, they’re annoying. Smart Switch 6 has been designed to reduce the possibility of that happening. At only 60 mm / 2.3 inches in size, Smart Switch 6 can be used without blocking the outlet its installed next to.

Perfectly re-engineered.

Smart Switch 6 benefits from nearly a decade’s worth of engineering know-how. But to build something this perfect, we had to start our engineering process from scratch. Designing the Smart Switch 6 wasn’t simply about making improvements, it was about reimaging what the modern home truly needed from a wireless smart plug.

Safe switch.
The home isn’t just where the heart is, it’s where your family should be safest. In the regions where electrical standards allow, Smart Switch 6 prevents objects from being inserted into it via its inbuilt socket protection.

Powerful switch.
Smart Switch 6 can power devices that draw up to 15 amps of power. But safety comes first, so a different Smart Switch 6 has been engineered for every country it’s available in, ensuring that it’s never overpowered and never unsafe.

Updated switch.
Your smart switch will keep getting smarter thanks to Aeotec’s over-the-air firmware updates. Whenever new firmware is released, you’ll be able to update Smart Switch 6 wirelessly.

Protective switch.
Your loved ones are protected and so are your valuables. Smart Switch 6 features inbuilt surge and overcurrent protection helping to prevent your electronics from ever being damaged.

Perfect distance.
Wireless doesn’t mean weak. Smart Switch 6 can communicate with other Z-Wave devices at distances up to 100 meters / 300 feet.

Plug and play.
Anyone can install Smart Switch 6. Plug it into a wall outlet and press the action button on the front. Everything else is handled by your Z-Wave hub.

Z-Stick Gen5.

Your gateway to building your own Z-Wave gateway

Z-Stick Gen5 lets you build your own gateway. A gateway that is locally hosted. A gateway that is cloud free. One with the features and security your home need. And one that can communicate with over 230 Z-Wave devices as you gradually expand your smart home.

Pick your platform.

Z-Stick Gen5 is a Z-Wave Plus antenna that works with any platform.

It’s been designed to bring Z-Wave to every computer platform. You can use it with a PC, HTPC or laptop, with Mac, Linux or Windows, with single-board computers such as Raspberry Pi, and even select NAS systems such as the Asus’ Asustor.

Using a combination of such platforms and Z-Stick Gen5 immediately gives you 2 big advantages over a lot of standard gateways;

Local hosting.
Remote backups are great. But when your smart home isn’t hosted locally then neither is your home’s security. Take control of your smart home and your security by building your own Z-Wave gateway and hosting it locally.

Cloud free.
Hosting in the cloud seems great until servers go down or gateway makers go out of business. Your smart home suddenly isn’t so smart; it’s completely inoperable instead. Most Z-Wave gateways depend on the cloud – build your own to avoid downtime and a broken smart home.

Pick your software.

Once you’ve decided which platform to use Z-Stick Gen5 with, it’s time to select the software you want to use to power your gateway and your smart home.

Works with open source software.

Ever since the communication code of Z-Wave was made public by its creators, open source software has come a long way. Typically paired with Raspberry Pi, Z-Stick Gen5 can be used with these open source platforms to power your Z-Wave smart home.

Depend on Z-Wave.

Z-Wave is huge. There are over 2,100 different devices available including a huge range of control and automation devices made by Aeotec. And Z-Stick Gen5 doesn’t just offer Z-Wave, it offers the best version of it.

Z-Stick Gen5 is powered by Z-Wave Plus and Aeotec’s Gen5 stack.

• Wireless range up to 150 metres / 492 feet.
• 250% more communication bandwidth.
• Powers over-the-air firmware updates for Z-Wave devices.
• AES-128 bit encrypted communication and security.

Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices.Works with Windows / Mac / Linux (including Raspberry Pi) to create a Z-Wave gateway for control of Z-Wave and Z-Wave Plus devices.
Tiny but powerful; 1.1 x 0.4 x 3.5 inches in size and capable of controlling up to 232 different Z-Wave devices.
Can be used to upgrade the firmware of compatible Z-Wave Plus devices that can accept OTA / wirelss firmware upgrades.Compatible with Z-Wave enabled, home automation software including Home Assistant, Home Seer, Indigo 7, OpenHab, and OpenHab2. 
No software included.

Technical Specifications

Door / Window Sensor 6

Any door. Any window. Any home.
Invisibly.

Is a door opened or closed? Is a window? Have they been opened when they shouldn’t be?

Simple questions. Powerful questions.

Designed to blend into any home and any décor, Door / Window Sensor 6 has been engineered to make your home smarter. Intelligence is what makes the connected home a smart one. With Door / Window Sensor 6 your Z-Wave system will have intelligence about the key doors and windows in your home. It’ll know when they’re open. It’ll know when they’re shut. And it’ll know when they’ve been opened and they shouldn’t be.

Door / Window Sensor 6 will provide intelligence to 2 of the core tasks that any home intelligence system should be responsible for: its security and its control of your home.

Strong Security

With Z-Wave your home is smarter. With Door / Window Sensor 6 your Z-Wave security system is also smarter. Monitoring your entrances 24/7, this tiny sensor can detect when a door or window has been opened. If your connected-alarm is armed, Door / Window Sensor 6 can trip it, control lights and sirens, and send notifications about a potential emergency direct to your mobile phone.

Real-Time Notification

Intelligence for more than just security, Door / Window Sensor 6 can be used to manage your home in real-time. Able to control any other Z-Wave device, when something in your home is opened or closed you’ll be able to control everything from welcome lights to thermostats, and to keep logs and send notifications.

Amazingly slim.

Traditional security sensors have always been bulky. They’ve been stuck onto doors and windows, and they’ve stuck out over 1 inch. There’s no nice way to say it: they’ve been ugly. Door / Window Sensor 6 changes all that.

More than 50% thinner than its competition, Door / Window Sensor 6 marries form with function. It offers the same, necessary functionality that you need from a security device but it packages it all within a beautifully designed device that is only 9mm deep and 72mm along the edge. It’s what we consider to be subtle security.

Accuracy.
Utter accuracy.

Despite being so slim, Door / Window Sensor 6 doesn’t compromise on accuracy or quality.

Whenever a door or window is opened, you want to know and this tiny sensor will detect it faultlessly. Door / Window Sensor 6 is built with 2 powerful magnetic reed switches placed along its edge. They’ll communicate with a provided slim-line magnet that measures is only 0.09” / 2mm wide and can be placed up to 2.2cm / 0.9” away.

Batteries that last.

You want intelligence from a sensor but not to have to change its batteries every few months. Built from technology originally designed for leading smart phones, Door / Window Sensor 6’s lasts over 1 year on windows and 10 months on frequently used doors. When it needs it, simply remove the sensor from its mounting plate and recharge it over a few hours via USB.

Door / Window Sensor 6’s perfect mix of slim design and strong battery performance is possible because it’s powered by 500mAH batteries and Aeon Labs’ Gen5 Z-Wave technology. That means a strong battery performance is coupled with wireless technology that uses 50% less power to communicate.

Simple to use.
Just as simple to install.

To use it, all you have to do is open the door or the window its attached to. Installing Door / Window Sensor 6 is just as easy.

Door / Window Sensor 6 has been engineered with 3 parts; a sensor, an invisible mounting bracket and a slim magnetic shard. Each part isn’t only responsible for making Door / Window Sensor 6 so powerful, but also for making it so easy to install.

Both the mounting bracket and the magnetic shard can be installed in moments with options including double sided tape, tiny screws and even a dab of glue. Once that’s done, the main sensor simply needs to be connected to a Z-Wave network and attached to its mounting plate. In minutes, you’re done.

Technical Specifications

 The DHS Z-Wave Mini Remote controller allows the user to wirelessly control home appliances using Z-Wave enabled devices.

Nano Dimmer

Make all your lights smart lights. Simply.

Nano Dimmer dramatically improves the lighting in your home. Our 3rd generation of invisible lighting controller outperforms all that has come before it. Dimming is smoother. Compatibility is broader. Lighting is faster and more responsive. Automation and intelligence have never been more powerful. And it comes in such a small size, that you’ll be amazed at just how much functionality we were able to craft inside.

Perfect lighting is a part of every truly smart home. Lighting that is responsive. That is always the right brightness. That is always on when you need it, and off when you don’t. But perfect lighting has never been easy.

Instead, perfect lighting has been too complicated to achieve. In the past, to automate your lights with Z-Wave you’ve had to worry about the type of wiring you have, whether your lighting is trailing or leading edge, and whether you’re using TRIACs or thyristors. Far too complicated. Get any of those wrong and your connected lighting would quickly become a connected headache.

No more. Nano Dimmer offers smart, connected lighting without any of the hassle.

Easy to install.

Nano Dimmer lets you add new and existing lights to your Z-Wave system. It makes your lights smarter. It makes them responsive. It gives you the ability to control them, schedule, dim them and brighten them.

All that control and intelligence comes from simply wiring Nano Dimmer behind an existing wall switch.

The best wiring
compatibility yet.

Light bulb compatibility used to be complex. Now it’s never been easier.

Powered by both its dedicated Lighting Engine and a dedicated 32-bit CPU, Nano Dimmer calculates lighting at unparalleled speeds. It calculates perfectly smooth dimming, and it calculates perfect bulb compatibility, self-adjusting its settings whenever a new bulb is attached.

That means that you won’t ever have a problem finding lights that works with Nano Dimmer’s list of compatible bulbs.

or Works without any switch at all.

When you enhance your lighting with Nano Dimmer, you do so with the connectivity of Z-Wave Plus. Connectivity that lets you intelligently automate it, connectivity that lets you responsively control it, and connectivity that lets you manage and monitor it even when you’re not home.

Perfectly safe.

Your lighting may be perfect, but that doesn’t mean the electricity powering it is. Things happen. Surges happen and are common, and Nano Dimmer protects against them. With a in-built surge and overload protector, Nano Dimmer not only keeps your lighting connected it keeps them protected.

Description

Quick Overview

Control any switch. From anywhere. Wirelessly.
Power sockets and light switches: amazing inventions. They literally changed the world. But if you’re not standing right next to them or can’t reach them they’re limited. No more. The future is smarter. So is your home. The Aeotec Smart Switch 6 offers completely wireless control of your switches and sockets.

Enhancing a power outlet near you.
Every country is different. And we’ve engineered a different plug for every country. Within the dramatically small size of the Aeotec Smart Switch 6 lies engineering focused not just on intelligence and reliability but also on safety. From Australia to Andorra from the United States to the United Kingdom every Aeotec Smart Switch 6 has been custom engineered to maximize the volts and amperage it can offer without ever compromising on quality or your safety.
The Aeotec Smart Switch 6 isn’t just a smart switch it’s a safe switch.

Product Details

Compact without compromise at just 60 x 60 mm the Aeotec Smart Switch 6 is over 84% smaller than  first edition. And even though it’s 43% smaller than the recently release Smart Switch Gen5 it still benefits from its industry-leading technology.

Smart plug.

Convenient plug. There’s smart. There’s convenient. The Aeotec Smart Switch 6 is both.

Uncrowded.

Uncomplicated. Plugs that block multiple power outlets aren’t just inconvenient they’re annoying. The Aeotec Smart Switch 6 has been designed to reduce the possibility of that happening. At only 60 mm / 2.3 inches in size the Aeotec Smart Switch 6 can be used without blocking the outlet its installed next to.

Safe switch.

The home isn’t just where the heart is it’s where your family should be safest. In the regions where electrical standards allow the Aeotec Smart Switch 6 prevents objects from being inserted into it via its inbuilt socket protection.

Protective switch.

Your loved ones are protected and so are your valuables. The Aeotec Smart Switch 6 features inbuilt surge and overcurrent protection helping to prevent your electronics from ever being damaged.

Powerful switch.

The Aeotec Smart Switch 6 can power devices that draw up to 15 amps of power. But safety comes first so a different Aeotec Smart Switch 6 has been engineered for every country it’s available in ensuring that it’s never overpowered and never unsafe.

Perfect distance.

Wireless doesn’t mean weak. The Aeotec Smart Switch 6 can communicate with other Z-Wave devices at distances up to 100 metres / 300 feet.

Updated switch.

Your smart switch will keep getting smarter thanks to Aeotec’s over-the-air firmware updates. Whenever new firmware is released you’ll be able to update your Aeotec Smart Switch 6 wirelessly.

Plug and play.

Anyone can install the Aeotec Smart Switch 6. Plug it into a wall outlet and press the action button on the front. Everything else is handled by your Z-Wave hub.

Product Support

Manuals:

⇒  Aeotec Smart Switch 6 product manual

Technical Specifications

@9/29

Range Extender 6.

The Range Extender 6 keeps it reliable. We all know how annoying weak wireless signals can be. Weak WiFi and poor phone signals are frustrating. Imagine if your smart home was also plagued by weak wireless signals and the same frustrations? Your smart home would not be very smart. The Range Extender 6 from Aeotec ensures that your connected home stays connected. It intelligently listens to the commands and reports that your Z-Wave network sends, actively capturing weak signals and then amplifying and repeating them.

Repeats wireless signals.

Repeats wireless signals.For your smart home to be perfect, its wireless signals need to be reliable. Range Extender 6 captures weak or slow signals and efficiently repeats them on to the rest of your Z-Wave network.

Amplifies wireless signals.

Amplifies wireless signals.Not only does Range Extender 6 accurately repeat Z-Wave signals, it amplifies them too and helps improve the reliability and accuracy of your Z-Wave network.

Big on impact. Small in size.

Range Extender 6 is a power-outlet friendly device, designed to be as small and as compact as possible without compromising on performance. so that it doesn’t block neighbouring power outlets.

Technical Specifications

Recessed Door Sensor

The Z-Wave door sensor is finally invisible.

Is a door opened or closed? Is a window? Have they been opened when they shouldn’t be?

Simple questions. Powerful questions.

Designed to blend into any home and any décor, Door / Window Sensor has been engineered to make your home smarter. Intelligence is what makes the connected home a smart one. With Door / Window Sensor your Z-Wave system will have intelligence about the key doors and windows in your home. It’ll know when they’re open. It’ll know when they’re shut. And it’ll know when they’ve been opened and they shouldn’t be.

At less than 0.4” in width some might call it small and compact. We prefer to call it invisible. It’s the Z-Wave door sensor that’s been designed as the door sensor should have always been. Powerful but invisible. Recessed Door Sensor is a clever piece of technology that installs simply within your door’s frame. It’s as beautiful as the rest of your home. You never see it; you just feel its benefits.

Invisible intelligence.

The beauty of an invisible installation is complemented by the beauty of a simple installation.

Installing Recessed Door Sensor is easy. Adding it to your home’s network takes no more than activating its battery and syncing it with your Z-Wave network. Making the whole thing invisible means little more than a drill hole hidden away on the top of your door. It’s the sort of installation that takes no more than 10 minutes but provides years’ worth of benefits.

Perfect sensor.
Perfect compatibility.

1 year battery life.
And after a year, changing the battery is as simply as lifting Recessed Door Sensor out of your door, swapping the battery, and inserting the sensor back into your door.

Perfect wireless.
Security sensors have to be dependable. Recessed Door Sensor is. It’s wireless communication range reaches Z-Wave’s maximum: up to 150 metres / 492 feet when unobstructed.

Gen5.
A security sensor has to be secure. Recessed Door Sensor couples Z-Wave Plus with Aeotec’s Gen5. That enables the sensor to utilise AES 128-bit communication encryption in order to secure your home.

Z-Wave Plus.
Furthering your ability to depend upon it, Recessed Door Sensor is built upon the latest version of Z-Wave, Z-Wave Plus. That enables the sensor to communicate 250% faster and with 50% less battery use than older sensors.

More Secure

With Z-Wave your home is smarter. With Door / Window Sensor your Z-Wave security system is also smarter. Monitoring your entrances 24/7, this tiny sensor can detect when a door or window has been opened. If your connected-alarm is armed, Door / Window Sensor 6 can trip it, control lights and sirens, and send notifications about a potential emergency direct to your mobile phone.

Real-Time Notification

Intelligence for more than just security, Door / Window Sensor 6 can be used to manage your home in real-time. Able to control any other Z-Wave device, when something in your home is opened or closed you’ll be able to control everything from welcome lights to thermostats, and to keep logs and send notifications.

Technical Specifications

Z-Wave LED Bulb Gen5 Multicolour.

Let there be light. Perfect light.

Description

Quick Overview

Three different sensors built into the AEOTEC TriSensor’s small finish.
A motion sensor to monitor presence in your rooms a temperature sensor to manage its environment and a light sensor to manage connected lighting and shutters.

Product Details

Motion sensor

Motion sensor. Motion for security. Motion for presence. Motion for management. The AEOTEC TriSensor is perfect for more than just an intelligent security system. With to a 7-metre range the AEOTEC TriSensor captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data.
The AEOTEC TriSensor makes your home automation system more powerful and more intelligent.

Temperature sensor.

From motorised curtains and windows to fans and thermostats there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. The AEOTEC TriSensor provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -15~50 °C and reporting those temperature changes back to a smart home gateway.

Light sensor.

Automated lighting is only as smart as the system that powers it. With the AEOTEC TriSensor’s digital light sensor measuring the level of light in a room your home control system will be able to intelligently maintain its ambiance. From opening and closing curtains to setting lights to be the perfect level be it day or night the AEOTEC TriSensor is the smarts behind smart lighting.

Product Support

The perfect sensor comes with the perfect accessories. The AEOTEC TriSensor has three different accessories each designed to make the installation of the sensor perfect for your home.

Place it anywhere.

Recessor. (sold separately)

Install the AEOTEC TriSensor in a ceiling or wall cavity with a recessor (sold separately) and just 12 mm will extrude. Features magnetic clasps for simple removal of the sensor.

Mounting arm.
Discrete and for corner installations the mounting arm allows you to rotate your AEOTEC TriSensor to best insure motion is detected when you want it to be.

Tape.
Weighing only 52 grams the AEOTEC TriSensor can be easily installed with just the provided double sided tape from 3M.

Manuals:

⇒ Aeotec TriSensor product manual

Technical Specifications

@9/28

Water Sensor 6.

Flood sensor.
Leak sensor.
Safety sensor.

Water Sensor 6. Your home’s 6th sense.

We protect our homes in so many ways. With smoke sensors, door locks, and security systems. But more homes are damaged each year by small leaks than by devastating fires or burglaries. Water Sensor 6 changes that, using Z-Wave Plus to silently monitor areas of your home at risk of water and then taking action when the worst occurs.

Total Control.

Water Sensor 6 monitors your home.

Leaks & bursts.
Water Sensor 6 can detect minuscule amounts of water – as little as 0.5mm / 0.02” of water. That makes it your first line of defence against damaged plumbing.

Floods.
Whether a small amount or large, Water Sensor 6 also is perfect at protecting against the floods you can anticipate, such as sumps and in basements.

Overflows.
Accidents happen but that doesn’t make the damage caused by forgotten taps any less expensive. Water Sensor 6 can alert you to the water you’ve forgotten to turn off before it’s too late.

Water Sensor 6 helps protect your home.

Water Sensor 6 doesn’t just monitor for when a pipe has burst or is leaking, it can take protective measures to help limit the amount of damage caused.

Using the power of Z-Wave you can put Water Sensor 6 in control of other Z-Wave devices so that, when the worst occurs, Water Sensor 6 do anything from sending alerts to turning off electricity and water valves in order to protect your home and your loved ones.

Auto-close water valves.
In the event of a pipe burst, use Water Sensor 6 to turn off electronic water valves via Z-Wave.

Turn on sump pumps.
When water is detected, turn on electronic sump pumps your gateway or Z-Wave switches.

Auto turn off power.
Water and electricity don’t mix. Protect your home and family by turning off electronics in the event of a leak or flood.

Leak protection anywhere.

Leaks often happen in the worst of places. Behind things, under things, and in all those hard-to-see places that mean you don’t see the leak until it’s far too late.



That’s why Water Sensor 6 is so slim – it’s only 3.8cm wide and 2.4cm tall. That means Water Sensor 6 will fit and blend in wherever you need it, whether that’s in a hard to reach space or one where it can be seen.

The leak sensor with sensors.

Water Sensor 6 is a part of our Z-Wave intelligence range. It’s been designed to protect your home and it’s also been designed to make your smart home smarter. Three separate sensors are crafted into each Water Sensor 6.

Each of these sensors can be used to create intelligent home control scenarios via your Z-Wave gateway including the management of underfloor heating, HVAC control, and driveway heating.

Water sensor.
4 gold tipped water probes actively monitor for leaks and drips.

Vibration sensor.
Tamper and emergency events are confirmed by an algorithm that includes vibration detection.

Temperature sensor.
Crafted for heating management, an inbuilt temperature sensor can monitor temperatures between -20ºC and 100ºC (-4ºF to 212ºF).

Or Add a Docking station for more

Pro-tool. Pro-tection.

Water Sensor 6 protects your home from leaks and floods in the easiest of ways. You place it down, set it, and forget it. Dock is a pro-tool that dramatically enhances the most important features of Water Sensor 6. With Dock and Water Sensor 6 combined, your home is protected by the most advanced Z-Wave flood sensor available.

Monitor 2 areas.

Connect 1 or 2 of the provided spot sensors to Dock to monitor for leaks up to 1 metre away from Water Sensor 6. Most water leak sensors let you only monitor a single area. Dock enhances Water Sensor 6 to be able to monitor 2 separate areas using spot sensors. Each sensor is a probe that can monitor surfaces, including floors, up to 1 metre away from the installation location of Dock. Only 0.1” thick, probes are perfect for remote monitoring and to monitor in exceptionally tight and hard to reach areas.

Monitor a whole area.

Connect a lasso sensor to encircle and monitor an entire area such as a hot water boiler.While you can be sure that leaks will happen, you can’t always be sure where they will happen. That’s particularly true when it comes water tanks and boilers. While they will leak, it’s impossible to know from where they’ll leak. Dock solves that. Simply connect a lasso sensor and encircle an object completely. Wherever the leak occurs, Water Sensor 6 will then detect it.

Power optimised.

Use a USB charger and provided cable to power Dock from a power outlet. Now Water Sensor 6’s battery acts as an emergency backup. Dock can be powered by mains electricity. Simply plug it into a power outlet using the provided USB cable and a 5VDC, 0.5A USB adaptor; a common smartphone charger. Doing so means that Water Sensor 6 no longer needs to depend on batteries; you don’t even have to use them. But if you do, Water Sensor 6’s battery will be used as a backup battery that offers the same battery life as the sensor itself: 2 years. Plenty of time to get power restored to Dock.

Wireless optimised.

Raise Water Sensor 6 using Dock and optimise the performance of its Z-Wave Plus antenna. Water Sensor 6 uses Gen5 and Z-Wave Plus for wireless communication. It’s optimised to communicate at over 150 metres in an open space. As Z-Wave is a low-power signal however, its wireless range can be impacted by metal objects such as washing machines and fridges.

Should you be installing it near metal, Dock allows you to optimise the wireless performance of Z-Wave. Use it to install Water Sensor 6 away from metal objects while still monitoring the areas that you wanted to.

Technical Specifications

WallMote. Wireless Z-Wave control. On tap.

On any wall.

WallMote is the wall switch that you can install anywhere. Wirelessly.

Whatever the room, whatever the wall, WallMote is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.

Simple to install.

WallMote is the wall switch for anywhere because of it is simple to install. Mounting it requires just two steps.

1. Attach the mounting plate.

WallMote’s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done.

2. Attach WallMote.

WallMote is attractive. Literally. Simply place it in front of the mounting plate and it will magnetically attach.

Or anywhere.

It is great as the wall switch that you can place anywhere. But WallMote is also the wall switch that you can use anywhere.

Designed for simple recharging and portable use, WallMote’s magnetic mount means that you can simply pull it away from the wall it is mounted on whenever you need it somewhere else. WallMote. Coffee-table-Mote. Bedside-Mote. Anywhere-Mote.

Control on tap.

Control one Z-Wave device. Control many. And all with a single tap.

There is simplicity in tapping touch glass. smartphones proved it. There is power too. Each of WallMote’s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between.

Tap. Control.

Device control. Or Scene control.

Tap to control a single Z-Wave device from WallMote or press and hold for advanced controls.

Group Z-Wave and other connected devices together via your gateway and activate them via WallMote.

Tap control.

WallMote does not just offer control on tap. Each button is touch sensitive, meaning you can access new commands and control scenes simply by holding your finger a little longer.

Slide control.

Press and hold. Swipe up. Swipe down. Tap. Through capacitive touch, each of these lets WallMote do something different. Dim lights on a whim. Open curtains to let in a little bit more light. Through the power of touch, WallMote does not just offer whole home control, it offers precise control on demand.

Wireless wall switch.
Wireless home control.

Control a light. Control a room. Control a home.

Because WallMote communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can. Even things that are not Z-Wave. Smart lighting from Philips Hue? Check. Connected music from Sonos? Easy. If it is connected to your gateway, simply add it to a scene that WallMote can control and it is on top.

Wireless switch.
To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres / 492 feet.

Secure switch.
Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.

Technical Specifications