Sort by:
The PHILIO Z-Wave PIR Recessed is a small, battery powered motion sensor designed to be installed within a wall or ceiling.
- 2 year battery life
- Detects movement up to 10m
- Z-Wave Plus certified
- IP43 protection class - suitable for light outdoor use
The PHILIO Z-Wave PIR Recessed is a small, battery powered motion sensor capable of detection motion up to 10m. The sensor is designed to be discretely installed within a cavity in a wall or ceiling with an easy to use spring mechanism holding it in place.
The PHILIO Z-Wave PIR Recessed is perfect for controlling the lights in any household. You can set them to switch ON when someone enters the room at night-time but not daytime.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Vera Edge/3/Lite
- Fibaro Home Center 2/Lite
Specification
|
RF Protocol
|
Z‐Wave
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave sensor
|
|
Z‐Wave Certification
|
Z-Wave Plus (500 series chip)
|
|
Power
|
1 x CR123A Lithium ion battery
|
|
Communication Range
|
Up to 30m indoors with no obstacles
|
|
Detection Range
|
Up to 10m
|
|
Application
|
Indoor and outdoor
|
|
Operation temperature
|
-5 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 80 °C
|
|
Weight
|
55g
|
|
Housing
|
ABS
|
|
Dimensions
|
(LxWxH) 70mm x 70mm x 45mm |
The PHILIO Z-Wave Humidity Sensor is a battery powered, temperature and humidity sensor ideal for use in bathrooms or basements alongside a Z-Wave controlled exhaust fan to maintain a suitable level of humidity and prevent excessive dampness and mould formation.
- Z-Wave Plus certified
- Configurable temperature and humidity report triggers
- Long battery life and low power reporting
- Supports Over the Air (OTA) firmware updates
Product Details
The PHILIO Z-Wave Humidity Sensor is designed for use in bathrooms, basements and other areas frequently subjected to excessively high or low humidity. It can be used alongside a Z-Wave controlled exhaust fan or heating/cooling system to ensure that a suitable level of humidity is maintained at all times preventing the formation of mould and other humidity related property damage.
The PHILIO Z-Wave Humidity Sensor supports Over the Air (OTA) firmware updates and reports its battery status making it very easy to maintain.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Vera Edge
- Fibaro Home Center 2/Lite
Technical Specifications
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave sensor
|
|
Power
|
CR123A Lithium battery (included)
|
|
Operation Range
|
Up to 40m indoors (with no obstacles)
|
|
Application
|
Indoor
|
|
Operation temperature
|
-10 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 60 °C
|
|
Weight
|
60g
|
|
Dimensions
|
80mm x 27mm x 23mm
|
|
Housing
|
ABS
|
The PHILIO Z-Wave Multi-Sensor is a battery powered, PIR, temperature and light level sensor, all in one small package.
- Z-Wave Plus certified
- Configurable temperature and light level report triggers
- Long battery life and low power reporting
- Supports Over the Air (OTA) firmware updates
Product Details
The PHILIO Z-Wave Multi-Sensor allows you to detect motion and to measure a room’s ambient temperature and light intensity. When included into a Z-Wave network with a home automation controller or Z-Wave gateway it can be used to trigger scenes and activate other Z-Wave devices within your Z-Wave network. It can also alert the user of intruders via their Z-Wave gateway.
The PHILIO Z-Wave Multi-Sensor supports Over the Air (OTA) firmware updates and reports its battery status making it very easy to maintain.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Vera Edge, Vera Plus, Vera Secure
- Fibaro Home Center 2/Lite
Technical Specifications
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave sensor
|
|
Power
|
CR123A Lithium battery (included)
|
|
Operation Range
|
Up to 40m indoors (with no obstacles)
|
|
Application
|
Indoor
|
|
Operation temperature
|
-10 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 60 °C
|
|
Weight
|
60g
|
|
Dimensions
|
80mm x 27mm x 23mm
|
|
Housing
|
ABS
|
The PHILIO Z-Wave PIR Sensor is a small, battery powered motion sensor capable of detection motion up to 10m. The sensor is attached to a magnetic mount which can be placed on a wall or ceiling and allows for 360° adjustable viewing direction.
This device also includes a lens cover which can be used to block the sensor's view of an area where detection is unnecessary.
The PHILIO Z-Wave PIR Sensor is perfect for controlling the lights in any household. You can set them to switch ON when someone enters the room at night-time but not daytime.
This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:
- Vera Edge/3/Lite
- Fibaro Home Center 2/Lite
SPECS
|
RF Protocol
|
Z‐Wave
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z-Wave sensor
|
|
Z‐Wave Certification
|
Z-Wave Plus (500 series chip)
|
|
Power
|
1 x CR123A Lithium ion battery
|
|
Communication Range
|
Up to 30m indoors with no obstacles
|
|
Detection Range
|
Up to 10m
|
|
Application
|
Indoor and outdoor
|
|
Operation temperature
|
-5 ~ 40 °C
|
|
Storage temperature
|
‐10 ~ 80 °C
|
|
Weight
|
55g
|
|
Housing
|
ABS
|
|
Dimensions
|
(LxWxH) 45mm x 50mm x 45mm |