Sort by:
Nice FTA1 battery kit for FT210 / FT210B photocells - for home automation
Nice FTA1 battery kit for FT210 / FT210B photocells - for home automation
Description
7Ah battery kit for FT210/FT210B transmitters for intensive use
@8/27
Description
Quick Overview
- IBT4N is an interface device that enables the connection of the Oview programming unit to the Nice control unit fitted with an”IBT4N” programming connector that implemented the Opera system.
- BT4N enables connection of the programming unit Oview to a control unit or to a number of automation.
- IBT4N is activated only when it is connected to the control unit by means of the ”IBT4N” connector on the unit as it is powered by the connector.
Caution!
- Do not fit IBT4N in positions other than those specified.
- Before connecting IBT4N disconnect the power to the control unit.
- After the connection turn on the power supply.
To go to the manufacturer’s website click >>
@8/27
Description
Quick Overview
We are excited to announce the new colorful line of 2-channel transmitters by Nice Apollo! At just 1.2″ x 2.2″ the miniature Inti transmitter will fit in your purse car or hand with ease. The Inti gate opener remote uses data processing and recognition systems that increase its degree of security delivering a threefold reduction in automation response time. This makes for faster opening and closing times allowing you to get where you need fast!
Do you find programming your remotes and transmitters frustrating? Thanks to the Inti enabling code exchange you can easily program your transmitter using a transmitter already programmed to your receiver. This black 433.92 MHz rolling code transmitter manages Identity Codes and Certificates and has a self-learning and built-in proximity receiver. With 72 bit O-Code encoding it is also compatible with Nice FLOR encoding receivers.
Available in six colors and ideal for multi-user systems you are sure to find the right transmitter to fit your personal style. The back side features a scratch-resistant coating a perk that also makes our Inti remote control an elegant colorful keyring!
Technical Specifications
Carrier Frequency |
433.92 MHz |
Power Supply |
3 VDC Lithium battery type CR2032 |
Estimated Range |
Outdoors: 150 m Inside Building: 30 m |
Encoding |
O-Code 72 bit rolling code |
Protection Level |
IP40 |
Operation temperature |
-20 – 50°C |
Weight (kg) |
0.015 |
Dimensions (mm) |
55 x 30 x 60 |
@8/26
Description
Quick Overview
MC824HR is an electronic control unit for automating swing gates. MC824HR is able to command electromechanical actuators of the type indicated in “Table 4” (Please refer to the user and installation manual below). It incorporates a system that verifies the force of the motors connected to it (amperometric function). This system allows for automatically detecting the limit switches memorising the work time of each individual motor and detecting any obstacles during normal movement. These characteristics simplify the installation considerably as the leaf offset and work times do not require any adjusting.
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
MC824HR |
Power Supply |
MC824HR control unit: 230 Va ± 10% 50–60 Hz MC824HR/V1 control unit: 120 Va ± 10% 50–60 Hz |
Protection Level |
IP54 with container intact |
Operation temperature |
-20 – 55°C |
Weight |
4.1 kg |
Dimensions (mm) |
310 x232x122 |
@51/80
Description
Quick Overview
This Nice shockproof is used with NICE WAY remote controls to protect them from garden humidity and shocks.
It comes in a small elegant design which makes it practical and ergonomic.
This shockproof holder comes in a white shock proof rubber case to protect the transmitting module. NICE table shockproof holder is fully directional and provides greater reception.
This Nice shockproof is functional appealing and highly adapted for residential use.
Technical Specifications
@4/20
Description
Quick Overview
Enjoy a high level of comfort with this model. Indeed this accessory enables you to efficiently operate your gates garage doors blinds or roller shutters. This model stands out for its simple and unique design. The case and the way in which the buttons are placed make it an original and extremely elegant gadget. Not to mention its refined finishing touches. This model is also extremely easy to use and to programme requiring no specific tools.
To find out more about this model feel free to browse the user manual below. This of course includes all the information required for the model’s use. Moreover the programming text details all the steps to follow when setting up the model making it very easy for you.
Technical Specifications
@3/20
Description
Quick Overview
Communication: One-Way And Two-Way Radio Communication
Compatibility: “O-Code” “FloR” “TTS” “Smilo” And “Flo” One-Way Radio Encoding Systems And With The “BD” Two-Way Encoding System.
Identification: Known as the “Certificate”. This allows for accessing several operations
Automation: Automatically recognizes the characteristics of the control unit on which it is installed and self-sets in the
following way: If the control unit manages the “BusT4” the receiver makes available up o 15 different commands. If the control unit DOES NOT manage the “BusT4” the receiver makes available up to 4 different commands.
Technical Specifications
| Product Name | Two-way receiver OXIBD |
Reception frequency |
433.92 MHz |
Transmission frequency |
433.82 MHz |
Sensitivity |
– 108 dBm |
Encoding |
O-Code 72 bit rolling code |
Absorption |
50 mA (maximum) |
Operation temperature |
-20 – 55°C |
Weight (kg) |
0.022 |
Dimensions (mm) |
49.5×41.9×18 |
@13/34
NICE Paired Wireless Photocell Adjustable FT210 - for home automation
NICE Paired Wireless Photocell Adjustable FT210 - for home automation
Description
NICE Paired Wireless Photocell Adjustable FT210
Quick Overview
The 210° solution
The beam of the Nice FT210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell. The FT210 photocells are available with relay output.
FT210B can only be connected to ‘BlueBUS’ networks.
Numerous models and countless advantages: The new photocells are available with relay output (FT210) or with the Nice BlueBUS technology (FT210B). With the BlueBus technology all devices can be easily connected to the control unit with just two wires.
Resilient and safe
Polycarbonate casing; FA1 vandal-proof metal shell (optional).
Cutting-edge technology: The problem of interference between the sensors and the automatic synchronisation between several pairs of photocells is solved by the anti-blinding circuit; high range adjustable on 2 levels; synchronising circuit; alignment with proportional LED for easy and safe installation.
@17/40
NICE Paired Wireless Photocell FT210B – Brilliant - for home automation
NICE Paired Wireless Photocell FT210B – Brilliant - for home automation
Description
NICE Paired Wireless Photocell FT210B
Quick Overview
The 210° solution
The beam of the Nice FT210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell. The FT210 photocells are available with relay output.
FT210B can only be connected to ‘BlueBUS’ networks.
Numerous models and countless advantages: The new photocells are available with relay output (FT210) or with the Nice BlueBUS technology (FT210B). With the BlueBus technology all devices can be easily connected to the control unit with just two wires.
Resilient and safe
Polycarbonate casing; FA1 vandal-proof metal shell (optional).
Cutting-edge technology: The problem of interference between the sensors and the automatic synchronisation between several pairs of photocells is solved by the anti-blinding circuit; high range adjustable on 2 levels; synchronising circuit; alignment with proportional LED for easy and safe installation.
@20/44
Description
Quick Overview
Pro-View is a unique programming tool of the latest generation designed for the installer. Thanks to its multiple functions Pro-View allows the professional to operate in complete comfort facilitating the management of installation configuration and maintenance operations of Nice automations in the Gate & Door line for gates barriers and garage doors.
Installation is even simpler and more comfortable: with Pro-View and the MyNice Pro App the installation configuration procedures are simple and effective and can be carried out in all phases of automation programming in comfort via your smartphone.
The MyNice Pro app makes the installer’s work easier: with the new app the installer has a series of tools available that make operations immediate. A simple wizard helps programming the automations a short description for each parameter simplifies the configuration procedure and the search function makes to easy find the parameter needed to program to complete the installation.
Better maintenance interventions: the Nice technology recognizes the Gate&Door automation control unit you are working on allowing you to check and update the firmware read the relevant manual and access all the parameters with the search function.
No need to move to reach customers: if the customer calls to replace the remote control or to add one it is possible to access the customer’s installation database remove the previous remote control and associate the new one. All from the comfort of the office.
With Nice Cloud everything you need is always under control: in the dedicated Nice Cloud space the entire company can be managed and monitored from a single dashboard. List of installers geolocation of customers in the geographical map overview of interventions and statistics can be easily consulted by accessing your space increasing efficiency and reducing response times.
More service and closer to the professional thanks to Nice Pro-View and MyNice Pro App!
@38/71
Description
NICE Rack 6 Down 1m long
Quick Overview
For the gearmotors of average power. Attached to the door with self-drilling screws. Recommended especially for galvanized gates where spacers can not be welded without destroying corrosion protection. 1m sections facilitate easy mounting on the gate.
The set includes:
- 1m rack section
- 4 steel washers with screws
Technical Specifications
Product Name |
NICE 6 Rack Down 1m long |
Gate Support |
maximum 500 kg |
Weight |
3kg |
Dimensions (mm) |
25x20x1000 |
@5/22
Description
Quick Overview
For the gearmotors of average power. Attached to the door with self-drilling screws. Recommended especially for galvanized gates where spacers can not be welded without destroying corrosion protection. 1m sections facilitate easy mounting on the gate.
The set includes:
- 1m rack section
- 4 steel washers with screws
Technical Specifications
Product Name |
NICE 6 Rack Down 1m long |
Gate Support |
maximum 500 kg |
Weight |
3kg |
Dimensions (mm) |
25x20x1000 |
@5/22
Description
NICE RUN1200HS Motor Kit
Quick Overview
User-friendly: thanks to the Nice BlueBUS technology the control unit can be connected to up to seven couples of photocells control security and signalling devices using two wires only.
Practical: the control unit and PS524 battery charger can be connected by means of a simple connector and can be housed directly inside the motor.
Advanced: the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.
Sturdy: base and release in pressure die cast with easy to open handle.
Very quiet: gear motor on bearings.
The kits include:
- 1 x RUN1200HS Hi-speed electro-mechanical gear motor (24v)
- 1 x RUA6 Integrated Control Unit
- 2 x ON2E Transmitters
- 1 x EPMB Pair of BlueBUS Photocells
- 1 x OXI Receiver
Product Support
Manuals:
⇒ Nice RUN400HS / RUN1200HS Manual
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
RUN1200HS |
Battery Backup Option |
Yes |
Gate Speed (m/sec) |
0.37 |
Torque |
500 Nm |
Protection Level |
IP44 |
Operation temperature |
-20 – 50°C |
Weight |
8kg |
Dimensions (mm) |
330x195x277 |
@113/137
Description
Quick Overview
Strength and reliability: robust structure in steel new high strength balancing springs guaranteed up to 1000000 opening and closing operations and elliptical section bar with high wind-gust resistance
More comfortable and safety in programming an maintenance phases: the separate enclosures for electronics and mechanics protect internal parts from potential risks
Rapid and easy access: to the control unit located in the upper section of the barrier body. Simple fixture of the completely concealed photocells onto the specially designed seats on the barrier body. Simple fixture of the completely concealed photocells onto the specially designed seats on the barrier body.
More safety and reliability: obstacle detection and monitoring of motor absorption during automation movement automatic fault diagnostics during operation with consequent signalling of fault type through specific flash sequences. Provision for connection of latest generation optical and resistive sensitive edges.
Energy saving: the system sets to standby by when not in use to save consumption
Technical Specifications:
| Model | S-Bar |
| Electrical Data | |
| Power supply (V AC 5Hz) | 230 |
| Power supply (Vdc) | 24 |
| Absorption (A) | 1 |
| Power (W) | 300 |
| Performance Data | |
| Speed (m/s) | <4 |
| Torque (N) | 100 |
| Work cycle (cycles/day) | 100 |
| Dimensional and general data | |
| Protection Level (IP) | 44 |
| Working. Temp (°C Min/Max) | -20 / +50 |
| Dimensions (mm) | 330X180X1180 |
| Weight (kg) | 46 |
Product Support
@241/169
Description
Product Details
A Solar Power kit for NICE Products the kit contains the following components;
- 1 X Photovoltaic panel for 24V Supply
- 1 X 24V Battery Box
- Cables and connectors
Without the need for connections or excavations even in the more remote locations or those difficult to accesss with mains power the Solar Kit allows for operation even at night time thanks to the PSY24 (Battery Box) the extended energy reserves as well as low consumption of energy needed for operate NICE products allow for operation even in prolonged overcast conditions.
This product is compatible with the following;
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
@102/125
NICE TO5024 High Speed Swing Motor Dual Kit- Brilliant - for home automation
NICE TO5024 High Speed Swing Motor Dual Kit- Brilliant - for home automation
Description
The NICE TO5024 High Speed Swing Motor Dual Kit is engineered for intensive high-frequency gate automation in both residential and commercial settings. Designed to handle large gates up to 5 m per leaf with 2200 Nm of torque this kit delivers rapid 90° opening in just ~16 seconds offering high-speed performance safety and reliability.
This 24 V DC dual-motor system includes two TO5024HS gear motors with magnetic encoders ensuring smooth precise movement obstacle detection and compatibility with smart control units like MC824H. Whether you’re upgrading a private property a commercial site or an industrial entrance this high-speed swing gate kit delivers silent continuous-duty operation with minimal maintenance.
1. Key Features
Ultra-Fast Opening: Achieves 90° in approximately 16 seconds ideal for fast-access environments.
Heavy-Duty Performance: Operates gates up to 5 m and 400–500 kg per leaf supported by 2200 Nm torque for continuous-duty use.
Reliable & Silent: Patented internal component layout and bronze lead nut ensure quiet and long-lasting performance.
Smart Encoder Technology: 24 V DC motors with magnetic encoders for self-learning limit positions automatic fault diagnostics and obstacle detection with dual technology.
Large Accessible Wiring Compartment: Top-access connection area simplifies wiring inspection and maintenance.
Easy Installation & Maintenance: Built-in capacitor and full compatibility with Moby series brackets make retrofits effortless.
-
Fully Compatible Control Units:
TO5024 / TO5024I: Moonclever MC824H
TO5024: Mindy A3 A3F A6 A6F A60 A700F
Smart System Integration: Supports BlueBUS Solemyo solar kits and Opera system for advanced home automation.
User-Friendly Programming: One-button programming auto-learning travel limits pause-time setup and diagnostics make configuration simple.
Built to Last Outdoors: Aluminium IP44 housing withstands –20°C to +50°C conditions. Internals made of steel alloys and technopolymers resist corrosion and wear.
Advanced Safety Features: Anti-crush protection mechanical stops photocell support and manual release ensure safe operation.
2. Kit Contains
2 × TO5024HS Motors – Surface-mounted 24 V electromechanical gear motors with built-in Nice manual key release
2 × ON2 Transmitters – 433.92 MHz 2-channel remotes for reliable wireless access
1 × MC824H Control Unit – Advanced control panel with BlueBUS technology and intelligent motor management
1 × OXIBD Receiver – Plug-in radio receiver for seamless integration with Nice transmitters and accessories
3. Why Choose the NICE TO5024 High Speed Swing Motor Dual Kit?
- Ideal for Fast-Paced Environments – Reduces wait time with ultra-fast gate operation
- Engineered for Reliability – Built for continuous high-cycle usage (up to 95 cycles/hour)
- Seamless Integration – Compatible with a wide range of smart home automation systems
- Easy Setup & Maintenance – Spacious wiring box and simple programming features
4. Ideal For
- High-traffic residential driveways
- Apartment complexes and gated communities
- Commercial and industrial entrances
- Heavy or large swing gate systems requiring continuous operation
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
TO5024HSOZKIT2 |
Power Supply |
24 VDC |
Gate Speed (m/s) |
0.016 |
Torque |
2200 Nm |
Protection Level |
IP44 |
Operation temperature |
-20 – 50°C |
Weight |
7kg |
Dimensions (mm) |
965x115x105 |
@126/150
NICE TO5024 High Speed Swing Motor Single Kit – Brilliant - for home automation
NICE TO5024 High Speed Swing Motor Single Kit – Brilliant - for home automation
Description
NICE TO5024 High Speed Swing Motor Single Kit
Quick Overview
- New third generation models: quality and durability thanks to the housing made up of two tough aluminium shells with polyester paint finish; more resistant to atmospheric agents. Internal moving parts completely in steel light alloys and techno-polymers.
- Reliable and silent: patented layout or internal parts.
- Lead nut in bronze for strength and silent operation.
- Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor.
- Simple installation and maintenance with built-in capacitor.
- Total interchangeability with the series Moby: identical positions and fixing brackets.
- TO5024I ideal for intensive work load thanks to the torque of 2200 Nm can work on continuous duty on large sized gates.
- Recommended control units: Mindy A3 A3F A6 A6F A60 A700F; for TO5024 and TO5024I Moonclever MC824H.
-
24 Vdc version with magnetic encoder. Perfect for intensive use compatible with the control unit Moonclever MC824H equipped with BlueBUS and provision for operation with the systems Solemyo and Opera:
- simple programming by means of a single key
- self-learning of opening and closing limit positions
- automatic fault diagnostics
- obstacle detection with dual technology;
Kit Contains:
- TO5024HS – 1 surface-mounted electromechanical gear motors with Nice key release.
- ON2 – 2 transmitter 433.92 MHz 2 channels.
- MC824H – 1 control unit
- OXIBD – 1 plug-in receiver
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
TO5024HSOZKIT1 |
Power Supply |
24 VDC |
Gate Speed (m/s) |
0.016 |
Torque |
2200 Nm |
Protection Level |
IP44 |
Operation temperature |
-20 – 50°C |
Weight |
7kg |
Dimensions (mm) |
965x115x105 |
@75/110
Description
Quick Overview
- New third generation models: quality and durability thanks to the housing made up of two tough aluminium shells with polyester paint finish; more resistant to atmospheric agents. Internal moving parts completely in steel light alloys and techno-polymers.
- Reliable and silent: patented layout or internal parts.
- Lead nut in bronze for strength and silent operation.
- Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor.
- Simple installation and maintenance with built-in capacitor.
- Total interchangeability with the series Moby: identical positions and fixing brackets.
- TO5024I ideal for intensive work load thanks to the torque of 2200 Nm can work on continuous duty on large sized gates.
- Recommended control units: Mindy A3 A3F A6 A6F A60 A700F; for TO5024 and TO5024I Moonclever MC824H.
-
24 Vdc version with magnetic encoder. Perfect for intensive use compatible with the control unit Moonclever MC824H equipped with BlueBUS and provision for operation with the systems Solemyo and Opera:
- simple programming by means of a single key
- self-learning of opening and closing limit positions
- automatic fault diagnostics
- obstacle detection with dual technology;
Please note that this motor requires the MC824H Control unit which will be included in the kit. However this product comes up with motor only. If you would like to purchase the kit please refer to here. Kit Contains:
- TO5024 – 1 surface-mounted electromechanical gear motors with Nice key release.
- ON2 – 2 transmitter 433.92 MHz 2 channels.
- MC824H – 1 control unit
- OXIBD – 1 plug-in receiver
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
TO5024 |
Power Supply |
24 VDC |
Gate Speed (m/s) |
0.016 |
Torque |
2200 Nm |
Protection Level |
IP44 |
Operation temperature |
-20 – 50°C |
Weight |
7kg |
Dimensions (mm) |
965x115x105 |
@55/85