Sort by:
Description::
Enjoy uninterrupted voice and data connectivity on the move with CEL-FI ROAM R41 approved by Telstra Optus and Vodafone. Perfect for road trips boating adventures or fleet management this plug-and-play solution ensures seamless coverage replacing GO G31 systems with an instant boost in just minutes.
ROAM R41 boasts enterprise-grade performance combined with a user-friendly installation design making it incredibly easy to set up and power on. This compact solution keeps you connected wherever you sail. Its low-profile design enables discreet installation under any seat while its rugged frame ensures durability enhancing both productivity and safety for individuals and mobile devices alike.
Equipped with the cutting-edge 4th generation Nextivity IntelliBoost chip ROAM R41 features advanced technology utilized in our enterprise cellular coverage solutions. This chip delivers unparalleled signal gain guaranteeing that you can always make calls send texts enjoy your favourite music and stay on the right route while on the water. Offering reliable 3G 4G and 5G DSS connectivity the CEL-FI ROAM R41 is the ultimate solution to address poor coverage issues and enable dependable calling texting and streaming while on the move.
Setting up ROAM R41 is a breeze with its plug-and-play operation allowing you to improve connectivity in any boat ship or marine vessel within minutes.
FEATURES:
- Ideal for boosting mobile signal in boats.
- Support for 3G 4G and 5G DSS
- Suitable replacement for GO G31 Mobile
- Carrier switchable between Telstra Optus or Vodafone
- Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
- The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
- Ease of installation with plug-and-play operation
*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.
Supports 5G DSS on Telstra Optus and Vodafone
This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency.
The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon.
May not be available in all areas on all bands.
Specification:
| Frequency Bands | 1/3/5/7/8/20/26/28L |
| Relay Channel Bandwidths (MHz) | 5/10/15/20 |
| Networks | 3G/4G/5G |
| Network Protocols | WCDMA/LTE/DSS |
| Network Selection | Automatically (MyWave App set to “Following”) |
| Configured to authorized operator PLMN-IDs | |
| Duplex Modes | FDD |
| # of Relay Bands (MHz max.) | 1 |
| Relay Bandwidth (MHz max.) | 20 |
| Output Downlink Power (All Bands) (dBm max.) | 0 |
| Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.) | 22 |
| Output Uplink Power (Bands 1/3/7) (dBm max.) | 24 |
| System Gain (dBm max.) | 100 |
| Enterprise-Grade Echo Cancellation (dB min.) | 30 |
| Return Loss (dB typ.) | -8 |
@97/88
Description::
Improve Cellular Reception While on the Move with a User-friendly Solution that Ensures Reliable Signal Strength in your Car RV or Boat
The Cel-Fi R41 ROAM is a signal booster designed to enhance cellular coverage for mobile networks specifically catering to users in vehicles or areas with weak signal reception. It boosts 4G LTE and 5G signals to improve call quality and data speeds for a better mobile experience on the go.
Equipped with Nextivity's 4th generation IntelliBoost chip the ROAM R41 provides industry-leading signal amplification for reliable calls texts and streaming. This advanced technology supports 3G 4G and 5G DSS connectivity ensuring consistent coverage on the move. Whether on water in transit or in remote locations the ROAM R41 delivers dependable performance making it an ideal solution for improved mobile connectivity wherever you are.
Key features
- Boosts 4G/5G signal: Enhances network reliability for voice calls streaming and data services.
- Roaming Support: Optimized for mobile use ideal for those on the move.
- Compatible with major carriers: Ensures seamless compatibility with various networks.
- Easy installation: Simple setup process making it convenient for use in cars RVs and trucks.
- Coverage Area: Boosts coverage in weak signal areas to maintain connectivity even in remote locations.
- Carrier switchable: Approved by Telstra Optus or Vodafone
Pack includes
- Nextivity ROAM R41
- Poynting OMNI-493: Omni-Directional Marine 4G-5G antenna 617 to 3800 MHz
- PTL-240 Coaxial Cable: N Male to SMA Male 6M
*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24v vehicles
Supports 5G DSS on Telstra Optus and Vodafone
This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency.
The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon.
May not be available in all areas on all bands.
Specification:
| Frequency Bands | 1/3/5/7/8/20/26/28L |
| Relay Channel Bandwidths (MHz) | 5/10/15/20 |
| Networks | 3G/4G/5G |
| Network Protocols | WCDMA/LTE/DSS |
| Network Selection | Automatically (MyWave App set to “Following”) |
| Configured to authorized operator PLMN-IDs | |
| Duplex Modes | FDD |
| # of Relay Bands (MHz max.) | 1 |
| Relay Bandwidth (MHz max.) | 20 |
| Output Downlink Power (All Bands) (dBm max.) | 0 |
| Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.) | 22 |
| Output Uplink Power (Bands 1/3/7) (dBm max.) | 24 |
| System Gain (dBm max.) | 100 |
| Enterprise-Grade Echo Cancellation (dB min.) | 30 |
| Return Loss (dB typ.) | -8 |
@97/89
Description::
Unlock seamless connectivity on-the-go with CEL-FI ROAM R41 - approved by Telstra Optus and Vodafone. Tailored for nomadic use this plug-and-play solution guarantees uninterrupted voice and data transmission whether you're on a road trip boat adventure or managing a fleet. Say goodbye to coverage gaps with ROAM R41 replacing GO G31 systems for an instant boost in just minutes.
Please note: This product requires both a donor and server antenna to function. The donor antenna is sold separately.
R41 Features:
- Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
- Support for 3G 4G and 5G DSS
- Suitable replacement for CEL-FI GO G31 Mobile
- Carrier switchable between Telstra Optus or Vodafone
- Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
- The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
- Ease of installation with plug-and-play operation
The ROAM R41 boasts enterprise-grade performance combined with a user-friendly installation design making it incredibly easy to set up and power on. Regardless of whether you're in a car truck RV or boat this compact solution keeps you connected wherever you roam. Its low-profile design enables discreet installation under any seat while its rugged frame ensures durability enhancing both productivity and safety for individuals and mobile devices alike. Equipped with the cutting-edge 4th generation Nextivity IntelliBoost chip ROAM R41 features advanced technology utilized in our enterprise cellular coverage solutions. This chip delivers unparalleled signal gain guaranteeing that you can always make calls send texts enjoy your favourite music and stay on the right route while on the road or water. Offering reliable 3G 4G and 5G DSS connectivity within vehicles including fleet vehicles the CEL-FI ROAM R41 is the ultimate solution to address poor coverage issues and enable dependable calling texting and streaming while on the move. Setting up ROAM R41 is a breeze with its plug-and-play operation allowing you to improve connectivity in any car truck RV or boat within minutes.
Supports 5G DSS on Telstra Optus and Vodafone This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency. The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon. May not be available in all areas on all bands.
In the box
- CEL-Fi ROAM R41
- Automobile Auxiliary Power Adapter (CLA)
- Server Antenna
- Mounting Hardware
- Ground Cabling
*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.
RECOMMENDED DONOR ANTENNAS
- Pulse Larsen 4G Magnetic Antenna 698 to 2700 MHz SMA Male
- Blackhawk 4G Trucker Edge Antenna 698 to 2200 MHz SMA Male
- Blackhawk 4G Trucker Edge Compact Antenna 698 to 2200 MHz SMA Male
- Blackhawk 4G Trucker Mini Antenna 698 to 2700 MHz SMA Male
- GME AT4705BA 4G Spring-Mount Bullbar Antenna 700 to 2200 MHz 1200mm
- GME AT4704BA 4G Spring-Mount Bullbar Antenna 700 to 2200 MHz 508 mm
Specification:
| Frequency Bands | 1/3/5/7/8/20/26/28L |
| Relay Channel Bandwidths (MHz) | 5/10/15/20 |
| Networks | 3G/4G/5G |
| Network Protocols | WCDMA/LTE/DSS |
| Network Selection | Automatically (MyWave App set to “Following”) |
| Configured to authorized operator PLMN-IDs | |
| Duplex Modes | FDD |
| # of Relay Bands (MHz max.) | 1 |
| Relay Bandwidth (MHz max.) | 20 |
| Output Downlink Power (All Bands) (dBm max.) | 0 |
| Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.) | 22 |
| Output Uplink Power (Bands 1/3/7) (dBm max.) | 24 |
| System Gain (dBm max.) | 100 |
| Enterprise-Grade Echo Cancellation (dB min.) | 30 |
| Return Loss (dB typ.) | -8 |
@65/84
Description::
ROAM R41 boasts enterprise-grade performance combined with a user-friendly installation design making it incredibly easy to set up and power on. Regardless of whether you're in a car truck RV or boat this compact solution keeps you connected wherever you roam. Its low-profile design enables discreet installation under any seat while its rugged frame ensures durability enhancing both productivity and safety for individuals and mobile devices alike.
Equipped with the cutting-edge 4th generation Nextivity IntelliBoost chip ROAM R41 features advanced technology utilized in our enterprise cellular coverage solutions. This chip delivers unparalleled signal gain guaranteeing that you can always make calls send texts enjoy your favourite music and stay on the right route while on the road or water. Offering reliable 3G 4G and 5G DSS connectivity within vehicles including fleet vehicles the CEL-FI ROAM R41 is the ultimate solution to address poor coverage issues and enable dependable calling texting and streaming while on the move.
Setting up ROAM R41 is a breeze with its plug-and-play operation allowing you to improve connectivity in any car truck RV or boat within minutes.
FEATURES:
- Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
- Support for 3G 4G and 5G DSS
- Suitable replacement for GO G31 Mobile
- Carrier switchable between Telstra Optus or Vodafone
- Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
- The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
- Ease of installation with plug-and-play operation
Supports 5G DSS on Telstra Optus and Vodafone
This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency.
The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon.
May not be available in all areas on all bands.
Kit Includes:
- Nextivity Cel-Fi ROAM R41 Smart Mobile Repeater
- Blackhawk 4G Trucker Edge Compact Antenna 68cm 698 to 2200Mhz SMA Male
*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.
Specification:
| Frequency Bands | 1/3/5/7/8/20/26/28L |
| Relay Channel Bandwidths (MHz) | 5/10/15/20 |
| Networks | 3G/4G/5G |
| Network Protocols | WCDMA/LTE/DSS |
| Network Selection | Automatically (MyWave App set to “Following”) |
| Configured to authorized operator PLMN-IDs | |
| Duplex Modes | FDD |
| # of Relay Bands (MHz max.) | 1 |
| Relay Bandwidth (MHz max.) | 20 |
| Output Downlink Power (All Bands) (dBm max.) | 0 |
| Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.) | 22 |
| Output Uplink Power (Bands 1/3/7) (dBm max.) | 24 |
| System Gain (dBm max.) | 100 |
| Enterprise-Grade Echo Cancellation (dB min.) | 30 |
| Return Loss (dB typ.) | -8 |
@76/97
Description::
Unlock seamless connectivity on-the-go with CEL-FI ROAM R41 - approved by Telstra Optus and Vodafone.
Tailored for nomadic use this plug-and-play solution guarantees uninterrupted voice and data transmission whether you're on a road trip boat adventure or managing a fleet. Say goodbye to coverage gaps with ROAM R41 replacing GO G31 systems for an instant boost in just minutes.
ROAM R41 boasts enterprise-grade performance combined with a user-friendly installation design making it incredibly easy to set up and power on. This compact solution keeps you connected wherever you sail. Its low-profile design enables discreet installation under any seat while its rugged frame ensures durability enhancing both productivity and safety for individuals and mobile devices alike.
Equipped with the cutting-edge 4th generation Nextivity IntelliBoost chip ROAM R41 features advanced technology utilized in our enterprise cellular coverage solutions. This chip delivers unparalleled signal gain guaranteeing that you can always make calls send texts enjoy your favourite music and stay on the right route while on the water. Offering reliable 3G 4G and 5G DSS connectivity the CEL-FI ROAM R41 is the ultimate solution to address poor coverage issues and enable dependable calling texting and streaming while on the move.
Setting up ROAM R41 is a breeze with its plug-and-play operation allowing you to improve connectivity in any boat ship or marine vessel within minutes.
R41 Features:
- Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
- Support for 3G 4G and 5G DSS
- Suitable replacement for CEL-FI GO G31 Mobile
- Carrier switchable between Telstra Optus or Vodafone
- Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
- The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
- Ease of installation with plug-and-play operation
Supports 5G DSS on Telstra Optus and Vodafone
This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency. The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon. May not be available in all areas on all bands.
Kit Includes:
- Nextivity Cel-Fi ROAM R41 Smart Mobile Repeater
- Black hawk Trucker Edge Antenna Compact LITE Antenna 60cm
Specification:
| Frequency Bands | 1/3/5/7/8/20/26/28L |
| Relay Channel Bandwidths (MHz) | 5/10/15/20 |
| Networks | 3G/4G/5G |
| Network Protocols | WCDMA/LTE/DSS |
| Network Selection | Automatically (MyWave App set to “Following”) |
| Configured to authorized operator PLMN-IDs | |
| Duplex Modes | FDD |
| # of Relay Bands (MHz max.) | 1 |
| Relay Bandwidth (MHz max.) | 20 |
| Output Downlink Power (All Bands) (dBm max.) | 0 |
| Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.) | 22 |
| Output Uplink Power (Bands 1/3/7) (dBm max.) | 24 |
| System Gain (dBm max.) | 100 |
| Enterprise-Grade Echo Cancellation (dB min.) | 30 |
| Return Loss (dB typ.) | -8 |
@76/97
Description::
ROAM R41 boasts enterprise-grade performance combined with a user-friendly installation design making it incredibly easy to set up and power on. Regardless of whether you're in a car truck RV or boat this compact solution keeps you connected wherever you roam. Its low-profile design enables discreet installation under any seat while its rugged frame ensures durability enhancing both productivity and safety for individuals and mobile devices alike.
Equipped with the cutting-edge 4th generation Nextivity IntelliBoost chip ROAM R41 features advanced technology utilized in our enterprise cellular coverage solutions. This chip delivers unparalleled signal gain guaranteeing that you can always make calls send texts enjoy your favourite music and stay on the right route while on the road or water. Offering reliable 3G 4G and 5G DSS connectivity within vehicles including fleet vehicles the CEL-FI ROAM R41 is the ultimate solution to address poor coverage issues and enable dependable calling texting and streaming while on the move.
Setting up ROAM R41 is a breeze with its plug-and-play operation allowing you to improve connectivity in any car truck RV or boat within minutes.
FEATURES:
- Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
- Support for 3G 4G and 5G DSS
- Suitable replacement for GO G31 Mobile
- Carrier switchable between Telstra Optus or Vodafone
- Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
- The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
- Ease of installation with plug-and-play operation
Kit Includes:
- Nextivity Cel-Fi ROAM R41 Smart Mobile Repeater
- Blackhawk 4G Trucker Edge Antenna 95cm 698 to 2200Mhz SMA Male
*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.
Supports 5G DSS on Telstra Optus and Vodafone
This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency.
The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon.
May not be available in all areas on all bands.
How to install a CEL-FI ROAM R41 Mobile Signal Booster Trucker Edge Pack
Specification:
| Frequency Bands | 1/3/5/7/8/20/26/28L |
| Relay Channel Bandwidths (MHz) | 5/10/15/20 |
| Networks | 3G/4G/5G |
| Network Protocols | WCDMA/LTE/DSS |
| Network Selection | Automatically (MyWave App set to “Following”) |
| Configured to authorized operator PLMN-IDs | |
| Duplex Modes | FDD |
| # of Relay Bands (MHz max.) | 1 |
| Relay Bandwidth (MHz max.) | 20 |
| Output Downlink Power (All Bands) (dBm max.) | 0 |
| Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.) | 22 |
| Output Uplink Power (Bands 1/3/7) (dBm max.) | 24 |
| System Gain (dBm max.) | 100 |
| Enterprise-Grade Echo Cancellation (dB min.) | 30 |
| Return Loss (dB typ.) | -8 |
@69/89
Description::
ROAM R41 boasts enterprise-grade performance combined with a user-friendly installation design making it incredibly easy to set up and power on. Regardless of whether you're in a car truck RV or boat this compact solution keeps you connected wherever you roam. Its low-profile design enables discreet installation under any seat while its rugged frame ensures durability enhancing both productivity and safety for individuals and mobile devices alike.
Equipped with the cutting-edge 4th generation Nextivity IntelliBoost chip ROAM R41 features advanced technology utilized in our enterprise cellular coverage solutions. This chip delivers unparalleled signal gain guaranteeing that you can always make calls send texts enjoy your favourite music and stay on the right route while on the road or water. Offering reliable 3G 4G and 5G DSS connectivity within vehicles including fleet vehicles the CEL-FI ROAM R41 is the ultimate solution to address poor coverage issues and enable dependable calling texting and streaming while on the move.
Setting up ROAM R41 is a breeze with its plug-and-play operation allowing you to improve connectivity in any car truck RV or boat within minutes.
FEATURES:
- Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
- Support for 3G 4G and 5G DSS
- Suitable replacement for GO G31 Mobile
- Carrier switchable between Telstra Optus or Vodafone
- Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
- The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
- Ease of installation with plug-and-play operation
Kit Includes:
- Nextivity Cel-Fi ROAM R41 Smart Mobile Repeater
- Blackhawk 4G Trucker Mini 40cm 698 to 2700Mhz SMA Male
Supports 5G DSS on Telstra Optus and Vodafone
This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency.
The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon.
May not be available in all areas on all bands.
Specification:
| Frequency Bands | 1/3/5/7/8/20/26/28L |
| Relay Channel Bandwidths (MHz) | 5/10/15/20 |
| Networks | 3G/4G/5G |
| Network Protocols | WCDMA/LTE/DSS |
| Network Selection | Automatically (MyWave App set to “Following”) |
| Configured to authorized operator PLMN-IDs | |
| Duplex Modes | FDD |
| # of Relay Bands (MHz max.) | 1 |
| Relay Bandwidth (MHz max.) | 20 |
| Output Downlink Power (All Bands) (dBm max.) | 0 |
| Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.) | 22 |
| Output Uplink Power (Bands 1/3/7) (dBm max.) | 24 |
| System Gain (dBm max.) | 100 |
| Enterprise-Grade Echo Cancellation (dB min.) | 30 |
| Return Loss (dB typ.) | -8 |
@74/94
Nextivity CEL-FI ROAM R41 Zetifi 4G-5G Smart Antenna Vehicle Pack 1050mm
Nextivity CEL-FI ROAM R41 Zetifi 4G-5G Smart Antenna Vehicle Pack 1050mm
Description::
The Cel-Fi ROAM R41 just got smarter when used with the Zetifi 4G-5G Smart Antenna!
ROAM R41 boasts enterprise-grade performance combined with a user-friendly installation design making it incredibly easy to set up and power on. Regardless of whether you're in a car truck RV or boat this compact solution keeps you connected wherever you roam. Its low-profile design enables discreet installation under any seat while its rugged frame ensures durability enhancing both productivity and safety for individuals and mobile devices alike.
Comes with the Zetifi Smart Antenna representing a breakthrough in antenna technology with its location-aware variable gain system. This innovative antenna automatically switches between high and low gain modes to optimise performance based on real-time conditions. Utilising ZetiLink™ technology it dynamically adjusts gain by interpreting GPS data and antenna tilt ensuring the best possible signal reception in various environments.
Equipped with the cutting-edge 4th generation Nextivity IntelliBoost chip ROAM R41 features advanced technology utilized in our enterprise cellular coverage solutions. This chip delivers unparalleled signal gain guaranteeing that you can always make calls send texts enjoy your favourite music and stay on the right route while on the road or water. Offering reliable 3G 4G and 5G DSS connectivity within vehicles including fleet vehicles the CEL-FI ROAM R41 is the ultimate solution to address poor coverage issues and enable dependable calling texting and streaming while on the move.
Setting up ROAM R41 is a breeze with its plug-and-play operation allowing you to improve connectivity in any car truck RV or boat within minutes.
FEATURES:
- Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
- Support for 3G 4G and 5G DSS
- Suitable replacement for GO G31 Mobile
- Carrier switchable between Telstra Optus or Vodafone
- Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
- The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
- Ease of installation with plug-and-play operation
*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.
Supports 5G DSS on Telstra Optus and Vodafone
This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency.
The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon.
May not be available in all areas on all bands.
How to install a CEL-FI ROAM R41 Mobile Signal Booster Trucker Edge Pack
@100/91
Description::
Rugged precision-fit Hard Shell Case Designed for Maximum Protection and Portability
Nextivity Packaging - J11 Hard Shell Case for Compass 5G
Protect your Compass 5G device with this rugged hard shell case designed for durability and impact resistance. The J11 model ensures your equipment stays secure during transport and use with precision cuts for all necessary ports and features. Ideal for professionals on the go it combines sleek design with practical protection to enhance the performance of your Nextivity devices.
Key Features
- Durable Protection: Built to safeguard your Compass 5G from impacts drops and scratches.
- Precision Fit: Designed with custom cutouts to allow easy access to all ports and buttons.
- Compact & Lightweight: Provides strong protection without adding excessive bulk.
- Enhanced Mobility: Perfect for professionals needing to transport their device securely.
- Rugged Exterior: Hard shell design ensures the device stays safe during travel or storage.
@30/69
Description::
Nextivity’s ceiling mount accessory is the perfect solution to securely mount a QUATRA coverage unit (CU) on an indoor ceiling grid in plenum space whenever needed. This mounting bracket is designed for ease of use and is adjustable for standard ceiling tile sizes. It provides concealed ceiling mounting solutions for CUs in various indoor environments including offices schools hotels and retail spaces. The versatile accessory optimally supports both installing a single omnidirectional antenna for Active DAS in wide open areas and a multi-antenna Active DAS hybrid to provide coverage in multiple smaller wall-isolated areas using a single CU.
Features and benefits include:
- Standardise on a single bracket to be available whenever needed at a site with wide compatibility with CEL-FI QUATRA 4000(i/c/e) and QUATRA EVO class of coverage units
- Improved coverage unit installation concealment to allow strategic install location selection of CU as feasible and optimal for the site coverage.Compact form factor for aesthetically pleasing deployments
- Easy installation with bracket adjusted for ceiling grid tile size of the site
- Availability of mechanical features to flexibly allow positive reinforcement as local building regulations require.
Specification:
| Specifications | |
| Material | Powder Coated Aluminum |
| Color | White |
| Adjustability for Grid Size (in (mm)) | 22.64(575) to 23.31(592) |
| Compatibility | CEL-FI QUATRA 4000 class of CUs: • Q41-RECU • Q41-EECU • Q41-5ECU • I41-5ECU CEL-FI QUATRA EVO class of CUs • Q41-BXCU • Q41-EXCU-2 |
| Box Contents | 1x Ceiling Mount Bracket 4x M5 Screws 4x Washers 2x Coverage Unit Mount screws |
| Product Dimensions (in (mm)) | 24.25 x 11.97 x 1.10 (616 x 304 x 28) |
| Product Weight (lbs. (kg)) | 1.73 (0.79) |
| Shipping Dimensions (in (mm)) | 17.25 x 13.75 x 1.88 (438 x 349 x 48) |
| Shipping Weight (lbs. (kg)) | 2.56 (1.16) |
@16/39
NFC Metal or Carbon Fiber NTAG 216 ID card Internet Business card Digital Business card
$89.00
Unit price perNFC Metal or Carbon Fiber NTAG 216 ID card Internet Business card Digital Business card
$89.00
Unit price per
NTAG 216 have been developed by NXP® Semiconductors as standard NFC tag ICs to be used in mass-market applications such as retail, gaming, and consumer electronics, in combination with NFC devices or NFC-compliant Proximity Coupling Devices. NTAG 213, NTAG 215, and NTAG 216 (from now on, generally called NTAG 21x) are designed to fully comply to NFC Forum Type 2 Tag and ISO/IEC14443 Type A specifications.
Target applications include Out-of-Home and print media smart advertisement, SoLoMo applications, product authentication, NFC shelf labels, and mobile companion tags.
Target use cases include Out-of-Home smart advertisement, product authentication, mobile companion tags, Bluetooth® or Wi-Fi pairing, electronic shelf labels, and business cards. NTAG 21x memory can also be segmented to implement multiple applications simultaneously.
Thanks to the high input capacitance, NTAG 21x tag ICs are particularly tailored for applications requiring small footprints, without compromising on performance. Small NFC tags can be more easily embedded into, e.g., product labels or electronic devices.
The mechanical and electrical specifications of NTAG 21x are tailored to meet the requirements of inlay and tag manufacturers.
Contactless energy and data transfer
Communication to NTAG 21x can be established only when the IC is connected to an antenna.
When NTAG 21x is positioned in the RF field, the high-speed RF communication interface allows the transmission of the data with a baud rate of 106 kbit/s.
Simple deployment and user convenience
NTAG 21x offers specific features designed to improve integration and user convenience:
- The fast read capability allows scanning the complete NDEF message with only one FAST_READ command, thus reducing the overhead in high throughput production environments
- The improved RF performance allows for more flexibility in the choice of shape, dimension, and materials
- The option for 75 μm IC thickness enables the manufacturing of ultrathin tags, for a more convenient integration in, e.g., magazines or gaming cards
Security
- Manufacturer programmed 7-byte UID for each device
- Preprogrammed Capability container with one-time programmable bits
- Field programmable read-only locking function
- ECC-based originality signature
- 32-bit password protection to prevent unauthorized memory operations
NFC Forum Tag 2 Type compliance
NTAG 21x IC fully complies with the NFC Forum Tag 2 Type technical specification and enables NDEF data structure configurations.
Anti-collision
An intelligent anti-collision function allows operating more than one tag in the field simultaneously. The anti-collision algorithm selects each tag individually and ensures that the execution of a transaction with a selected tag is performed correctly without interference from another tag in the field.
Features
- Contactless transmission of data and supply energy
- Operating frequency of 13.56 MHz
- Data transfer of 106 kbit/s
- Data integrity of 16-bit CRC, parity, bit coding, bit counting
- Operating distance up to 100 mm (depending on various parameters as, e.g., field strength and antenna geometry)
- 7-byte serial number (cascade level 2 according to ISO/IEC 14443-3)
- UID ASCII mirror for automatic serialization of NDEF messages
- Automatic NFC counter triggered at a reading command
- NFC counter ASCII mirror for automatic adding the NFC counter value to the NDEF message
- ECC-based originality signature
- Fast read command
- True anti-collision
- 50 pF input capacitance
- 924 bytes organized in 231 pages with 4 bytes per page
- 888 bytes freely available user Read/Write area (222 pages)
- 4 bytes initialized capability container with one-time programmable access bits
- Field programmable read-only locking function per page for the first 16 pages
- Field programmable read-only locking function above the first 16 pages per 16 pages.
- Configurable password protection with an optional limit of unsuccessful attempts
- Anti-tearing support for capability container (CC) and lock bits
- ECC supported originality check
- Data retention time of 10 years
- Write endurance 100,000 cycles
Material: Carbon Fiber
Dimension: 85.5*54*0.8mm
Weight: 9 g
Material: stainless steel
Dimension: 85.5*54*0.8mm
Weight: 28g
* visit ibusinesscard . net for digital business card hosting
Description
NICE 24V Battery with Charger
Quick Overview
The NICE PS124 has a charger card integrated which you can connect to your gate motor. Hard wired the NICE battery charger is durable.
The 24V power supply integrated battery charger from NICE gate automation is a really good investment to run your NICE gate automation in case of a power outage.
The NICE PS124 battery with integrated charger can only be used with NICE gate automation and is guaranteed by the manufacturer for 30 months.
Nice PS124 24Vdc battery with integrated battery charger 30 months guarantee
Product Features
- Charger card
- Integrated in the motor unit
- Connected to the control logic
- Cable supplied
- Robustness
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
NICE 24V Battery with charger |
Type |
24V battery kit complete with battery charger for powering gates and automation systems in the event of mains power failure |
Storage battery life |
Estimated at 4 – 6 years |
Torque |
500 Nm |
Protection Level |
IP30 (to be used inside control units or gear motors or other protected environments |
Operation temperature |
-20 – 50°C |
Weight |
1.450 kg |
Dimensions (mm) |
104 x 53 x 143 mm |
@16/38
Description
Nice MC824H Moonclever Control Unit
Control Panel For Nice 24 Vdc gear motors for automatic swing gates.
Control unit compatible with the Solemyo solar power system and Opera system for management programming and diagnostics of automations also remotely.
Equipped with Nice BlueBUS technology.
A latest generation model housed in a newly designed box compatible with the Opera system.
24 Vdc version with magnetic encoder and microprocessor logic.
Safe and reliable.
Intelligent: on start-up indicator to confirm correct power supply and efficient operation of the control unit; automatic fault diagnostics and signalling via the flashing light
and confirmation leds.
Guaranteed savings and respect for the environment.
Nice MC824H Moonclever Control Unit Installation couldn’t be simpler thanks to the system BlueBUS enabling connection of the control unit motors and accessories by means of just two wires.
@52/82
Description
Quick Overview
BiDi WiFi is a handy tool of the latest generation designed for installer.
With BiDi-WiFi and the MyNice Pro App the installation configuration procedures are simple and effective. All automation programming phases can also be carried out while sitting comfortably in your vehicle which you can always carry with you to facilitate the Nice automation configuration procedures.
Simple pocket-sized plug-in interface compatible with all Nice automations for gates and garage doors with Bus-T4 connector.
The BiDi-WiFi interface once connected automatically generates a WiFi network which allows the configuration of the automation via the MyNice Pro app.
Guided procedures via wizard with description of the parameters displayed as per the instruction manual. The search function allows you to easily find the desired programming parameter to complete the installation.
Dedicated management cloud. List of installers overview of interventions geolocation via map and statistics can be consulted easily guaranteeing a quick and efficient service by reducing response times to its customers.
To go to the manufacturer’s website click >>
@9/27
Description
Overview
Nice Era EDSB keypad with 12 key digital selector strong metal body and Nice BlueBUS technology.
Compatible with Nice MOU and O-Box for easy programming.
Product Features
- 12 key digital selector the combination is a 1 to 9 digit number
- Backlit keypad
- Recessed or Surface mount
- Strong and durable design
- Vandal-resistant metal body
- 27mm depth
- 2 Programming modes: Easy or Professional
- 255 storable combinations expandable on EDS and EDSI up to 510 combinations with a second additional memory BM1000
- With an O-Box interface you can manage the programming of the BM1000
- Also available with Nice BlueBUS technology
- Wireless option available
Nice BlueBUS:
Allows easy connection to the control unit of all devices simply by using only two wires.
2 keys for activating different commands out of a total of 6 configurable options (ie open close step operation etc) depending on what control unit is used.
Can be used in mixed configuration with up to 4 control devices (EDSB / EDSIB and ETPB)
Potential for adding a block / unblock function
Compatibility:
The EDSB keypad is compatible with
- EDSIB Keypads
- ETPB Proxy Reader
- MOU Handheld Interface
- O-Box Interface
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
The digital selector 12 Keys for outdoor Bluebus Nice EDSB |
Power Supply |
Via BlueBus |
Power Consumption |
1.5 units BlueBus |
Installation |
Surface |
Protection Level |
IP44 |
Operating temperature |
Ambient temperature of 20°C ± 5°C |
Weight (kg) |
0.16 |
Dimensions (mm) |
70 x 66 + 13 x 70 h |
@19/43
Description
Overview
The new Nice Era Inn Edge S Li-ion is a tubular motor designed for automatic sunshades. The motor powered by a lithium-ion battery can automatically fold and unfold sunshades without the need for in-wall cabling. It achieves best-in-class uniform hem bar alignment performance using inbuilt patented RF technology ensuring that every battery-powered Nice tubular motor put in a project receives the command signal to open and close at the same moment. As a result with a simple touch of a button on a Nice remote or a smartphone app your automated sunshades will open and close simultaneously.
With the built-in variable speed technology you can also modify the Nice tubular motors to run at different times according on the installation height ensuring that your sunshades open
Tubular motor with electronic limit switch practical dry contact input and built-in radio receiver for interior blinds. For shafts from 35 mm with obstacle detection and Soft Start and Soft Stop functions.
Product Description
- Minimum vibrations and extremely high level of quitness during operation for the highest acoustic comfort. Noise 35 dBA.
- Tubular motor rotation speed is constant in all load conditions thus guaranteeing for installations with multiple blinds perfect alignment between all blinds when opening and closing.
- Possibility to set the up and down movement times.
- Possibility to activate the obstacle detection function both while opening and closing.
- Adjustable speed for opening and closing.
- The practical dry contact input allows Era Inn Edge tubular motors to be connected to any system featuring dry contact technology available on the market.
- Each motor can be programmed individually without needing to power off the other motors in the same system.
Via a wireless connection using Nice transmitters. Via a wired connection using the TTPRO palmtop programmer. - Soft Start and Soft Stop functions electronically controlled allow to set different levels of acceleration and deceleration in approach to the limit switches.
- Easy programming and diagnostic thanks to the feedback of the two-colour LED.
- Precise and quick limit switch adjustment using two pushbuttons located on the motor head.
- Low power consumption both during operation and in stand-by.
- Practical cable with connector: 1.5 m long which simplifies installation and maintenance operations.
- Extended operation without the risk of overheating.
Compatibility:
Applications: Roller blinds Venetian blinds Roman blinds Pleated blinds Projection screens
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
@33/63
Description
Product Features
European or standard cylinders are interchangeable.
Burglar-resistant metal shell.
Electrical contacts and levers are protected by plastic containers.
Employable as a direct motor command in applications with a mains power source (230 Vac).
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
NICE Era Key Switch |
Box Content |
1 key switch
2 keys
fixings
instructions
|
Protection Level |
IP44 |
Weight (kg) |
0.55 |
Dimensions (mm) |
120x50x80 |
@8/26
Description
Quick Overview
Simply perfect installations. Synchronized photocells are horizontally adjustable through 210 degrees and 30 degrees vertically with Nice BlueBUS technology.
The new 210-degree solution: The beam of the Nice F210 and F210B photocells has a horizontal scope of 210 degree thereby increasing the safety level of the system and simplifying installation.
* F210B can only be connected to ‘BlueBUS’ networks.
Numerous models and countless advantages: The new photocells are available with relay output (F210) or with the Nice BlueBUS technology (F210B). With the BlueBus technology all devices can be easily connected to the control unit with just two wires.
Cutting-edge technology: The problem of interference between the sensors and the automatic synchronization between several pairs of photocells is solved by the anti-blinding circuit; high range adjustable on 2 levels; synchronizing circuit; alignment with proportional LED for easy and safe installation.
Suitable for any architectural environment and easy to install.
Resilient and safe: Polycarbonate casing; FA1 vandal-proof metal shell (optional).
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical specifications
| Connection Type | Bus Wiring |
| IP Rating | 44 |
| Range | 10m |
| Power Supply | 12-24V AC/DC |
| Weight (kg) | 0.28 |
| Dimension (mm) | 45x46x128 |
@18/41