Sort by:
Description
Quick Overview
For the gearmotors of average power. Attached to the door with self-drilling screws. Recommended especially for galvanized gates where spacers can not be welded without destroying corrosion protection. 1m sections facilitate easy mounting on the gate.
The set includes:
- 1m rack section
- 4 steel washers with screws
Technical Specifications
Product Name |
NICE 6 Rack Down 1m long |
Gate Support |
maximum 500 kg |
Weight |
3kg |
Dimensions (mm) |
25x20x1000 |
@5/22
Description
NICE RUN1200HS Motor Kit
Quick Overview
User-friendly: thanks to the Nice BlueBUS technology the control unit can be connected to up to seven couples of photocells control security and signalling devices using two wires only.
Practical: the control unit and PS524 battery charger can be connected by means of a simple connector and can be housed directly inside the motor.
Advanced: the temperature sensor adapts the motor power to the climatic conditions and at the same time thermal cut-out. A master/slave selection automatically synchronises two motors. This means it is possible to automate 2-leaf sliding gates set opposite each other.
Intelligent: thanks to the obstacle detection system and automatic programming of the working times. Self-diagnosis by means of a flashing light. 8 programming levels.
Safe: acceleration and deceleration can be adjusted at the beginning and at the end of each opening and closing manoeuvre.
Sturdy: base and release in pressure die cast with easy to open handle.
Very quiet: gear motor on bearings.
The kits include:
- 1 x RUN1200HS Hi-speed electro-mechanical gear motor (24v)
- 1 x RUA6 Integrated Control Unit
- 2 x ON2E Transmitters
- 1 x EPMB Pair of BlueBUS Photocells
- 1 x OXI Receiver
Product Support
Manuals:
⇒ Nice RUN400HS / RUN1200HS Manual
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
RUN1200HS |
Battery Backup Option |
Yes |
Gate Speed (m/sec) |
0.37 |
Torque |
500 Nm |
Protection Level |
IP44 |
Operation temperature |
-20 – 50°C |
Weight |
8kg |
Dimensions (mm) |
330x195x277 |
@113/137
Description
Quick Overview
Strength and reliability: robust structure in steel new high strength balancing springs guaranteed up to 1000000 opening and closing operations and elliptical section bar with high wind-gust resistance
More comfortable and safety in programming an maintenance phases: the separate enclosures for electronics and mechanics protect internal parts from potential risks
Rapid and easy access: to the control unit located in the upper section of the barrier body. Simple fixture of the completely concealed photocells onto the specially designed seats on the barrier body. Simple fixture of the completely concealed photocells onto the specially designed seats on the barrier body.
More safety and reliability: obstacle detection and monitoring of motor absorption during automation movement automatic fault diagnostics during operation with consequent signalling of fault type through specific flash sequences. Provision for connection of latest generation optical and resistive sensitive edges.
Energy saving: the system sets to standby by when not in use to save consumption
Technical Specifications:
| Model | S-Bar |
| Electrical Data | |
| Power supply (V AC 5Hz) | 230 |
| Power supply (Vdc) | 24 |
| Absorption (A) | 1 |
| Power (W) | 300 |
| Performance Data | |
| Speed (m/s) | <4 |
| Torque (N) | 100 |
| Work cycle (cycles/day) | 100 |
| Dimensional and general data | |
| Protection Level (IP) | 44 |
| Working. Temp (°C Min/Max) | -20 / +50 |
| Dimensions (mm) | 330X180X1180 |
| Weight (kg) | 46 |
Product Support
@241/169
Description
Product Details
A Solar Power kit for NICE Products the kit contains the following components;
- 1 X Photovoltaic panel for 24V Supply
- 1 X 24V Battery Box
- Cables and connectors
Without the need for connections or excavations even in the more remote locations or those difficult to accesss with mains power the Solar Kit allows for operation even at night time thanks to the PSY24 (Battery Box) the extended energy reserves as well as low consumption of energy needed for operate NICE products allow for operation even in prolonged overcast conditions.
This product is compatible with the following;
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
@102/125
NICE TO5024 High Speed Swing Motor Dual Kit- Brilliant - for home automation
NICE TO5024 High Speed Swing Motor Dual Kit- Brilliant - for home automation
Description
The NICE TO5024 High Speed Swing Motor Dual Kit is engineered for intensive high-frequency gate automation in both residential and commercial settings. Designed to handle large gates up to 5 m per leaf with 2200 Nm of torque this kit delivers rapid 90° opening in just ~16 seconds offering high-speed performance safety and reliability.
This 24 V DC dual-motor system includes two TO5024HS gear motors with magnetic encoders ensuring smooth precise movement obstacle detection and compatibility with smart control units like MC824H. Whether you’re upgrading a private property a commercial site or an industrial entrance this high-speed swing gate kit delivers silent continuous-duty operation with minimal maintenance.
1. Key Features
Ultra-Fast Opening: Achieves 90° in approximately 16 seconds ideal for fast-access environments.
Heavy-Duty Performance: Operates gates up to 5 m and 400–500 kg per leaf supported by 2200 Nm torque for continuous-duty use.
Reliable & Silent: Patented internal component layout and bronze lead nut ensure quiet and long-lasting performance.
Smart Encoder Technology: 24 V DC motors with magnetic encoders for self-learning limit positions automatic fault diagnostics and obstacle detection with dual technology.
Large Accessible Wiring Compartment: Top-access connection area simplifies wiring inspection and maintenance.
Easy Installation & Maintenance: Built-in capacitor and full compatibility with Moby series brackets make retrofits effortless.
-
Fully Compatible Control Units:
TO5024 / TO5024I: Moonclever MC824H
TO5024: Mindy A3 A3F A6 A6F A60 A700F
Smart System Integration: Supports BlueBUS Solemyo solar kits and Opera system for advanced home automation.
User-Friendly Programming: One-button programming auto-learning travel limits pause-time setup and diagnostics make configuration simple.
Built to Last Outdoors: Aluminium IP44 housing withstands –20°C to +50°C conditions. Internals made of steel alloys and technopolymers resist corrosion and wear.
Advanced Safety Features: Anti-crush protection mechanical stops photocell support and manual release ensure safe operation.
2. Kit Contains
2 × TO5024HS Motors – Surface-mounted 24 V electromechanical gear motors with built-in Nice manual key release
2 × ON2 Transmitters – 433.92 MHz 2-channel remotes for reliable wireless access
1 × MC824H Control Unit – Advanced control panel with BlueBUS technology and intelligent motor management
1 × OXIBD Receiver – Plug-in radio receiver for seamless integration with Nice transmitters and accessories
3. Why Choose the NICE TO5024 High Speed Swing Motor Dual Kit?
- Ideal for Fast-Paced Environments – Reduces wait time with ultra-fast gate operation
- Engineered for Reliability – Built for continuous high-cycle usage (up to 95 cycles/hour)
- Seamless Integration – Compatible with a wide range of smart home automation systems
- Easy Setup & Maintenance – Spacious wiring box and simple programming features
4. Ideal For
- High-traffic residential driveways
- Apartment complexes and gated communities
- Commercial and industrial entrances
- Heavy or large swing gate systems requiring continuous operation
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
TO5024HSOZKIT2 |
Power Supply |
24 VDC |
Gate Speed (m/s) |
0.016 |
Torque |
2200 Nm |
Protection Level |
IP44 |
Operation temperature |
-20 – 50°C |
Weight |
7kg |
Dimensions (mm) |
965x115x105 |
@126/150
NICE TO5024 High Speed Swing Motor Single Kit – Brilliant - for home automation
NICE TO5024 High Speed Swing Motor Single Kit – Brilliant - for home automation
Description
NICE TO5024 High Speed Swing Motor Single Kit
Quick Overview
- New third generation models: quality and durability thanks to the housing made up of two tough aluminium shells with polyester paint finish; more resistant to atmospheric agents. Internal moving parts completely in steel light alloys and techno-polymers.
- Reliable and silent: patented layout or internal parts.
- Lead nut in bronze for strength and silent operation.
- Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor.
- Simple installation and maintenance with built-in capacitor.
- Total interchangeability with the series Moby: identical positions and fixing brackets.
- TO5024I ideal for intensive work load thanks to the torque of 2200 Nm can work on continuous duty on large sized gates.
- Recommended control units: Mindy A3 A3F A6 A6F A60 A700F; for TO5024 and TO5024I Moonclever MC824H.
-
24 Vdc version with magnetic encoder. Perfect for intensive use compatible with the control unit Moonclever MC824H equipped with BlueBUS and provision for operation with the systems Solemyo and Opera:
- simple programming by means of a single key
- self-learning of opening and closing limit positions
- automatic fault diagnostics
- obstacle detection with dual technology;
Kit Contains:
- TO5024HS – 1 surface-mounted electromechanical gear motors with Nice key release.
- ON2 – 2 transmitter 433.92 MHz 2 channels.
- MC824H – 1 control unit
- OXIBD – 1 plug-in receiver
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
TO5024HSOZKIT1 |
Power Supply |
24 VDC |
Gate Speed (m/s) |
0.016 |
Torque |
2200 Nm |
Protection Level |
IP44 |
Operation temperature |
-20 – 50°C |
Weight |
7kg |
Dimensions (mm) |
965x115x105 |
@75/110
Description
Quick Overview
- New third generation models: quality and durability thanks to the housing made up of two tough aluminium shells with polyester paint finish; more resistant to atmospheric agents. Internal moving parts completely in steel light alloys and techno-polymers.
- Reliable and silent: patented layout or internal parts.
- Lead nut in bronze for strength and silent operation.
- Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor.
- Simple installation and maintenance with built-in capacitor.
- Total interchangeability with the series Moby: identical positions and fixing brackets.
- TO5024I ideal for intensive work load thanks to the torque of 2200 Nm can work on continuous duty on large sized gates.
- Recommended control units: Mindy A3 A3F A6 A6F A60 A700F; for TO5024 and TO5024I Moonclever MC824H.
-
24 Vdc version with magnetic encoder. Perfect for intensive use compatible with the control unit Moonclever MC824H equipped with BlueBUS and provision for operation with the systems Solemyo and Opera:
- simple programming by means of a single key
- self-learning of opening and closing limit positions
- automatic fault diagnostics
- obstacle detection with dual technology;
Please note that this motor requires the MC824H Control unit which will be included in the kit. However this product comes up with motor only. If you would like to purchase the kit please refer to here. Kit Contains:
- TO5024 – 1 surface-mounted electromechanical gear motors with Nice key release.
- ON2 – 2 transmitter 433.92 MHz 2 channels.
- MC824H – 1 control unit
- OXIBD – 1 plug-in receiver
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
TO5024 |
Power Supply |
24 VDC |
Gate Speed (m/s) |
0.016 |
Torque |
2200 Nm |
Protection Level |
IP44 |
Operation temperature |
-20 – 50°C |
Weight |
7kg |
Dimensions (mm) |
965x115x105 |
@55/85
Description
NICE TO5024 Swing Motor Single Kit
Quick Overview
- New third generation models: quality and durability thanks to the housing made up of two tough aluminium shells with polyester paint finish; more resistant to atmospheric agents. Internal moving parts completely in steel light alloys and techno-polymers.
- Reliable and silent: patented layout or internal parts.
- Lead nut in bronze for strength and silent operation.
- Generously sized and practical connection compartment: rapid and easy access from above to internal parts located in the upper section of the motor.
- Simple installation and maintenance with built-in capacitor.
- Total interchangeability with the series Moby: identical positions and fixing brackets.
- TO5024I ideal for intensive work load thanks to the torque of 2200 Nm can work on continuous duty on large sized gates.
- Recommended control units: Mindy A3 A3F A6 A6F A60 A700F; for TO5024 and TO5024I Moonclever MC824H.
-
24 Vdc version with magnetic encoder. Perfect for intensive use compatible with the control unit Moonclever MC824H equipped with BlueBUS and provision for operation with the systems Solemyo and Opera:
- simple programming by means of a single key
- self-learning of opening and closing limit positions
- automatic fault diagnostics
- obstacle detection with dual technology;
Kit Contains:
- TO502 – 1 surface-mounted electromechanical gear motors with Nice key release.
- ON2 – 2 transmitter 433.92 MHz 2 channels.
- MC824H – 1 control unit
- OXIBD – 1 plug-in receiver
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
TO5024OZKIT1 |
Power Supply |
24 VDC |
Gate Speed (m/s) |
0.016 |
Torque |
2200 Nm |
Protection Level |
IP44 |
Operation temperature |
-20 – 50°C |
Weight |
7kg |
Dimensions (mm) |
965x115x105 |
@69/103
Description
Product Details
Low voltage power pack to prevent the need to run mains power all the way to your gate system.
- NICE Enclosure
- 24V / 250VA Transformer
- Plug & Lead
- Cable gland
Cable to use:
- 1-15m = 1.5mm
- 16-25m = 3.0mm
- 26-35m = 4.0mm
- 36 -50m = 6.0mm
Useful Tip:
- Use underground rated cable for long term relaiblity.
- Put in conduit or some type of protection if possible.
@31/60
Description
Nice Yubii Home Pro – Fibaro Home Center 3 Replacement Smart Home Hub
Yubii Home Pro – Advanced Smart Home Automation Hub
The Nice Yubii Home Pro (formerly known as the FIBARO Home Center 3) is the ultimate smart home gateway designed to be the central controller—or “brain”—of your smart home system. It seamlessly connects and manages all your compatible smart devices providing full control and automation via the intuitive Yubii App accessible from anywhere in the world. It delivers the same core features as its predecessor with enhanced flexibility and future-proof integration into the Nice smart home ecosystem.
As the foundation of the Nice Smart Home Ecosystem Yubii Home Pro enables powerful automation and device integration combining lighting climate security and more into a single intelligent platform. With advanced security increased reliability and broad compatibility this gateway is built for long-term performance and scalability.
Simple to set up and configure the Yubii Home Pro is ideal for both DIY users and professionals.
Whether you’re starting a new Z-Wave smart home or upgrading from an older controller the Yubii Home Pro provides a secure future-ready platform to manage all your devices in one place.
Why Choose Yubii Home Pro?
Powerful and Secure Smart Home Hub – Built to manage all your smart devices from lighting and blinds to climate and access control. Wide Compatibility – Supports Z-Wave (500 series) Wi-Fi (2.4GHz & 5GHz) and Nice protocols (FLOR OPERA PLN2+). Wireless Operation – No internet cable required — runs over Wi-Fi for flexible installation. User-Friendly Interface – Easily create scenes manage automations and control devices through the modern Yubii App. Compatible with Z-Wave Plus Certified Devices – Works with most Z-Wave smart home devices from major brands. Future-Proofed Platform – Enhanced support for advanced apps drivers and integrations.
Want to Save Time? Try Our Pre-Configuration Service!
Setting up your smart home has never been easier.
With our Pre-Configuration Service we’ll fully configure your Yubii Home Pro and any compatible devices purchased from us — ready to go straight out of the box. Simply install them at your location and you’re all set to enjoy your smart home.
Note: Yubii Home Pro devices and Pre-Configuration Service must be purchased in the same order.
Yubii Home Pro is the next-generation Fibaro HC3 alternative offering all the power flexibility and user-friendly tools you need to create a smarter safer and more efficient home.
- Communication: Z-Wave WiFi Zigbee NICE and Elero radio protocol
- Compatible with over 3 000 third-party devices
- Simultaneous control of over 200 devices
- Compatible with Apple Watch
- Advanced information protection and data security
- The Yubii Home Pro control panel is a reliable and an efficient heart that manages a smart home.
Provides simultaneous control over over 200 devices and allows you to create customized scenarios in various fields.
Yubii Home Pro controls all elements of the FIBARO system and others compatible devices (over 3000 devices of various brands) with support Zigbee protocol can support an unlimited number of IP cameras plugins and application
Communication with the headquarters takes place via:
- Z-Wave protocol
- WiFi
- NICE radio protocol
- Elero radio protocol
- Zidbee Protocol
- Ethernet cable
-
Nice Yubii Home Pro – The Smart Home Hub for Complete Automation
Looking for the ultimate smart home controller? The Yubii Home Pro is a powerful hub that connects and controls your entire smart home ecosystem. Formerly known as the Fibaro Home Center 3 this advanced gateway is at the heart of the Nice Smart Home platform—offering seamless integration reliable automation and intuitive remote access via the Yubii App from anywhere in the world. -
Digital Home Systems – Yubii Home Pro
FIBARO Home Center 3 System
Quick Overview
Home Center 3 is the latest smart home management controller from Fibaro Group. Advanced technology within its components guarantees the highest stability and performance of the FIBARO System.
Z-Wave chip 500 brings an exceptional number of hundreds of integrations with other brands products which you can use while controlling electronics and household appliances lighting blinds HVAC alarm monitoring or watering system – with just a single button gesture or word.
PRODUCT HIGHLIGHTS
- Cutting-edge speed & stability
- 4×1 2GHz processor 2 GB RAM of memory
- Seamless integration with over 2000 third-party products operating in various technologies
- Fast configuration process
- Simple and complex automation like: Block Scenes LUA events Quick Apps
- Unquestionable triple data security system
- Future-proof – lasts for years maintaining top performance
- Ingenious and refined design.
Product Details
Please see the full presentation here.
Additional protocols will be enabled later this year:
ZigBee: 2405-2480MHz
Wi-Fi: 802.11 b/g/n/a/ac
433MHz: 433.54-433.92 MHz (OOK FSK GFSK)
Bluetooth: Low Energy 2402-2480MHz
For light users we also provide a smaller less expensive system the FIBARO Home Center Lite.
Product Support
Manuals:
⇒ Fibaro Home Center 3 User Manual
⇒ Fibaro Home Center 3 and HVAC solution for VRV systems
Videos / Youtube:
⇒ Fibaro Home Center 3 Youtube Presentation
Technical Specifications
RF Protocol |
Z‐Wave (ZigBee Wi-Fi 433MHz later this year) |
RF Frequency |
921.42Mhz ‐ AU/NZ approved RF for Z‐wave |
Z‐Wave device type |
Controller |
Processor |
Quad-core Arm Cortex A53 (1.2GHz) |
Power |
12VDC with 240V AC adapter |
Hardware |
RAM 2GB LPDDR3
8GB eMMC
|
Operation Range |
Up to 30m indoors with no obstacles |
Application |
Indoor use only |
Operation Temperature |
-10 ~ +40 °C |
Storage Temperature |
-10 ~ 70 °C humidity 5~75% RH (max) |
Weight |
1.1 kg |
Housing |
Aluminium |
Compliance |
C-Tick RCM |
@71/106

