Sort by:
Description
NICE 24V Battery with Charger
Quick Overview
The NICE PS124 has a charger card integrated which you can connect to your gate motor. Hard wired the NICE battery charger is durable.
The 24V power supply integrated battery charger from NICE gate automation is a really good investment to run your NICE gate automation in case of a power outage.
The NICE PS124 battery with integrated charger can only be used with NICE gate automation and is guaranteed by the manufacturer for 30 months.
Nice PS124 24Vdc battery with integrated battery charger 30 months guarantee
Product Features
- Charger card
- Integrated in the motor unit
- Connected to the control logic
- Cable supplied
- Robustness
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
NICE 24V Battery with charger |
Type |
24V battery kit complete with battery charger for powering gates and automation systems in the event of mains power failure |
Storage battery life |
Estimated at 4 – 6 years |
Torque |
500 Nm |
Protection Level |
IP30 (to be used inside control units or gear motors or other protected environments |
Operation temperature |
-20 – 50°C |
Weight |
1.450 kg |
Dimensions (mm) |
104 x 53 x 143 mm |
@16/38
Description
Nice MC824H Moonclever Control Unit
Control Panel For Nice 24 Vdc gear motors for automatic swing gates.
Control unit compatible with the Solemyo solar power system and Opera system for management programming and diagnostics of automations also remotely.
Equipped with Nice BlueBUS technology.
A latest generation model housed in a newly designed box compatible with the Opera system.
24 Vdc version with magnetic encoder and microprocessor logic.
Safe and reliable.
Intelligent: on start-up indicator to confirm correct power supply and efficient operation of the control unit; automatic fault diagnostics and signalling via the flashing light
and confirmation leds.
Guaranteed savings and respect for the environment.
Nice MC824H Moonclever Control Unit Installation couldn’t be simpler thanks to the system BlueBUS enabling connection of the control unit motors and accessories by means of just two wires.
@52/82
Description
Quick Overview
BiDi WiFi is a handy tool of the latest generation designed for installer.
With BiDi-WiFi and the MyNice Pro App the installation configuration procedures are simple and effective. All automation programming phases can also be carried out while sitting comfortably in your vehicle which you can always carry with you to facilitate the Nice automation configuration procedures.
Simple pocket-sized plug-in interface compatible with all Nice automations for gates and garage doors with Bus-T4 connector.
The BiDi-WiFi interface once connected automatically generates a WiFi network which allows the configuration of the automation via the MyNice Pro app.
Guided procedures via wizard with description of the parameters displayed as per the instruction manual. The search function allows you to easily find the desired programming parameter to complete the installation.
Dedicated management cloud. List of installers overview of interventions geolocation via map and statistics can be consulted easily guaranteeing a quick and efficient service by reducing response times to its customers.
To go to the manufacturer’s website click >>
@9/27
Description
Overview
Nice Era EDSB keypad with 12 key digital selector strong metal body and Nice BlueBUS technology.
Compatible with Nice MOU and O-Box for easy programming.
Product Features
- 12 key digital selector the combination is a 1 to 9 digit number
- Backlit keypad
- Recessed or Surface mount
- Strong and durable design
- Vandal-resistant metal body
- 27mm depth
- 2 Programming modes: Easy or Professional
- 255 storable combinations expandable on EDS and EDSI up to 510 combinations with a second additional memory BM1000
- With an O-Box interface you can manage the programming of the BM1000
- Also available with Nice BlueBUS technology
- Wireless option available
Nice BlueBUS:
Allows easy connection to the control unit of all devices simply by using only two wires.
2 keys for activating different commands out of a total of 6 configurable options (ie open close step operation etc) depending on what control unit is used.
Can be used in mixed configuration with up to 4 control devices (EDSB / EDSIB and ETPB)
Potential for adding a block / unblock function
Compatibility:
The EDSB keypad is compatible with
- EDSIB Keypads
- ETPB Proxy Reader
- MOU Handheld Interface
- O-Box Interface
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
The digital selector 12 Keys for outdoor Bluebus Nice EDSB |
Power Supply |
Via BlueBus |
Power Consumption |
1.5 units BlueBus |
Installation |
Surface |
Protection Level |
IP44 |
Operating temperature |
Ambient temperature of 20°C ± 5°C |
Weight (kg) |
0.16 |
Dimensions (mm) |
70 x 66 + 13 x 70 h |
@19/43
Description
Overview
The new Nice Era Inn Edge S Li-ion is a tubular motor designed for automatic sunshades. The motor powered by a lithium-ion battery can automatically fold and unfold sunshades without the need for in-wall cabling. It achieves best-in-class uniform hem bar alignment performance using inbuilt patented RF technology ensuring that every battery-powered Nice tubular motor put in a project receives the command signal to open and close at the same moment. As a result with a simple touch of a button on a Nice remote or a smartphone app your automated sunshades will open and close simultaneously.
With the built-in variable speed technology you can also modify the Nice tubular motors to run at different times according on the installation height ensuring that your sunshades open
Tubular motor with electronic limit switch practical dry contact input and built-in radio receiver for interior blinds. For shafts from 35 mm with obstacle detection and Soft Start and Soft Stop functions.
Product Description
- Minimum vibrations and extremely high level of quitness during operation for the highest acoustic comfort. Noise 35 dBA.
- Tubular motor rotation speed is constant in all load conditions thus guaranteeing for installations with multiple blinds perfect alignment between all blinds when opening and closing.
- Possibility to set the up and down movement times.
- Possibility to activate the obstacle detection function both while opening and closing.
- Adjustable speed for opening and closing.
- The practical dry contact input allows Era Inn Edge tubular motors to be connected to any system featuring dry contact technology available on the market.
- Each motor can be programmed individually without needing to power off the other motors in the same system.
Via a wireless connection using Nice transmitters. Via a wired connection using the TTPRO palmtop programmer. - Soft Start and Soft Stop functions electronically controlled allow to set different levels of acceleration and deceleration in approach to the limit switches.
- Easy programming and diagnostic thanks to the feedback of the two-colour LED.
- Precise and quick limit switch adjustment using two pushbuttons located on the motor head.
- Low power consumption both during operation and in stand-by.
- Practical cable with connector: 1.5 m long which simplifies installation and maintenance operations.
- Extended operation without the risk of overheating.
Compatibility:
Applications: Roller blinds Venetian blinds Roman blinds Pleated blinds Projection screens
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
@33/63
Description
Product Features
European or standard cylinders are interchangeable.
Burglar-resistant metal shell.
Electrical contacts and levers are protected by plastic containers.
Employable as a direct motor command in applications with a mains power source (230 Vac).
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
NICE Era Key Switch |
Box Content |
1 key switch
2 keys
fixings
instructions
|
Protection Level |
IP44 |
Weight (kg) |
0.55 |
Dimensions (mm) |
120x50x80 |
@8/26
Description
Quick Overview
Simply perfect installations. Synchronized photocells are horizontally adjustable through 210 degrees and 30 degrees vertically with Nice BlueBUS technology.
The new 210-degree solution: The beam of the Nice F210 and F210B photocells has a horizontal scope of 210 degree thereby increasing the safety level of the system and simplifying installation.
* F210B can only be connected to ‘BlueBUS’ networks.
Numerous models and countless advantages: The new photocells are available with relay output (F210) or with the Nice BlueBUS technology (F210B). With the BlueBus technology all devices can be easily connected to the control unit with just two wires.
Cutting-edge technology: The problem of interference between the sensors and the automatic synchronization between several pairs of photocells is solved by the anti-blinding circuit; high range adjustable on 2 levels; synchronizing circuit; alignment with proportional LED for easy and safe installation.
Suitable for any architectural environment and easy to install.
Resilient and safe: Polycarbonate casing; FA1 vandal-proof metal shell (optional).
Product Support
⇒ Please see full range of NICE gates and garage door openers here
Technical specifications
| Connection Type | Bus Wiring |
| IP Rating | 44 |
| Range | 10m |
| Power Supply | 12-24V AC/DC |
| Weight (kg) | 0.28 |
| Dimension (mm) | 45x46x128 |
@18/41
Nice FTA1 battery kit for FT210 / FT210B photocells - for home automation
Nice FTA1 battery kit for FT210 / FT210B photocells - for home automation
Description
7Ah battery kit for FT210/FT210B transmitters for intensive use
@8/27
Description
Quick Overview
- IBT4N is an interface device that enables the connection of the Oview programming unit to the Nice control unit fitted with an”IBT4N” programming connector that implemented the Opera system.
- BT4N enables connection of the programming unit Oview to a control unit or to a number of automation.
- IBT4N is activated only when it is connected to the control unit by means of the ”IBT4N” connector on the unit as it is powered by the connector.
Caution!
- Do not fit IBT4N in positions other than those specified.
- Before connecting IBT4N disconnect the power to the control unit.
- After the connection turn on the power supply.
To go to the manufacturer’s website click >>
@8/27
Description
Quick Overview
We are excited to announce the new colorful line of 2-channel transmitters by Nice Apollo! At just 1.2″ x 2.2″ the miniature Inti transmitter will fit in your purse car or hand with ease. The Inti gate opener remote uses data processing and recognition systems that increase its degree of security delivering a threefold reduction in automation response time. This makes for faster opening and closing times allowing you to get where you need fast!
Do you find programming your remotes and transmitters frustrating? Thanks to the Inti enabling code exchange you can easily program your transmitter using a transmitter already programmed to your receiver. This black 433.92 MHz rolling code transmitter manages Identity Codes and Certificates and has a self-learning and built-in proximity receiver. With 72 bit O-Code encoding it is also compatible with Nice FLOR encoding receivers.
Available in six colors and ideal for multi-user systems you are sure to find the right transmitter to fit your personal style. The back side features a scratch-resistant coating a perk that also makes our Inti remote control an elegant colorful keyring!
Technical Specifications
Carrier Frequency |
433.92 MHz |
Power Supply |
3 VDC Lithium battery type CR2032 |
Estimated Range |
Outdoors: 150 m Inside Building: 30 m |
Encoding |
O-Code 72 bit rolling code |
Protection Level |
IP40 |
Operation temperature |
-20 – 50°C |
Weight (kg) |
0.015 |
Dimensions (mm) |
55 x 30 x 60 |
@8/26
Description
Quick Overview
MC824HR is an electronic control unit for automating swing gates. MC824HR is able to command electromechanical actuators of the type indicated in “Table 4” (Please refer to the user and installation manual below). It incorporates a system that verifies the force of the motors connected to it (amperometric function). This system allows for automatically detecting the limit switches memorising the work time of each individual motor and detecting any obstacles during normal movement. These characteristics simplify the installation considerably as the leaf offset and work times do not require any adjusting.
Product Support
Manuals:
⇒ Please see full range of NICE gates and garage door openers here
Technical Specifications
Product Name |
MC824HR |
Power Supply |
MC824HR control unit: 230 Va ± 10% 50–60 Hz MC824HR/V1 control unit: 120 Va ± 10% 50–60 Hz |
Protection Level |
IP54 with container intact |
Operation temperature |
-20 – 55°C |
Weight |
4.1 kg |
Dimensions (mm) |
310 x232x122 |
@51/80
Description
Quick Overview
This Nice shockproof is used with NICE WAY remote controls to protect them from garden humidity and shocks.
It comes in a small elegant design which makes it practical and ergonomic.
This shockproof holder comes in a white shock proof rubber case to protect the transmitting module. NICE table shockproof holder is fully directional and provides greater reception.
This Nice shockproof is functional appealing and highly adapted for residential use.
Technical Specifications
@4/20
Description
Quick Overview
Enjoy a high level of comfort with this model. Indeed this accessory enables you to efficiently operate your gates garage doors blinds or roller shutters. This model stands out for its simple and unique design. The case and the way in which the buttons are placed make it an original and extremely elegant gadget. Not to mention its refined finishing touches. This model is also extremely easy to use and to programme requiring no specific tools.
To find out more about this model feel free to browse the user manual below. This of course includes all the information required for the model’s use. Moreover the programming text details all the steps to follow when setting up the model making it very easy for you.
Technical Specifications
@3/20
Description
Quick Overview
Communication: One-Way And Two-Way Radio Communication
Compatibility: “O-Code” “FloR” “TTS” “Smilo” And “Flo” One-Way Radio Encoding Systems And With The “BD” Two-Way Encoding System.
Identification: Known as the “Certificate”. This allows for accessing several operations
Automation: Automatically recognizes the characteristics of the control unit on which it is installed and self-sets in the
following way: If the control unit manages the “BusT4” the receiver makes available up o 15 different commands. If the control unit DOES NOT manage the “BusT4” the receiver makes available up to 4 different commands.
Technical Specifications
| Product Name | Two-way receiver OXIBD |
Reception frequency |
433.92 MHz |
Transmission frequency |
433.82 MHz |
Sensitivity |
– 108 dBm |
Encoding |
O-Code 72 bit rolling code |
Absorption |
50 mA (maximum) |
Operation temperature |
-20 – 55°C |
Weight (kg) |
0.022 |
Dimensions (mm) |
49.5×41.9×18 |
@13/34
NICE Paired Wireless Photocell Adjustable FT210 - for home automation
NICE Paired Wireless Photocell Adjustable FT210 - for home automation
Description
NICE Paired Wireless Photocell Adjustable FT210
Quick Overview
The 210° solution
The beam of the Nice FT210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell. The FT210 photocells are available with relay output.
FT210B can only be connected to ‘BlueBUS’ networks.
Numerous models and countless advantages: The new photocells are available with relay output (FT210) or with the Nice BlueBUS technology (FT210B). With the BlueBus technology all devices can be easily connected to the control unit with just two wires.
Resilient and safe
Polycarbonate casing; FA1 vandal-proof metal shell (optional).
Cutting-edge technology: The problem of interference between the sensors and the automatic synchronisation between several pairs of photocells is solved by the anti-blinding circuit; high range adjustable on 2 levels; synchronising circuit; alignment with proportional LED for easy and safe installation.
@17/40
NICE Paired Wireless Photocell FT210B – Brilliant - for home automation
NICE Paired Wireless Photocell FT210B – Brilliant - for home automation
Description
NICE Paired Wireless Photocell FT210B
Quick Overview
The 210° solution
The beam of the Nice FT210 photocells has a horizontal scope of 210° thereby increasing the safety level of the system and simplifying installation: the gate or garage door to be automated quite often slide flush with the wall making it very difficult to position the photocell. The FT210 photocells are available with relay output.
FT210B can only be connected to ‘BlueBUS’ networks.
Numerous models and countless advantages: The new photocells are available with relay output (FT210) or with the Nice BlueBUS technology (FT210B). With the BlueBus technology all devices can be easily connected to the control unit with just two wires.
Resilient and safe
Polycarbonate casing; FA1 vandal-proof metal shell (optional).
Cutting-edge technology: The problem of interference between the sensors and the automatic synchronisation between several pairs of photocells is solved by the anti-blinding circuit; high range adjustable on 2 levels; synchronising circuit; alignment with proportional LED for easy and safe installation.
@20/44
Description
Quick Overview
Pro-View is a unique programming tool of the latest generation designed for the installer. Thanks to its multiple functions Pro-View allows the professional to operate in complete comfort facilitating the management of installation configuration and maintenance operations of Nice automations in the Gate & Door line for gates barriers and garage doors.
Installation is even simpler and more comfortable: with Pro-View and the MyNice Pro App the installation configuration procedures are simple and effective and can be carried out in all phases of automation programming in comfort via your smartphone.
The MyNice Pro app makes the installer’s work easier: with the new app the installer has a series of tools available that make operations immediate. A simple wizard helps programming the automations a short description for each parameter simplifies the configuration procedure and the search function makes to easy find the parameter needed to program to complete the installation.
Better maintenance interventions: the Nice technology recognizes the Gate&Door automation control unit you are working on allowing you to check and update the firmware read the relevant manual and access all the parameters with the search function.
No need to move to reach customers: if the customer calls to replace the remote control or to add one it is possible to access the customer’s installation database remove the previous remote control and associate the new one. All from the comfort of the office.
With Nice Cloud everything you need is always under control: in the dedicated Nice Cloud space the entire company can be managed and monitored from a single dashboard. List of installers geolocation of customers in the geographical map overview of interventions and statistics can be easily consulted by accessing your space increasing efficiency and reducing response times.
More service and closer to the professional thanks to Nice Pro-View and MyNice Pro App!
@38/71
Description
NICE Rack 6 Down 1m long
Quick Overview
For the gearmotors of average power. Attached to the door with self-drilling screws. Recommended especially for galvanized gates where spacers can not be welded without destroying corrosion protection. 1m sections facilitate easy mounting on the gate.
The set includes:
- 1m rack section
- 4 steel washers with screws
Technical Specifications
Product Name |
NICE 6 Rack Down 1m long |
Gate Support |
maximum 500 kg |
Weight |
3kg |
Dimensions (mm) |
25x20x1000 |
@5/22