Nextivity

Nextivity CEL-FI GO G51 Building LPDA Pack inc. Wall Mount

~~$2,699.95~~ $2,697.96

Boost 4G/5G signal with the Nextivity CEL-FI GO G51 ideal for enhancing coverage in large homes and medium businesses. Enjoy faster reliable connectivity.

Description::

The Nextivity CEL-FI GO G51 is a powerful 4G/5G signal booster designed to improve cellular coverage in large residential and medium-sized commercial spaces. Suited to urban areas where a 5G 3500 signal is available to take advantage of 5G data speeds and increased user capacity.

The G51 also supports 4G LTE data speeds so you can enjoy fast internet connectivity even in areas with weak signals. Plus with its easy-to-install design and compact size the G51 is a convenient solution that won’t take up much space in your home or office.

If you’re tired of dropped calls slow data speeds and unreliable cellular coverage the Nextivity G51 is a great investment. With its advanced signal-boosting technology and broad carrier compatibility it’s sure to improve your cellular experience and keep you connected when you need it most.

FEATURES:

Relays two channels simultaneously:
1st Relay Channel: 5G 3500 (100MHz)
2nd Relay Channel: one 3G or 4G band (5/10/15/20MHz)
Carrier Switching using WAVE App between Telstra or Optus – one carrier at a time (Vodafone approval pending)
Up to 3000 m2 coverage area
Voice and Data support on 4G/5G
Suited for those in a 5G 3500 coverage area (G41 is more suitable for areas outside of a 5G 3500 coverage area as it supports 2 x 4G band relay)
Powered by the latest 4th generation Nextivity proprietary IntelliBoost chip delivering industry-leading and unconditionally network safe performance
Establishes network-safe uplink power in real-time and automatic uplink muting when no active user equipment is detected
Ethernet Port for remote monitoring and management with Nextivity WAVE Portal and WAVE App

Ideal for Boosting Mobile Signal in:

Large Homes
Single or Multi-Level Commercial Buildings
Government Buildings
Medical and Nursing Homes
Infill 5G coverage for Hotels/Shopping Centres/Hospitals/Conference Centres
Underground Parking
Factories and Manufacturing
Warehouses and Logistics

PACK INCLUDES:

Nextivity CEL-FI GO G51 Stationary Repeater - Switchable between Telstra Optus and Vodafone (Pending approval) - (one carrier at a time)
Wall Mount 698-4000MHz Panel Antenna -150dBc PIM
LPDA Antenna 698-4000MHz
PTL-240 10m + 6m Coaxial Cable N male to SMA Male
1m Ethernet cable
240v Power Supply

Specification: Specifications Table

Specifications
Frequency Bands	n78 and 1/3/5/7/8/20/28L
Relay Channel Bandwidths (MHz)	100 and 5/10/15/20
Networks	2G/3G/4G/5G
Network Protocols	GSM/WCDMA/LTE/DSS/NR
Network Selection	Automatically best available (WAVE App and WAVE Portal for manual setting)
Network Operator	Configured to authorized operator PLMN-IDs
Duplex Modes	FDD and TDD
# of Relay Bands (max.)	2
Relay Bandwidth (MHz max.)	100 + 20
Output Downlink Power (Bands 1/3/5/7/8/20/28L) (dBm max.)	20 (16 in U.K.)
Output Downlink Power (Band n78) (dBm max.)	27
Output Uplink Power (Band n78) (dBm max.)	24
Output Uplink Power (Bands 1/3/7) (dBm max.)	22
Output Uplink Power (Bands 5/8/20/28L) (dBm max.)	20
System Gain (dB max.)	100
Enterprise-Grade Echo Cancellation (dB min.)	30
Return Loss (dB typ.)	-8
Impedance (Ω nom.)	50

@185/142

Nextivity CEL-FI GO G51 Stationary Repeater

~~$2,355.95~~ $2,352.96

The CEL-FI GO G51 Repeater boosts 5G connectivity indoors ensuring superior signal strength for 2G 3G 4G and 5G networks in medium spaces.

Description::

The Nextivity CEL-FI GO G51 Stationary Repeater (G51–LE–003) is a high-performance cellular coverage solution designed to bring the power of the 5G network indoors. With dual-band support and industry-leading signal gain of up to 100 dB it ensures superior coverage for 2G 3G 4G and 5G networks in small to medium-sized buildings.

Key Features:

Supports 2G 3G 4G and 5G networks with automatic selection
n78 1 3 5 7 8 20 and 28L frequency bands
Up to 100 dB signal gain
27 dBm downlink power (Band n78)
22 dBm uplink power
Self-configuring with remote management
Compact design
Passive convection
IP20-rated

Optimised for 5G NR Mid-Band

This repeater provides extensive 5G NR coverage in the mid-band (3.5 GHz) ideal for overcoming the range limitations of 5G in urban environments. It supports dual-band relay for 2G/3G/4G and 5G offering reliable connectivity across multiple networks including GSM WCDMA LTE and NR protocols.

Seamless Network Integration

Powered by Nextivity's latest IntelliBoost chip the GO G51 integrates with existing cellular networks without requiring manual configuration. It supports both FDD and TDD duplex modes ensuring compatibility with a wide range of carriers and enhancing coverage with automatic network selection for the best available signal.

Remote Monitoring and Management

With the Nextivity WAVE Portal and WAVE App users can easily monitor and manage the performance of the GO G51 remotely. This provides real-time insights and management options to ensure optimal system performance reducing maintenance and setup time.

Flexible Power and Connectivity Options

The GO G51 is equipped with multiple connectivity interfaces including SMA connectors for donor and server ports LAN for remote management and Bluetooth for easy setup via the WAVE App. The system is powered by a 60W AC adapter with flexible cable options for various regions.

Durable and Environmentally Safe

Designed for indoor use the GO G51 features a rugged build with an IP20 rating providing protection from environmental factors such as dust and humidity. The repeater operates efficiently in temperatures ranging from 0 °C to 40 °C with passive convection cooling to maintain optimal performance.

Compliance and Certifications

The CEL-FI GO G51 is compliant with 3GPP standards (Release 13 and 17) CE RED ErP and RoHS3 certifications ensuring safety and quality across global markets. It also meets ACMA and OFCOM standards making it an ideal solution for enterprise use in EMEA and APAC regions.

Specification:

Category	Specification	Details
Model Version	G51–LE–003	CEL-FI GO G51 Stationary Repeater
Frequency Bands	n78 and 1/3/5/7/8/28L	Supports 5G NR and legacy bands
Network Compatibility	2G/3G/4G/5G	GSM/WCDMA/LTE/NR
Relay Channel Bandwidths	100 MHz and 5/10/15/20 MHz	Wide coverage for multiple bands
Output Power (Downlink)	20 dBm (16 in U.K.)	Bands 1/3/5/7/8/28L
	27 dBm	Band n78
Output Power (Uplink)	22 dBm	Bands 1/3/7
	20 dBm	Bands 5/8/20/28L
System Gain	100 dB max	Industry-leading signal gain
Operating Temperature	0 to 40 °C	Indoor use only
Ingress Protection	IP20	Indoor only non-waterproof
Dimensions	265.2 x 172.0 x 69.2 mm	Main Unit Dimensions
Weight	2.2 kg	Main Unit Weight
Power Supply	12V DC 60W max	Type I (AUS)
Connectivity	SMA (f) ports	For donor and server antennas
Management	WAVE App & Portal	Bluetooth LAN system status LEDs

@161/125

Nextivity Cel-Fi PRO Vodafone 3G/4G Repeater -Ex Demo

~~$1,106.95~~ $1,104.96

Boost your mobile signal and improve coverage with this powerful 3G/4G repeater offering reliable connectivity and easy monitoring with app compatibility.

Description::

Improve Signal Strength and Reduce Connectivity Issues in your Area

Boost your mobile network experience with the Nextivity Cel-Fi PRO 3G/4G Repeater a cutting-edge solution designed to enhance coverage and improve signal strength. Perfect for homes offices or remote areas this powerful repeater amplifies Vodafone's 3G and 4G signals ensuring stable high-speed mobile connectivity in locations with poor or no reception.

Note: This is an EX-DEMO unit. While the unit has been previously used for demonstration purposes it is in excellent condition and fully functional. The unit may show minor signs of use.

Key Features

Vodafone-Compatible: Optimised for use with the Vodafone 3G/4G network providing seamless integration and superior performance.
Supported Bands: 1 3 7 8 for enhanced network compatibility.
Wave Application: for easy registration real-time monitoring and diagnostics.
Wide Coverage Area: Capable of covering large areas with enhanced signal strength making it ideal for homes offices and even rural properties.
Plug-and-Play: Easy installation with a straightforward setup requiring minimal technical expertise.
Smart Signal Boosting: Utilises advanced technology to intelligently boost signals without interference maintaining a clear and strong connection.
Reliable and Durable: Built for long-lasting performance in various environments the Cel-Fi PRO repeater offers consistent and reliable service.

Whether you're in a rural area a basement or simply suffer from poor Vodafone reception the Cel-Fi PRO Vodafone 3G/4G Repeater offers the ideal solution for better mobile coverage and improved connectivity. Experience uninterrupted calls and fast data speeds with ease.

Specification:

Nextivity Cel-Fi PRO Vodafone 1/3/7/8 - Specifications
Specification	Details
Product Model	Nextivity Cel-Fi PRO
Supported Bands	1 3 7 8
Network Compatibility	3G/4G LTE
Coverage Area	Up to 1000m² (depending on environment)
Installation	Plug-and-play
Power Supply	100-240V AC
Wave Application	For registration monitoring and diagnostics
Dimensions	200mm x 150mm x 45mm
Weight	1.2 kg

@76/97

Nextivity CEL-FI Quatra Antenna Mount - Plastic

~~$70.95~~ $68.96

Nextivity CEL-FI Quatra Wideband "Panel" MIMO Antenna

~~$190.95~~ $187.96

The Nextivity CEL-FI Quatra Wideband MIMO Antenna enhances cellular coverage with a wide frequency range durable design and easy installation.

Description::

The Nextivity CEL-FI Quatra Wideband "Panel" MIMO Antenna (A52-X12-100) is engineered for exceptional performance in enhancing cellular coverage. This dual-polarisation LTE MIMO antenna is perfect for both indoor and outdoor installations allowing for flexible mounting options on walls ceilings or poles.

Key Features:

Dual-polarisation LTE MIMO antenna
698–960 MHz and 1710–2700 MHz Frequency Ranges
Designed for DAS applications
Up to 9.0 dBi Gain
Low VSWR
Low-profile housing.
Supports DC grounding for lightning protection

Wide Frequency Range

Designed to operate within the frequency ranges of 698–960 MHz and 1710–2700 MHz this antenna provides optimised coverage for Distributed Antenna Systems (DAS) applications. Its wideband capabilities ensure seamless connectivity across various cellular networks accommodating the needs of diverse users.

Advanced Features

The CEL-FI Quatra Wideband antenna features a low Voltage Standing Wave Ratio (VSWR) of ≤2.0 ensuring minimal signal reflection and improved efficiency. With a gain of up to 9.0 dBi it is highly effective in capturing and transmitting signals significantly enhancing your cellular experience.

Durable Design

Constructed with high-quality materials including a UV-stabilised ABS radome and brass/PCB reflector this antenna is built to withstand harsh environmental conditions. It operates efficiently across a temperature range of -40 °C to +65 °C ensuring reliable performance in various climates.

Lightning Protection

Safety is paramount with the CEL-FI Quatra antenna as it comes equipped with DC grounding for lightning protection. This feature safeguards the antenna and connected devices from potential electrical surges making it a secure choice for outdoor installations.

User-Friendly Installation

The design of the CEL-FI Quatra antenna facilitates easy installation. Whether mounted on a wall ceiling or pole the aesthetic low-profile housing blends seamlessly into any environment providing both functionality and visual appeal.

Compatibility and Applications

This antenna is ideal for use with Nextivity’s Antenna Positioning application optimising off-air donor signal delivery or directing coverage from the Coverage Unit (CU) for the Cel-Fi QUATRA 1000 and QUATRA 2000 systems. Experience improved cellular connectivity with a product designed to meet modern communication needs.

Specification:

Category	Specification	Details
Product	Model Number	A52-X12-100
Type	Antenna Type	Wideband MIMO Panel Antenna
Frequency Range	Operating Frequencies	698–960 MHz 1710–2700 MHz
Gain	Gain (dBi)	6.5 (698–864 MHz) 7.0 (870–960 MHz) 8.5 (1710–1880 MHz) 9.0 (1920–2170 MHz) 8.0 (2200–2500 MHz) 7.5 (2490–2700 MHz)
VSWR	Voltage Standing Wave Ratio	≤2.0 (698–960 MHz) ≤1.8 (1710–2700 MHz)
Polarisation	Type	±45° Dual Polarisation
Isolation	Total	23 dB
Beamwidth	Horizontal Beamwidth	78° to 60°
	Vertical Beamwidth	70° to 55°/75°
Input Impedance	Impedance	50 ohm
Max Power	Maximum Power	100W (698–960 MHz) 50W (1710–2700 MHz)
Connector	Type	QMA-Male (A52-X12-100)
Dimensions	Size	315 × 195 × 68 mm
Weight	Net Weight	0.95 kg
Materials	Reflector Material	Brass and PCB
	Radome Material	ABS (UV Stabilised)
Operating Temperature	Temperature Range	-40 °C to +65 °C

@14/34

Nextivity CEL-FI R41 Small Building LPDA Pack inc. Ceiling Dome

~~$1,433.95~~ $1,430.96

Enhance mobile connectivity on-the-go with Nextivity's CEL-FI ROAM R41 Smart Mobile Repeater. Approved by Telstra Optus and Vodafone. Boosts 3G 4G and 5G DSS signals effortlessly.

Description::

Now approved by Telstra Optus and Vodafone

Introducing the Nextivity CEL-FI R41 a small building LPDA solution that guarantees robust voice and data connectivity. Certified by Telstra Optus and Vodafone this plug-and-play system is perfect for ensuring continuous communication within small buildings. Designed to amplify signals for 3G 4G and 5G DSS it eliminates coverage gaps in commercial and residential spaces. Enjoy the convenience of carrier flexibility and easy installation with this innovative system.

The CEL-FI R41 is an enterprise-level solution repurposed for smaller-scale use offering exceptional performance in an easy-to-install package. It's ideal for any small building environment ensuring consistent and reliable connectivity. The device's compact design allows for unobtrusive placement within any interior while its durable build promises long-lasting service.

The advanced Nextivity IntelliBoost chip ensures that the CEL-FI R41 provides significant signal enhancement so you can enjoy uninterrupted calls seamless streaming and reliable data services. With CEL-FI R41 dropped calls and poor data speeds are a thing of the past even in areas with traditionally weak signal coverage.

Simple to set up the CEL-FI R41 ensures that improved connectivity in small buildings is just minutes away.

Supports 5G DSS which integrates 4G and 5G frequencies for optimal performance.
The WAVE App will not indicate a 5G boost; however devices will show a boosted 5G signal.
Availability may vary based on location and network bands.

Features:

Perfect for enhancing mobile signal in small offices retail spaces homes and outbuildings.
Compatible with 3G 4G and 5G DSS networks.
A practical alternative to the GO G31 Mobile solution.
Switchable between Telstra Optus or Vodafone networks with updates manageable via the WAVE App.
Covers a comprehensive range of frequencies including 700L/850/900/1800/2100/2600 + Band 20 & 26.
Features the latest 4th generation Nextivity IntelliBoost chip for precise and powerful signal amplification.
Simple and quick plug-and-play installation.

Advertised coverage of up to 200 square meters perfectly suited for the living room dining area and kitchen in a standard-sized home.

*Actual coverage varies based on cellular signal strength antenna isolation and the layout and materials of interior walls.

Specification:

Frequency Bands	1/3/5/7/8/20/26/28L
Relay Channel Bandwidths (MHz)	5/10/15/20
Networks	3G/4G/5G
Network Protocols	WCDMA/LTE/DSS
Network Selection	Automatically (MyWave App set to “Following”)
Configured to authorized operator PLMN-IDs
Duplex Modes	FDD
# of Relay Bands (MHz max.)	1
Relay Bandwidth (MHz max.)	20
Output Downlink Power (All Bands) (dBm max.)	0
Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.)	22
Output Uplink Power (Bands 1/3/7) (dBm max.)	24
System Gain (dBm max.)	100
Enterprise-Grade Echo Cancellation (dB min.)	30
Return Loss (dB typ.)	-8

@98/89

Nextivity CEL-FI R41 Small Building LPDA Pack inc. Wall Mount

~~$1,307.95~~ $1,305.96

Nextivity CEL-FI ROAM R41 4WD GME AT4704BA Pack

~~$1,163.95~~ $1,160.96

Enhance mobile connectivity on-the-go with Nextivity's CEL-FI ROAM R41 Smart Mobile Repeater. Approved by Telstra Optus and Vodafone. Boosts 3G 4G and 5G DSS signals effortlessly.

Description::

ROAM R41 boasts enterprise-grade performance combined with a user-friendly installation design making it incredibly easy to set up and power on. Regardless of whether you're in a car truck RV or boat this compact solution keeps you connected wherever you roam. Its low-profile design enables discreet installation under any seat while its rugged frame ensures durability enhancing both productivity and safety for individuals and mobile devices alike.

Equipped with the cutting-edge 4th generation Nextivity IntelliBoost chip ROAM R41 features advanced technology utilized in our enterprise cellular coverage solutions. This chip delivers unparalleled signal gain guaranteeing that you can always make calls send texts enjoy your favourite music and stay on the right route while on the road or water. Offering reliable 3G 4G and 5G DSS connectivity within vehicles including fleet vehicles the CEL-FI ROAM R41 is the ultimate solution to address poor coverage issues and enable dependable calling texting and streaming while on the move.

Setting up ROAM R41 is a breeze with its plug-and-play operation allowing you to improve connectivity in any car truck RV or boat within minutes.

FEATURES:

Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
Support for 3G 4G and 5G DSS
Suitable replacement for GO G31 Mobile
Carrier switchable between Telstra Optus or Vodafone
Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
Ease of installation with plug-and-play operation

Supports 5G DSS on Telstra Optus and Vodafone
This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency.
The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon.
May not be available in all areas on all bands.

*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.

Specification:

Frequency Bands	1/3/5/7/8/20/26/28L
Relay Channel Bandwidths (MHz)	5/10/15/20
Networks	3G/4G/5G
Network Protocols	WCDMA/LTE/DSS
Network Selection	Automatically (MyWave App set to “Following”)
Configured to authorized operator PLMN-IDs
Duplex Modes	FDD
# of Relay Bands (MHz max.)	1
Relay Bandwidth (MHz max.)	20
Output Downlink Power (All Bands) (dBm max.)	0
Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.)	22
Output Uplink Power (Bands 1/3/7) (dBm max.)	24
System Gain (dBm max.)	100
Enterprise-Grade Echo Cancellation (dB min.)	30
Return Loss (dB typ.)	-8

@80/74

Nextivity CEL-FI ROAM R41 4WD GME AT4705BA Pack

~~$1,180.95~~ $1,177.96

Enhance mobile connectivity on-the-go with Nextivity's CEL-FI ROAM R41 Smart Mobile Repeater. Approved by Telstra Optus and Vodafone. Boosts 3G 4G and 5G DSS signals effortlessly.

Description::

Enterprise-Grade Mobile Signal Booster with Easy Installation and Advanced Connectivity

The CEL-FI ROAM R41 combines enterprise-grade performance with user-friendly installation making it perfect for boosting mobile signal in vehicles such as cars trucks RVs and boats. Its compact low-profile design allows for discreet installation while its rugged frame ensures durability. Powered by the advanced 4th generation Nextivity IntelliBoost chip ROAM R41 offers exceptional signal gain for reliable 3G 4G and 5G DSS connectivity ensuring seamless communication and streaming on the go.

Key Features

Versatile Usage: Ideal for cars vans 4WDs trucks motorhomes caravans and boats.
Network Compatibility: Supports 3G 4G and 5G DSS for comprehensive connectivity.
Carrier Switching: Easily switch between Telstra Optus or Vodafone.
Frequency Bands Supported: 700L/850/900/1800/2100/2600 + Band 20 & 26.
IntelliBoost Technology: Latest 4th generation Nextivity IntelliBoost chip for targeted mobile network signal enhancement.
Plug-and-Play Installation: Simple setup process for immediate connectivity improvement.
5G DSS Support: Enables enhanced 5G signal with backward compatibility sharing frequencies with 4G.

Kit Includes

Nextivity CEL-FI ROAM R41 Smart Mobile Repeater
GME AT4715BA 4G-5G Spring-Mount Bull Bar Antenna 690 to 3800 MHz 1200 mm

The CEL-FI ROAM R41 ensures you stay connected with reliable signal boosting whether you're on the road or water enhancing both productivity and safety.

Specification:

Frequency Bands	1/3/5/7/8/20/26/28L
Relay Channel Bandwidths (MHz)	5/10/15/20
Networks	3G/4G/5G
Network Protocols	WCDMA/LTE/DSS
Network Selection	Automatically (MyWave App set to “Following”)
Configured to authorized operator PLMN-IDs
Duplex Modes	FDD
# of Relay Bands (MHz max.)	1
Relay Bandwidth (MHz max.)	20
Output Downlink Power (All Bands) (dBm max.)	0
Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.)	22
Output Uplink Power (Bands 1/3/7) (dBm max.)	24
System Gain (dBm max.)	100
Enterprise-Grade Echo Cancellation (dB min.)	30
Return Loss (dB typ.)	-8

@81/75

Nextivity CEL-FI ROAM R41 4WD to Caravan Pack (GME AT4705BA + Omni)

~~$1,710.95~~ $1,707.96

Boost your caravan's signal with the Nextivity CEL-FI ROAM R41 4WD Pack. Includes GME AT4705BA and Omni antenna for reliable connectivity on the go.

Description::

Boosts Mobile Signal Across Vehicles in Remote or Urban Locations

This approved signal repeater enhances mobile coverage for vehicles including cars trucks caravans and boats. Supporting Telstra Optus and Vodafone it boosts 3G 4G and 5G DSS signals using advanced IntelliBoost technology. Designed for easy plug-and-play installation it’s an ideal solution for improving connectivity on the move. It requires a 12V auxiliary power outlet for operation.

Key Features

Telstra Optus and Vodafone approved: Fully certified for use on Australia’s major carrier networks.
Multi-band support: Compatible with 3G 4G and 5G DSS networks.
Wide frequency range: Supports 700L 850 900 1800 2100 2600 plus Band 20 and 26.
IntelliBoost chip: Nextivity's 4th generation chip provides precise channelised signal boosting.
Carrier switchable: Easily toggle between Telstra Optus or Vodafone as needed.
Vehicle-ready installation: Ideal for cars vans 4WDs trucks caravans boats and more.
Plug-and-play setup: Quick installation with minimal technical setup required.
12V power only: Can only be powered through a 12V auxiliary outlet.

Kit Includes

Nextivity CEL-FI ROAM R41 Smart Mobile Repeater
Powertec 4G-5G Indoor Wall Mount Panel Antenna 698 to 4000 MHz N Female
Blackhawk 4G Marine Cellular Antenna 698 to 2700 MHz N Female (no mount)
PTL-240 Coaxial Cable N Male to SMA Male 10m
PTL-240 Coaxial Cable N Male to SMA Male 6m
Marine Mount – Nylon 2-Way Adjustable Knock-Down Mount 1"-14 UNS thread
Nextivity CEL-FI GO Stationary 240v Power Supply AU
GME AT4715BA 4G-5G Spring-Mount Bull Bar Antenna 690 to 3800 MHz 1200 mm

Enhance mobile reception on the road with powerful carrier-approved signal boosting.

This product enables the ROAM R41 to be run from 24V vehicles.

Specification:

Frequency Bands	1/3/5/7/8/20/26/28L
Relay Channel Bandwidths (MHz)	5/10/15/20
Networks	3G/4G/5G
Network Protocols	WCDMA/LTE/DSS
Network Selection	Automatically (MyWave App set to “Following”)
Configured to authorized operator PLMN-IDs
Duplex Modes	FDD
# of Relay Bands (MHz max.)	1
Relay Bandwidth (MHz max.)	20
Output Downlink Power (All Bands) (dBm max.)	0
Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.)	22
Output Uplink Power (Bands 1/3/7) (dBm max.)	24
System Gain (dBm max.)	100
Enterprise-Grade Echo Cancellation (dB min.)	30
Return Loss (dB typ.)	-8

@117/105

Nextivity CEL-FI ROAM R41 4WD to Caravan Pack (Trucker Compact + Omni)

~~$1,604.95~~ $1,602.96

Stay connected on the road with Nextivity CEL-FI ROAM R41 4WD to Caravan Pack. Boost signal in your caravan or truck with Trucker Compact + Omni.

Description::

Now approved by Telstra Optus and Vodafone

FEATURES:

Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
Support for 3G 4G and 5G DSS
Suitable replacement for GO G31 Mobile
Carrier switchable between Telstra Optus or Vodafone
Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
Ease of installation with plug-and-play operation

Kit Includes:

Nextivity Cel-Fi ROAM R41 Smart Mobile Repeater
Blackhawk 4G Trucker Edge Compact Antenna 68cm 698 to 2200Mhz SMA Male
Powertec 4G-5G Indoor Wall Mount Panel Antenna 698 to 4000hz N Female
Blackhawk 4G Marine Cellular Antenna 698 to 2700Mhz N Female (No mount)
PTL-240 Coaxial Cable N Male to N Male 10m
PTL-240 Coaxial Cable N Male to N Male 6m
Marine Mount - Nylon 2-Way Adjustable knock-Down Mount 1"-14 UNS Thread
Nextivity Cel-Fi GO Stationary 240v Power Supply AU

*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.

Specification:

Frequency Bands	1/3/5/7/8/20/26/28L
Relay Channel Bandwidths (MHz)	5/10/15/20
Networks	3G/4G/5G
Network Protocols	WCDMA/LTE/DSS
Network Selection	Automatically (MyWave App set to “Following”)
Configured to authorized operator PLMN-IDs
Duplex Modes	FDD
# of Relay Bands (MHz max.)	1
Relay Bandwidth (MHz max.)	20
Output Downlink Power (All Bands) (dBm max.)	0
Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.)	22
Output Uplink Power (Bands 1/3/7) (dBm max.)	24
System Gain (dBm max.)	100
Enterprise-Grade Echo Cancellation (dB min.)	30
Return Loss (dB typ.)	-8

@110/99

Nextivity CEL-FI ROAM R41 4WD to Caravan Pack (Trucker Edge + Omni)

~~$1,601.95~~ $1,598.96

Enhance your 4WD and caravan journeys with Nextivity CEL-FI ROAM R41. Featuring Trucker Edge and Omni antennas for superior mobile signal in remote areas.

Description::

Now approved by Telstra Optus and Vodafone

FEATURES:

Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
Support for 3G 4G and 5G DSS
Suitable replacement for GO G31 Mobile
Carrier switchable between Telstra Optus or Vodafone
Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
Ease of installation with plug-and-play operation

Kit Includes:

Nextivity Cel-Fi ROAM R41 Smart Mobile Repeater
Blackhawk 4G Trucker Edge Antenna 95cm 698 to 2200Mhz SMA Male
Powertec 4G-5G Indoor Wall Mount Panel Antenna 698 to 4000hz N Female
Blackhawk 4G Marine Cellular Antenna 698 to 2700Mhz N Female (No mount)
PTL-240 Coaxial Cable N Male to N Male 10m
PTL-240 Coaxial Cable N Male to N Male 6m
Marine Mount - Nylon 2-Way Adjustable knock-Down Mount 1"-14 UNS Thread
Nextivity Cel-Fi GO Stationary 240v Power Supply AU

*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.

Specification:

Frequency Bands	1/3/5/7/8/20/26/28L
Relay Channel Bandwidths (MHz)	5/10/15/20
Networks	3G/4G/5G
Network Protocols	WCDMA/LTE/DSS
Network Selection	Automatically (MyWave App set to “Following”)
Configured to authorized operator PLMN-IDs
Duplex Modes	FDD
# of Relay Bands (MHz max.)	1
Relay Bandwidth (MHz max.)	20
Output Downlink Power (All Bands) (dBm max.)	0
Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.)	22
Output Uplink Power (Bands 1/3/7) (dBm max.)	24
System Gain (dBm max.)	100
Enterprise-Grade Echo Cancellation (dB min.)	30
Return Loss (dB typ.)	-8

@110/99

Nextivity CEL-FI ROAM R41 4WD to Caravan Pack (Trucker Mini + Omni)

~~$1,569.95~~ $1,566.96

Boost mobile signal on the go with Nextivity CEL-FI ROAM R41 4WD to Caravan Pack. Includes Trucker Mini & Omni antennas for reliable coverage in remote areas.

Description::

Now approved by Telstra Optus and Vodafone

FEATURES:

Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
Support for 3G 4G and 5G DSS
Suitable replacement for GO G31 Mobile
Carrier switchable between Telstra Optus or Vodafone
Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
Ease of installation with plug-and-play operation

Kit Includes:

Nextivity Cel-Fi ROAM R41 Smart Mobile Repeater
Blackhawk 4G Trucker Mini Antenna 40cm 698 to 2700Mhz N Female
Powertec 4G-5G Indoor Wall Mount Panel Antenna 698 to 4000hz N Female
PTL-240 Coaxial Cable N Male to N Male 10m
PTL-240 Coaxial Cable N Male to N Male 6m
Marine Mount - Nylon 2-Way Adjustable knock-Down Mount 1"-14 UNS Thread
Nextivity Cel-Fi GO Stationary 240v Power Supply AU

*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.

Specification:

Frequency Bands	1/3/5/7/8/20/26/28L
Relay Channel Bandwidths (MHz)	5/10/15/20
Networks	3G/4G/5G
Network Protocols	WCDMA/LTE/DSS
Network Selection	Automatically (MyWave App set to “Following”)
Configured to authorized operator PLMN-IDs
Duplex Modes	FDD
# of Relay Bands (MHz max.)	1
Relay Bandwidth (MHz max.)	20
Output Downlink Power (All Bands) (dBm max.)	0
Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.)	22
Output Uplink Power (Bands 1/3/7) (dBm max.)	24
System Gain (dBm max.)	100
Enterprise-Grade Echo Cancellation (dB min.)	30
Return Loss (dB typ.)	-8

@108/97

Nextivity CEL-FI ROAM R41 Caravan Omni Pack inc. Ceiling Dome

~~$1,411.95~~ $1,409.96

Nextivity CEL-FI ROAM R41 Caravan Omni Pack inc. Wall Mount

~~$1,411.95~~ $1,409.96

Nextivity CEL-FI ROAM R41 Caravan Wideband LPDA Pack inc. Ceiling Dome

~~$1,225.95~~ $1,223.96

Nextivity CEL-FI ROAM R41 Caravan Wideband LPDA Pack inc. Wall Mount

~~$1,225.95~~ $1,223.96

Enhance mobile connectivity on-the-go with Nextivity's CEL-FI ROAM R41 Smart Mobile Repeater. Approved by Telstra Optus and Vodafone. Boosts 3G 4G and 5G DSS signals effortlessly.

Description::

Experience seamless on-the-go connectivity with CEL-FI ROAM R41. Approved by Telstra Optus and Vodafone this plug-and-play solution ensures uninterrupted voice and data transmission during your nomadic adventures. Boosting signals in caravans it supports 3G 4G and 5G DSS. Say goodbye to coverage gaps with this trusted companion. Switch carriers effortlessly and enjoy hassle-free installation with its intuitive operation.

The ROAM R41 boasts enterprise-grade performance combined with a user-friendly installation design making it incredibly easy to set up and power on. Regardless of whether you're in a car truck or RV this compact solution keeps you connected wherever you roam. Its low-profile design enables discreet installation under any seat while its rugged frame ensures durability enhancing both productivity and safety for individuals and mobile devices alike.

Equipped with the cutting-edge 4th generation Nextivity IntelliBoost chip ROAM R41 features advanced technology utilized in our enterprise cellular coverage solutions. This chip delivers unparalleled signal gain guaranteeing that you can always make calls send texts enjoy your favourite music and stay on the right route while on the road. Offering reliable 3G 4G and 5G DSS connectivity within vehicles including fleet vehicles the CEL-FI ROAM R41 is the ultimate solution to address poor coverage issues and enable dependable calling texting and streaming while on the move.

Setting up ROAM R41 is a breeze with its plug-and-play operation allowing you to improve connectivity in any car truck or RV within minutes.

FEATURES:

Ideal for boosting mobile signal in a car van 4WD truck motorhome caravan or boat.
Support for 3G 4G and 5G DSS
Suitable replacement for GO G31 Mobile
Carrier switchable between Telstra Optus or Vodafone
Supports 700L/850/900/1800/2100/2600 + Band 20 & 26
The latest 4th generation Nextivity proprietary IntelliBoost chip delivers channelised coverage for specific mobile network operator signals
Ease of installation with plug-and-play operation

*Note: This device can ONLY be connected with a 12V auxiliary power outlet. This product enables the ROAM R41 to be run from 24V vehicles.

Supports 5G DSS on Telstra Optus and Vodafone
This is a type of 5G that layers both 4G and 5G on top of each other sharing the same frequency.
The WAVE App will not display 5G is being boosted but your handset will have boosted 5G signal and a 5G icon.
May not be available in all areas on all bands.

Specification:

Frequency Bands	1/3/5/7/8/20/26/28L
Relay Channel Bandwidths (MHz)	5/10/15/20
Networks	3G/4G/5G
Network Protocols	WCDMA/LTE/DSS
Network Selection	Automatically (MyWave App set to “Following”)
Configured to authorized operator PLMN-IDs
Duplex Modes	FDD
# of Relay Bands (MHz max.)	1
Relay Bandwidth (MHz max.)	20
Output Downlink Power (All Bands) (dBm max.)	0
Output Uplink Power (Bands 5/8/20/26/28L) (dBm max.)	22
Output Uplink Power (Bands 1/3/7) (dBm max.)	24
System Gain (dBm max.)	100
Enterprise-Grade Echo Cancellation (dB min.)	30
Return Loss (dB typ.)	-8

@84/78

Nextivity CEL-FI ROAM R41 Magnetic Pulse Larson Pack

~~$1,096.95~~ $1,093.96

Nextivity

Follow us for more flavours