WallMote. Wireless Z-Wave control. On tap.
On any wall.
WallMote is the wall switch that you can install anywhere. Wirelessly.
Whatever the room, whatever the wall, WallMote is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.
Simple to install.
WallMote is the wall switch for anywhere because of it is simple to install. Mounting it requires just two steps.
1. Attach the mounting plate.
WallMote’s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done.
2. Attach WallMote.
WallMote is attractive. Literally. Simply place it in front of the mounting plate and it will magnetically attach.
Or anywhere.
It is great as the wall switch that you can place anywhere. But WallMote is also the wall switch that you can use anywhere.
Designed for simple recharging and portable use, WallMote’s magnetic mount means that you can simply pull it away from the wall it is mounted on whenever you need it somewhere else. WallMote. Coffee-table-Mote. Bedside-Mote. Anywhere-Mote.
Control on tap.
Control one Z-Wave device. Control many. And all with a single tap.
There is simplicity in tapping touch glass. smartphones proved it. There is power too. Each of WallMote’s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between.
Tap. Control.
Device control. Or Scene control.
Tap to control a single Z-Wave device from WallMote or press and hold for advanced controls.
Group Z-Wave and other connected devices together via your gateway and activate them via WallMote.
Tap control.
WallMote does not just offer control on tap. Each button is touch sensitive, meaning you can access new commands and control scenes simply by holding your finger a little longer.
Slide control.
Press and hold. Swipe up. Swipe down. Tap. Through capacitive touch, each of these lets WallMote do something different. Dim lights on a whim. Open curtains to let in a little bit more light. Through the power of touch, WallMote does not just offer whole home control, it offers precise control on demand.
Wireless wall switch.
Wireless home control.
Control a light. Control a room. Control a home.
Because WallMote communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can. Even things that are not Z-Wave. Smart lighting from Philips Hue? Check. Connected music from Sonos? Easy. If it is connected to your gateway, simply add it to a scene that WallMote can control and it is on top.
Wireless switch.
To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres / 492 feet.
Secure switch.
Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.
Subtle switch.
Not just portable, but perfectly balanced. The minimalist design of both WallMote and WallMote Quad measures just 7.7cm wide and a slender 1.9cm deep (3.0 x 0.4 inches).
Simple recharging.
Battery powered but without the need to ever change a battery, WallMote and WallMote Quad are both powered by a rechargeable lithium battery designed for smartphones. It recharges just like a smartphone too via the provided micro USB cable.
Haptic feedback.
It is capable of controlling your whole home, so you may not even be present to see things change when you press WallMote’s touch glass. But you will feel the change. WallMote’s haptic engine confirms your every action via a click sensation.
Gen5 built in.
WallMote and WallMote Quad are part of Aeotec’s Gen5range of Z-Wave devices. Built upon the latest version of Z-Wave- Z-Wave Plus – cutting-edge performance and security is crafted into Z-Wave’s most advanced battery-powered wall switch.
Technical Specifications
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
Z‐Wave device type
|
Multilevel controller
|
Power
|
Rechargeable Lithium-ion
|
Operation Range
|
Up to 40m without obstacles
|
Application
|
Indoor use only
|
Operation temperature
|
0 ~ 55 °C
|
Storage temperature
|
‐10 ~ 80 °C
|
Color
|
White
|
Weight
|
100g
|
Housing
|
ABS
|
Dimensions
|
(LxWxH) 72mm x 72mm x 9mm
|
Compliance
|
Z-Wave Plus certified
|
Warranty | 12 Months |