Quick Overview

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 
VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. 
The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood 
sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting 
tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave 
network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of 
substantial inundation of water.

Product Details

• Compatible with any Z-Wave network controller,

• May be connected to any alarm system (potential free output terminal),

• Extremely easy installation - simply put on a surface prone to flooding,

• May be installed anywhere - flood sensor’s contacts extended with a wire,

• Battery or VDC powered. When connected to an external, VDC power source, the 

 battery serves as an emergency power source, 

• Theft protection - tilt is reported to the Z-Wave network or alarm system’s main controller,

• Two operating modes - flood / temperature sensor or just a temperature sensor.

Technical Specifications

Product Name	Flood Sensor
Battery Type	CR123A
Operation Range	30m
Power	12 - 24 VDC (optional)
Radio frequency	921.42 MHz (AU/NZ Z-Wave)
Power Consumption	0,4W
Operation temperature	0 - 40C*
Measured temperature range	-20 to 100C
Temperature measuring accuracy	0,5 C
Housing	ABS
Size (Diameter x Height)	72 x 28 mm