Home Automation

WallMote. Wireless Z-Wave control. On tap.

On any wall.

WallMote is the wall switch that you can install anywhere. Wirelessly.

Whatever the room, whatever the wall, WallMote is perfect. It is the wireless, Z-Wave wall switch that you can place anywhere, on any wall, with as little as double sided tape. Unpack it. Stick it. Charge it. Control is just a tap away.

Simple to install.

WallMote is the wall switch for anywhere because of it is simple to install. Mounting it requires just two steps.

1. Attach the mounting plate.

WallMote’s mounting plate affixes to any wall or surface using custom mounting tape. Peel. Stick. Done.

2. Attach WallMote.

WallMote is attractive. Literally. Simply place it in front of the mounting plate and it will magnetically attach.

Or anywhere.

It is great as the wall switch that you can place anywhere. But WallMote is also the wall switch that you can use anywhere.

Designed for simple recharging and portable use, WallMote’s magnetic mount means that you can simply pull it away from the wall it is mounted on whenever you need it somewhere else. WallMote. Coffee-table-Mote. Bedside-Mote. Anywhere-Mote.

Control on tap.

Control one Z-Wave device. Control many. And all with a single tap.

There is simplicity in tapping touch glass. smartphones proved it. There is power too. Each of WallMote’s buttons can be programmed to control one Z-Wave device or many. Meaning that a single tap on its smooth surface can change a single light, a whole room, or your whole home. Tap good morning. Tap good night. Tap all the moments in between.

Tap. Control.

Device control. Or Scene control.

Tap to control a single Z-Wave device from WallMote or press and hold for advanced controls.

Group Z-Wave and other connected devices together via your gateway and activate them via WallMote.

Tap control.

WallMote does not just offer control on tap. Each button is touch sensitive, meaning you can access new commands and control scenes simply by holding your finger a little longer.

Slide control.

Press and hold. Swipe up. Swipe down. Tap. Through capacitive touch, each of these lets WallMote do something different. Dim lights on a whim. Open curtains to let in a little bit more light. Through the power of touch, WallMote does not just offer whole home control, it offers precise control on demand.

Wireless wall switch.
Wireless home control.

Control a light. Control a room. Control a home.

Because WallMote communicates directly with your Z-Wave gateway, it can be used to control anything that your gateway can. Even things that are not Z-Wave. Smart lighting from Philips Hue? Check. Connected music from Sonos? Easy. If it is connected to your gateway, simply add it to a scene that WallMote can control and it is on top.

Wireless switch.
To be used anywhere in your home, WallMote and WallMote Quad need to be more than wireless. They need to be impressively wireless. Both switches offer a fine-tuned antenna capable of communicating over an open range of over 150 metres / 492 feet.

Secure switch.
Technology changes, now your wall switches change with it. WallMote and WallMote Quad are cutting-edge today and will be cutting-edge tomorrow. They are both capable of receiving wireless firmware updates via Z-Wave Plus so that they are always up to date.

Technical Specifications

Range Extender 6.

The Range Extender 6 keeps it reliable. We all know how annoying weak wireless signals can be. Weak WiFi and poor phone signals are frustrating. Imagine if your smart home was also plagued by weak wireless signals and the same frustrations? Your smart home would not be very smart. The Range Extender 6 from Aeotec ensures that your connected home stays connected. It intelligently listens to the commands and reports that your Z-Wave network sends, actively capturing weak signals and then amplifying and repeating them.

Repeats wireless signals.

Repeats wireless signals.For your smart home to be perfect, its wireless signals need to be reliable. Range Extender 6 captures weak or slow signals and efficiently repeats them on to the rest of your Z-Wave network.

Amplifies wireless signals.

Amplifies wireless signals.Not only does Range Extender 6 accurately repeat Z-Wave signals, it amplifies them too and helps improve the reliability and accuracy of your Z-Wave network.

Big on impact. Small in size.

Range Extender 6 is a power-outlet friendly device, designed to be as small and as compact as possible without compromising on performance. so that it doesn’t block neighbouring power outlets.

Technical Specifications

The GOAP Z-Wave Tubular Motor Controller is the world's smallest Z-Wave module able to control 12-24V DC motors of blinds, rollers, shades and Venetian blinds.

Product Details

The GOAP Z-Wave Tubular Motor Controller is a Z-Wave Plus (500 series) controller for blind, roller and shade motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh). This device also supports precise positioning for motors equipped with mechanical or electronic switches.

The GOAP Z-Wave Tubular Motor Controller allows the connection of a temperature sensor which can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.

 This product integrates with all Australian certified (921.42 MHz) Z-Wave Controllers including;

• Vera Edge/3/Lite
• Fibaro Home Center 2/Lite

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Technical Specifications

The DOME Z-Wave Multi-Sensor is a versatile, battery-powered sensor designed for security and lighting automation applications.

The DOME Z-Wave Multi-Sensor is a versatile, battery-powered sensor designed for security and lighting automation applications. Dome Z-Wave Motion Detector / Light sensor works with Vera Edge/Plus and Wink! Your home security system just got bumped up a notch. If anyone is moving along where they shouldn't be, you'll know about it. Lights will go on and sirens will blare--should you choose, or maybe just a notification to your smartphone will be enough, but you get the picture. With the Dome Home Automation Motion Detector, you can program your Z-Wave hub to light the way when you enter a room, automatically turn on only the lights you want to, and turn them off when you leave. Built-in ambient light sensors dim lights to their perfect brightness Set it up to monitor your windows and doors, illuminate a hallway, or measure light levels so you're not wasting resources. It's like a camera, laser, and assistant in one, but cheaper and less intrusive. Use with most any Z-Wave Hub including VeraEdge/Plus, Fibaro HC2, Wink, Home Seer, SmartThings, Harmony and more (subject to local RF availability). Three-Year Battery Life and up to 50 m range. Ambient light detection and advanced configuration settings may not be available through all smart Hubs.

The DOME Z-Wave Siren is a versatile Z-Wave siren designed to alert you to more than just intruders. Release the power of your Z-Wave home security system with a siren that firmly reminds you something’s amiss or blares when trouble’s coming. The Dome Home Automation Wireless Z-Wave Battery Powered Home Security Siren works with your other security hub’s components to alert you when a door is ajar, there’s someone on your property or you have a home invasion. No need to look at your phone to know when it’s time to take action. Hear the signal and heed the call. The Dome Home Automation Battery-Powered Siren updates you with your choice of three volume levels and you can choose specific chimes for various notifications. Configure your siren to quietly let you know when your teen has left the building or has returned. Make sure you’re alerted if your bedroom window is opened at night. The siren and flashing LED lights can be set up to clue you in on doors that are open when they shouldn’t be. Install it easily without wires, anywhere, and its low footprint renders it almost invisible. Use with most any Z-Wave Hub including: Vera, Fibaro HC2, Wink, Home Seer, SmartThings, Harmony and more. Secondary Chimes, volume control and advance configuration settings my not be available through all smart Hubs. Visit Dome's How-to page for more information.

The DOME Z-Wave Water Sensor is a compact, battery powered water leak sensor. Dome Leak Sensor now officially works with Vera and Wink Z-Wave Gateways! The Dome Home Automation Wireless Z-Wave Leak Sensor with Remote Probe helps you cap leaks before they turn into gushes, so you can keep a lid on the amount of money you spend on water-related repairs. Use this battery-powered, smart-home leak detector anywhere you need to monitor water lines for potential problems. Its low-profile design allows you to hook it up underneath appliances and a 4-foot range remote sensor probe makes it easier to monitor water activity in hard-to-reach places like sump pumps. Toilets, refrigerators, water heaters, and other appliances and fixtures that require water lines can generate costly bills from ongoing small leaks and unexpected major breaks. The Dome Home Automation Water Resistant Leak Sensor keeps you up to date on the health of water lines leading in and out of these systems, and it sends you customized alerts via your connected Z-Wave Hub. Shut off main valves and take action when required. Use with most any Z-Wave Hub including: Vera, Wink, Fibaro HC2, Home Seer, SmartThings, Harmony and more (subject to local RF availability) .

• A BETTER MOUSE TRAP - Keep your kitchen and eating areas sanitary with a mousetrap that doesn’t leave you with blood or half-dead mice to deal with
• ELIMINATE RODENTS FROM RESTAURANTS - Electrocutes mice, rats, and other rodents quickly and effectively
• NO MORE SNAPPING YOUR FINGERS - Rat traps have moved beyond chasing away critters with loud sounds or using spring traps that are better at catching a pinky than a mouse
• SMART-HOME CONFIGURABLE - Connect this smart pest control device to your Z-Wave Hub to receive notifications when the trap is occupied. Integrates with SmartThings, Home Seer, Nexia, and other hubs
• UP TO 150-FOOT Z-WAVE RANGE - Set it up to work with your Z-Wave network or use it on its own, you can always upgrade to smart home connectivity later

The DOME Z-Wave Mouse Zapper is the smart, mess free way of removing rats from your home or business. Dome Smart Mouse Trap Taking care of critters in your kitchen and dining area is no pleasant task, but there’s a better way to do it that won’t leave you cleaning up blood or unsticking mice from a glue strip. The Dome Home Automation Mouse Trap eliminates mice quickly and effectively. Set this smart-home mouse trap up to work with your current Z-Wave automation hub, if applicable, or use it without connectivity. Either way, you get an efficient and mess-free pest control solution to keep rodents out of your cupboards and away from food and cooking tools. Commercial kitchens, restaurants, and many other types of businesses must be up to sanitation standards, and it’s easier to do with the Dome Home Automation Z-Wave Smart Electronic Mouse Trap. When connected to your Z-Wave Hub, you can get notifications when something’s been caught and it’s time to empty the trap. No stinker to find days or weeks later. Use with most any Z-Wave Hub including: Vera, Fibaro HC2, Home Seer and more.

The FIBARO Z-Wave D/W Sensor 2 is a small, battery powered magnetic door and window sensor with a built in temperature sensor.

Product Details

The FIBARO Z-Wave D/W Sensor 2 is a smart magnetic door/window sensor capable of sending binary ON/OFF commands wirelessly using the Z-Wave network (AUS/NZ version 921.42 MHz) when it is triggered.

The detector consists of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of your Z-Wave system by monitoring the opening of doors, windows and garage doors.

The FIBARO Z-Wave D/W Sensor 2 can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network. It is also useful for climate control systems, monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.

This sensor includes a built in temperature sensor which further extends your Z-Wave network's climate control capablities by allowing it to detect the exact temperature in your home.

This product comes in multiple different colours.

Note: This device is currently only compatible (out of the box) with Fibaro Home Center 2 and Fibaro Home Center Lite controllers. 

To enable this device to work with Vera controllers you need to do the following:
Under the devices Advance>Params you need to change the following details:
device_type - urn:schemas-micasaverde-com:device:DoorSensor:1
device_file - D_DoorSensor1.xml
device_json - D_DoorSensor1.json

After all the details are confirmed by the system you will need to go to New service and press Reload Engine after this you will need to wait for the device to reconfigure before it will appear in your system, but once it has it should appear as a D/W sensor in the  Vera UI.

Technical Specifications

The VistaCam 1000 HD WEATHERPROOF OUTDOOR CAMERA WITH PUSH BUTTON PAIRING.

With easy Wi-Fi setup, weatherproof case, infrared night illumination and HD picture quality, VistaCam 1000 is perfect for outdoor camera applications such as patios, driveways and garages where AC power is nearby. Features motion detection for automated recording.

See what’s happening outside your home or small business with VistaCam 1000, the weatherproof outdoor HD video camera that’s as comfortable on a deck, patio, doorway or driveway as it is indoors. With one-touch Wi-Fi setup (WPS) VistaCam 1000 easily connects wirelessly to your Vera controller. Automatically records video and sound when motion is detected for playback later. View and hear anywhere on smartphone, tablet or browser, day or night. For viewing at night, the powerful built-in infrared (IR) illumination lets you see in the dark, up to fifteen feet from the camera. Supplied with an included AC power adapter that is plugged into a nearby outdoor AC outlet (such as found on a deck or side of a house.)

• See home or small business in clear high definition (720p) video quality
• One-touch WPS setup easily connects wirelessly to your Vera controller (or home Wi-Fi)
• Motion detection with built-in PIR sensor automatically triggers video recording
• Built-in microphone lets you hear who is at the door, listen to kids playing in back, or know what intruders are saying
• Built-in Backup Memory (8-GB) records video even when internet service goes out (and uploads automatically when service is restored)
• Weatherproof connector for included power adapter withstands harsh outdoor conditions

Sensor and Lens

• Image Sensor: 4 megapixel 1/3″ CMOS Sensor
• Minimum Illumination: 0 Lux (with IR LED)
• Lens: Fixed Focus Lens, Aperture: F2.0
• Field of View: 110°
• PIR Motion Sensor: 5-meters detection range

Video

• Video Compression: H.264 Main Profile, M-JPEG
• Image Settings: Flip, Mirror, Brightness, Sharpness, White Balance
• Video Backup Memory: 8GB
• Video Streaming: Simultaneous H.264 and M-JPEG
• Resolution and Frame Rate: 16:9 720p (1280×720), 640×360 4:3 XGA (1024×720), VGA (640×480) and QVGA (320*240), Mixed Mode 720p, VGA, and QVGA, Up to 30 fps

Audio

• Built-in Microphone

Network

• Protocols: TCP/IP, HTTP, HTTPS, DHCP, FTP, uPnP, NTP, RTCP, DNS, RTSP
• Wireless

The PHILIO Z-Wave Multi-Sensor is a battery powered, PIR, temperature and light  level sensor, all in one small package.

Product Details

The PHILIO Z-Wave Multi-Sensor allows you to detect motion and to measure a room’s ambient temperature and light intensity. When included into a Z-Wave network with a home automation controller or Z-Wave gateway it can  be used to trigger scenes and activate other Z-Wave devices within your Z-Wave network. It can also alert the user of intruders via their Z-Wave gateway.

The PHILIO Z-Wave Multi-Sensor supports Over the Air (OTA) firmware updates and reports its battery status making it very easy to maintain.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

• Vera Edge, Vera Plus, Vera Secure
• Fibaro Home Center 2/Lite

Technical Specifications

The PHILIO Z-Wave Humidity Sensor is a battery powered, temperature and humidity sensor ideal for use in bathrooms or basements alongside a Z-Wave controlled exhaust fan to maintain a suitable level of humidity and prevent excessive dampness and mould formation.

Product Details

The PHILIO Z-Wave Humidity Sensor is designed for use in bathrooms, basements and other areas frequently subjected to excessively high or low humidity. It can be used alongside a Z-Wave controlled exhaust fan or heating/cooling system to ensure that a suitable level of humidity is maintained at all times preventing the formation of mould and other humidity related property damage.

The PHILIO Z-Wave Humidity Sensor supports Over the Air (OTA) firmware updates and reports its battery status making it very easy to maintain.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

• Vera Edge
• Fibaro Home Center 2/Lite

Technical Specifications

The absolute best selling GOAP Z-Wave Dimmer 0-10V is a unique. This Z-Wave product which was developed to provide for the needs of Smart Home users looking for a Z-Wave solution that controls devices such as lights, fans and similar products with 0-10V signal. The GOAP Flush Dimmer 0-10V is ideal for remotely dimming LED lights with low voltage ballast.

GOAP modules are “install-and-forget” products. GOAP are made to last, so we only select and use top-quality electronic components. These modules are also the most tested Z-Wave microcontrollers on the market. The Slovenian Institute of Quality and Metrology (SIQ), an independent testing body, tests safety parameters including temperature rise, construction, insulation resistance, power consumption and overload in accordance with the EN 60669-2-1 standard.
GOAP Ltd.  is a European company with 26-years experience in the automation field. With their expertise and passion for innovation in automation they have developed a unique, ready to sell, certified and reliable portfolio of 14 Z-Wave wireless Smart Home products under difirent  brands and OEM around the world.

All GOAP modules are manufactured in Italy.

• The GOAP Z-Wave Dimmer 0-10V occupies a smaller volume than comparable modules of any other brand and will fit easily in any flush mounting box
• Standard 0-10V output
• Multi-function input in connection with: push button / switch / potentiometer / input 0-10V (any sensor with 0-10V output)
• Perfect for dimming lights with balast 0-10V
• Controlling fan speed (for motors or frequency inverters with 0-10V speed control input)
• Controlling heating / cooling valves (with 0-10V input)
• Unlimited controlling capability through gateway
• Z-Wave Plus compliant
• 23 additional parameters for expert users 

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Please note: If you are installing the entire Z-Wave™ system for the first time, please refer to the installation guide of your Z-Wave gateway before installing this device.

The GOAP Flush Dimmer uses a unique MOSFET 'trailing edge' dimmer to enable it to work with a huge range of bulb types:

Halogen and Incandescent (230V)
Dimmable LEDs (230V)
Dimmable CFL and Fluorescent (230V)
Low Voltage Halogen (24V)
Low Voltage LED (24V)

The GOAP Z-Wave Dimmer can be used in the 230V mains lighting system where it uses a 'Trailing Edge' style dimmer to control the lights. It can also be used in a 24V low-voltage system where it it uses PWM style control of the bulbs.

Please note:These devices require a 3-wire system (including neutral), please check your installation before purchasing. 

The FIBARO Button is a compact, battery-powered Z-Wave Plus device that allows you to control devices and run scenes in your Z-Wave network.

Convenient size and mobility

The Button can be placed virtually anywhere. It can be fixed to a spot and moved when needed.

High quality and battery-powered

The finest standards of production ensure that the device works flawlessly and lasts a long time. The Button is powered by batteries and does not require any wires.

Always close

Use the Button whenever and wherever you need it.

Visible or hidden

Depending on your needs, you can keep The Button in view or place it out of sight.

Care for your loved ones

The Button is a great convenience for seniors, the sick, and small children along with their caretakers. Your loved ones are a click away and can inform you about their needs or call for help.

Click sequences and even more possibilities

The Button can recognize up to 6 actions. One click can turn off the light, two clicks can activate the AC unit, holding down the button may trigger a scene, etc.

Always in the right place

Place the Button exactly where you could use an additional switch.

Product Details

The FIBARO Button is a compact, battery-powered Z-Wave Plus device which allows you to manually activate and deactivate devices within your Z-Wave network and to activate scenes defined in your Z-Wave gateway.

The FIBARO Button supports up to 6 different actions/scenes which are triggered with one to five clicks or by holding the button down. In panic mode, each press of the button results in triggering of the emergency scene.

Designed to be small and light, the FIBARO Button can be conveninetly mounted on any surface and in any location (eg. beside the bed or under the desk)

Note: This device is currently only compatible with the FIBARO Home Center 2.

Technical Specifications

The GOAP Z-Wave Tubular Motor Controller is the world's smallest Z-Wave module able to control the motors of blinds, rollers, shades and Venetian blinds.

Product Details

The GOAP Z-Wave Tubular Motor Controller is a Z-Wave Plus (500 series) controller for blind, roller and shade motors. It is designed to fit into an existing switch and enables you to wirelessly control blind motors using a Z-Wave enabled (921.42 MHz in AUS/NZ) controller and reports the motors actual power (Watts) and total power consumption (kWh). This device also supports precise positioning for motors equipped with mechanical or electronic switches.

The GOAP Z-Wave Tubular Motor Controller allows the connection of a temperature sensor which can report the local temperature to your Z-Wave gateway allowing it to better meet your heating/cooling needs.

 This product integrates with all Australian certified (921.42 MHz) Z-Wave Controllers including;

• Vera Edge/3/Lite
• Fibaro Home Center 2/Lite

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Technical Specifications

The Vision 4 in 1Z-Wave Door/Window Sensor is a small, battery powered, magnetic sensor capable of detecting when a door/window is opened as well as changes in humidity, light and temperature.  This sensor is a Z-Wave enabled device (interoperable, two-way RF mesh networking technology) and is fully compatible with any Z-Wave Plus enabled network and its security framework.  Vision 4 in 1Z-Wave D/W sensor sends Z-Wave signal when door or window is opened or closed or there is a humidity, temperature, luminance change.

The Vision 4 in 1Z-Wave D/W Sensor includes a smart magnetic door/window sensor consisting of two magnetic units, one is placed on the moving part of the door or window and the other on the frame. The sensor expands the capabilities of the system by monitoring the opening of doors, windows and garage doors.

When the sensor is triggered it can send binary ON/OFF commands wirelessly using a Z-Wave enabled (AUS/NZ version 921.42 MHz) transmitter to assigned controllers, switches, dimmers, blind controllers, fans, power boards, locks etc. The sensor can be used to automatically turn on lights, turn wireless switches ON/OFF and for security applications within the Z-Wave network as well as monitoring whether any doors or windows are open to ensure that your air-conditioning is not operating when it is not efficient to do so.

The Vision 4 in 1Z-Wave D/W Sensor also reports temperature , humidity and illumination changes to the associated Z-Wave gateway which can be used to improve the efficiency of your smart home.

Featuring the new Z-Wave 500 series chip the Vision 4 in 1Z-Wave D/W Sensor supports higher data transfer rates (9.6/40/100kbps) as well as over-the-air firmware updates meaning it is always operating with the most advanced firmware available.

Integrates with Australian Z-Wave certified (921.42MHz) controllers including:

• Fibaro Home Center 2
• Fibaro Home Center Lite
• Homeseer

• Amazon Echo Dot is a hands-free, voice-controlled device that uses Alexa to play music, control compatible smart home devices, provide information, read the news, set alarms, and more.
• Connects to speakers or headphones through Bluetooth or 3.5 mm stereo cable to play music from Amazon Music Unlimited, Spotify, iHeartRadio, and TuneIn. Play music simultaneously across multiple Echo devices and speakers connected via cable with multi-room music. Services may require subscriptions or other fees; Bluetooth not supported for multi-room music.
• Call or message anyone hands-free who also has an Echo device or the Alexa App. Also, quickly connect to other Echo devices in your home using just your voice.
• Controls lights, switches and smartplugs with compatible connected devices from Philips Hue, LIFX, TP-Link, D-Link, Logitech Harmony and others.
• Hears you from across the room with seven microphones for far-field hands-free voice control, even in noisy environments or while playing music.
• Includes a built-in speaker so it can work on its own as a smart alarm clock in the bedroom, an assistant in the kitchen, or anywhere you might want a voice-controlled device.
• Always getting smarter - Alexa updates through the cloud automatically and is continually learning, adding new features and skills.

Sleek and compact design makes Amazon Echo Dot a convenient addition to any room in the house. With its built-in speaker, you can place Echo Dot in the bedroom and use it as a smart alarm clock that can also turn off your lights. Or use Echo Dot in the kitchen to easily set timers and more using just your voice. With multi-room music support, you can play music across multiple Echo devices simultaneously (Bluetooth not supported for multi-room music).

Echo Dot can also directly connect to speakers using a 3.5 mm stereo cable, using Bluetooth, or Wi-Fi for compatible wireless speakers to add voice control to your home stereo system in the living room.

Amazon Echo Dot provides hands-free voice control for Amazon Music Unlimited—just ask for your favourite artist, song, album or playlist. You can even request a specific genre or mood, or let Alexa pick the music for you. Listen to 45 million songs with Amazon Music Unlimited. Learn More

Echo Dot also provides hands-free voice control to Spotify, iHeartRadio and TuneIn.

Alexa calling and messaging — a new way to be together with family and friends. When you’re busy making dinner, just ask Alexa to place a call to anyone with a supported Echo device or the Alexa App. You can also enable a feature called Drop In to instantly connect with compatible Echo devices in your home.

With the Alexa App, conversations and contacts go where you go. When you’re away from home, use the App to make a quick call or send a message to your family’s Echo. To get started, download the latest version of the Alexa App on a smart phone with iOS 9.0 or higher, or Android 5.0 or higher, and verify your mobile number.

Use Amazon Echo Dot to switch on the lamp before getting out of bed, turn on the TV while reading in your favourite chair, or dim the lights from the couch to watch a movie - all without lifting a finger… or even raising your voice.

Echo Dot works with compatible smart home devices such as lights, switches and TVs from Philips Hue, LIFX, TP-Link, Logitech Harmony, and others. Learn more about compatible smart home connected devices, including starter kits for easy setup.

Echo Dot supports IFTTT (If This, Then That), a third-party service that allows you to create rules (or “applets”) that automate how your devices, apps, and websites work with each other.

Tucked under the light ring is an array of seven microphones that use beam-forming technology and enhanced noise cancellation. With far-field voice recognition, Amazon Echo Dot can hear you ask a question from any direction—even in noisy environments or while playing music.

When you want to use Echo Dot, simply say the wake word, “Alexa”, and Echo Dot lights up and streams audio to the cloud, where the Alexa Voice Service is leveraged to recognise and respond to your request. Learn more about voice recognition on Echo Dot.

Alexa, the brain behind Amazon Echo Dot, updates through the cloud automatically and is continually learning, adding new functionality and skills. The more you use Echo Dot, the more it adapts to your speech patterns, vocabulary, and personal preferences.

Features you can try include Alexa calling and messaging, multi-room music, routines, local search, movie showtimes, Google and Outlook.com calendar support, text-to-speech for Kindle eBooks and thousands of skills from third-party developers.

Skills add even more capabilities such as checking surf conditions with Coastalwatch, requesting a ride from Uber, discovering recipes with Taste.com.au, and more. Enabling skills lets your Amazon Echo Dot do even more—simply discover and enable the skills you want to use in the Alexa app.

New skills are being added all the time. You can also see ratings and reviews to learn what other customers are saying about skills in the Alexa App.

With the free Alexa app on Android (5.0 or higher), iOS (9.0 or higher) and desktop browsers, you can easily set up and manage your Amazon Echo Dot, Echo and Echo Plus.

Use the Alexa app to connect services such as Amazon Music Unlimited, Spotify and Google Calendar. Set up your compatible smart home devices from Philips Hue, LIFX, TP-Link, D-Link, Logitech Harmony, and more. View shopping and to-do lists while on the go. Control your timers and set custom tones for your alarms, and much more. The Alexa App is also where you discover and enable third-party skills.

Make calls to anyone with a supported Echo device or the Alexa app, view your conversation history, manage contacts and get notifications when you receive a message.

Feature

Get answers, play songs, tackle your day, enjoy your entertainment and control your smart home with just your voice.¹

The award winning Smanos K1 wireless smart home security system is Smanos's latest wireless, integrated smart home and security gateway, combining butler and guard-like functions into aesthetically designed round discs. The Smanos K1 is compatible with Google Home, Amazon Echo and Phillips Hue, offers intuitive on-site as well as remote smartphone operation of up to 50 connected wireless, DIY friendly, battery-powered devices. This includes sensors for doors & windows, motions sensors for hallways, bedrooms and living areas. The K1 is a proud winner of Red Dot Product Design and Computex D&I Gold Awards.

Features list:

• 100% wireless
• Plug and play for quick and easy installation
• Monitor and control via free Apple & Android APP 
• Compatible with Amazon Echo and Alexa
• Grant full access or restrict user permissions
• Away/Stay/Home arming options
• Schedule auto Arm/Disarm times
• Grant temporary access with time limits
• Exit and entry delay options
• Zone name and location customisation
• Two-way communication between sensors and K1 hub
• Operation and event log history
• Alarm, low battery and status alerts via APP push and email
• View UFO IP cameras from one Smanos APP
• 24hour SOS emergency triggering via APP

Package includes:

Smart Hub
Award-winning design for any home decor Plug and play
Sends push notifications and email messages when sensors are triggered
Operation and event log
Two-way communication between sensors and K1 hub
Views the doorbell and cameras from one smanos app
Accommodates customizable rules for connected devices
Grants temporary access with time limits

Door/Window Sensor
Detects openings and closings on doors or windows
Easy to install with 3M double-sided adhesive tape
Battery life up to 5 years
Tampering alarm

Security Keypad
Arms, Disarms and Home Arms the K1 system from 250 ft (80m) away (open area)
Feeds back system status
before Arming or Disarming
Unique non-numeric passcode
Battery life up to 2 years
Tampering alarm

Pet-Friendly Motion Sensor
Detects motion within 25 ft (8m)
Detection range: 90 degrees
Pet-immunity up to 55 lbs (25kgs)
Battery life up to 2 years
Mounting brackets for wall and corner
Tampering alarm

Indoor Siren
90dB loud deterrent 
Battery-powered, no wires
Battery life up to 2 years
Tampering alarm