Sort by:
Quick Overview
The Vision Z-Wave Deadbolt Keypad Lock is an intelligent lock capable of remote operation with compatible controllers.
- Open and close doors remotely with your Z-Wave control panel, PC, tablet or smartphone.
- Up to 13 different access codes.
- Access codes can be programmed to only operate at specific times.
- Uses 128 bit AES encryption for security.
- Designed for doors with a thickness of 35-45mm .
The Vision Z-Wave Deadbolt Keypad Lock is an advanced Z-Wave lock based on Z-Wave technology and has a range of intelligent features. The lock is designed for use in commercial and residential buildings.
In addition to the increased level of security, the Deadbolt's firmware has easy configuration options. These include the ability to install temporary access codes which only function during your desired times. It is also possible to open and close the Deadbolt remotely using a Z-Wave compatible device such as a Z-Wave control panel, PC, tablet or smartphone
It is possible to configure up to 13 access codes for different occasions. Each number combination can be between 4 and 10 digits. Successful and unsuccessful attempts to open the door will be recorded and sent to an associated computer or smartphone.
Installers do not have to make any extra effort to modify existing doors to install the Z-Wave Deadbolt. This Deadbolt is designed for doors with a thickness of 35 mm to 45mm, and can be installed in doors opening to the right or left. Please see all details in the installation manual.
This device is only compatible with Vera 3/Lite Home controllers.
Please Note: Access codes for this device can only be managed via a compatible Z-Wave controller. It is not possible to set up access codes manually without a compatible controller.
Product Support
⇒ Vision Z-Wave Deadbolt Lock Installation Manual (Size: 1.07 MB)
⇒ Vision Z-Wave Deadbolt Lock Operation Manual (Size: 235 KB)
Technical Specifications
|
RF Protocol
|
Z‐Wave
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐wave device type
|
Z-Wave Lock
|
|
Z‐wave Version
|
Z-Wave 4.51 SDK
|
|
Manual Compatibility
|
Key
|
|
Operating Voltage
|
6V, 4 AA batteries
|
|
Operation Range
|
Up to 30m with no obstacles
|
|
Application
|
Indoor/Outdoor use
|
|
Operation temperature
|
-10 ~ 50 °C
|
|
Storage temperature
|
-10 ~ 50 °C
|
|
Weight
|
1050g
|
|
Housing
|
Aluminium
|
|
Regulatory Compliance Mark
|
N5496
|
|
Dimensions
|
(LxWxH) 150mm x 70mm x 57 mm
|
Z-Wave LED Bulb Gen5 Multicolour.
Let there be light. Perfect light.
The perfect shade of everything.
Day light. Candle light. Party lights. Whatever the mood, whatever the setting, whatever the time of day, LED Bulb is ready to light a room with the perfect shade of light.
Plug it in to turn any light in your home into a smart light. From there, LED Bulb will fill your room with perfect light because LED Bulb has been designed with 16 million, perfect shades of light.
On those dim days when you need the lights on, LED Bulb can be tuned to emit same colour of light as comes through your windows. It’ll brighten to your room to the perfect level without you even noticing.
There’s daylight and then there’s the soft, warm light that beautifully fills a home at night. With technology dedicated to warm light, LED Bulb can fill a room with warm light or be as soft as a candle to read by.
Its two perfect shades of white light are joined by every other colour of light: 16 million in total. From mood lighting to notification lighting, LED Bulb has every colour of the rainbow, and then some, at your disposal.
Wireless bulb.
Smart bulb. Wireless bulb. Almost.
We can’t wirelessly power LED Bulb, but we have made it wirelessly powerful. Every LED Bulb comes with the Z-Wave home automation standard built right in. That makes this smart bulb one that can be controlled, automated and scheduled from anywhere in the world. It also makes it a smart bulb that can intelligently triggered from other smart devices, such as Aeotec’s MultiSensor 6.
From emergencies to someone being at the front door, set LED Bulb to shine particular colours for each event you wish to be notified about.
Whether it’s to automatically compensate for dull days or because you want manual control, LED Bulb is responsive and can be set anywhere between 0% and 100% brightness.
Create the prefect scenes for your home and have LED Bulb respond. Whether it’s the perfect movie mode or the right light for early mornings, LED Bulb has ambience down pat.
Truly connected, LED Bulb is directly controllable via any Z-Wave controller, from remote controls to gateways to other Z-Wave accessories.
Need LED Bulb to turn on or off at just the right time? Or a different time, depending on the weather? Schedule it to do just that using your Z-Wave gateway.
Bulbs no longer need just a light switch. Sync LED Bulb with a motion sensor to have it manage a room’s light; warm light greets you and automatically switches off when you leave.
Technical Specifications
- RGBW LEDs
- 16 million colours
- Dimmable
- 750 lumens
- 70 watt incandescent equivalent
- 9 watts of power use max
- 80 CRI
- 2,580 to 7,050 Kelvin
- 180º beam angle
- Z-Wave Plus with S0
- 69.7 x 142.9 mm
- 2.74 x 5.63 inches
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Multilevel dimmer
|
|
Power
|
240V AC
|
|
Operation Range
|
Up to 40m without obstacles
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
0 ~ 55 °C
|
|
Storage temperature
|
‐10 ~ 80 °C
|
|
Color
|
RGBW
|
|
Weight
|
100g
|
|
Housing
|
ABS, aluminium
|
|
Hours
|
25000 hours
|
|
Compliance
|
Z-Wave Plus certified
|
| Warranty | 12 Months |
Aeotec MultiSensor 6 Gen5 Z-Wave motion, light, temp, humidity, vibration, UV sensor
From $39.95
Unit price perAeotec MultiSensor 6 Gen5 Z-Wave motion, light, temp, humidity, vibration, UV sensor
From $39.95
Unit price perMake your home really intelligent.
One tiny device packed full of intelligence A smart home is only truly smart when it’s intelligent. A smart home has to offer more than a schedule; it has to react to what’s occurring in a home in real-time. MultiSensor 6 is the foundation of a modern smart home; within its perfectly small exterior lies all the technology for real-time intelligence.
6 sensors.
6 times the smarts.
Motion sensor. Motion for security. Motion for presence. Motion for management. MultiSensor 6’s motion sensor is perfect for more than just an intelligent security system. With a 5 metre range and a 120° field of view, MultiSensor 6 captures motion data that can be used for everything from security to heating management to energy saving. Knowing if a room is occupied or a hall is being used is a powerful piece of data – MultiSensor 6 makes your home automation system more powerful and more intelligent.
Temperature sensor.
From motorised curtains and windows to fans and thermostats, there are a lot of ways that you can use Z-Wave to keep the temperature of a room absolutely perfect. MultiSensor 6 provides the intelligence to do just that. Within each sensor is an incremental temperature sensor capable of accurately measuring between -10~50°C (14 to 122°F) and reporting temperature changes back to a smart home gateway.
Light sensor.
Automated lighting is only as smart as the system that powers it. With MultiSensor 6’s real-time, digital light sensor measuring the level of light in a room, your home control system will be able to intelligently maintain its ambiance. From opening and closing curtains, to setting lights to be the perfect level be it day or night, MultiSensor 6 is the smarts behind smart lighting.
Humidity sensor.
Spaces such as bathrooms and kitchens can be too humid, while some environments are often not humid enough. MultiSensor 6 offers incremental monitoring of a humidity ranging from 0% to 100%, allowing for the intelligent automation of fans, motorised windows, dehumidifiers and humidifiers. MultiSensor 6 monitors your home on such an infinitesimal level so that your home management system can make your environment truly perfect.
Vibration sensor.
It measures the environement it’s in, and it also measures itself. MultiSensor 6 contains a seismic sensor capable of detecting and reporting event-based vibrations. Those slight changes can be used to protect MultiSensor 6 – it’ll know if an intruder is tampering with it or if the sensor has accidentally moved from its place of installation. They’ll also be able to record subtle seismic activity within your home.
UV sensor.
Perfectly managing an environment means understanding it perfectly. MultiSensor 6 accurately measures ultraviolet light; the kind of light that causes everything from furniture bleaching to eye damage. Measured inline with the World Health Organisation’s UV Index, MultiSensor 6 measures a room’s UV level so that an environment can be managed through curtains, shades and lighting, and so that health and property recommendations can be made.
Outdoor sensor.
Use outdoor intelligence. IP20 rated, you can use MultiSensor 6 outdoors by disabling its motion sensor and usings its 5 other sensors.
Accurate sensor.
Designed and calibrated to be as accurate as possible, MultiSensor 6’s six sensors are fine tuned to have accuracy variations that are as little as only ±0.2%.
Updated sensor.
An intelligent sensor that will keep getting more intelligent, you can update MultiSensor 6’s settings and firmware using wirelessly.
Battery detection.
When run on batteries, MultiSensor 6 will send low battery warnings to your Z-Wave gateway before it’s time to change them.
Sensitivity.
MultiSensor 6 is sensitive to change. But it might be too sensitive for your needs. You can decrease or increase the sensor’s sensitivity from your Z-Wave gateway.
Calibration.
Every MultiSensor 6 is calibrated by our engineers for precision. And you can calibrate it too, adjusting the values of its sensors to be precise for your home, indoors and out.
Power modes.
It’s 2 year battery life is fantastic. But power it by cable and MultiSensor 6 can make even more accurate and more frequent sensor measurements.
Tamper detection..
Its security features are themselves secured. MultiSensor 6’s AES 128 bit wireless encryption is complemented by anti-tamper and drop sensors.
Perfect wireless.
An intelligence and security sensor needs to offer reliable wireless. MultiSensor 6 does. Its fine tuned antenna means that it can communicate with other Z-Wave devices up to 150 metres / 492 feet away.
The best MultiSensor. The best Z-Wave.
MultiSensor 6 has the newest version of Z-Wave built right in. It’s a better version of Z-Wave than you’ll find in our first MultiSensor and in competing products. It uses the latest chips and firmware for cutting-edge performance.
That Z-Wave is Gen5.
MultiSensor 6 is a part of Aeotec by Aeon Labs’ Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. It’s built upon the latest Z-Wave 500 series chip and firmware, offering a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. And, because security is integral, it always has AES 128 bit security encryption built right in.
Optional Recessor
Allowing either to be seamlessly installed and recessed within a wall or ceiling space.
Technical Specifications
|
RF Protocol
|
Z‐Wave Plus (500 series chip)
|
|
RF Frequency
|
921.42Mhz ‐ AU/NZ approved RF for Z‐wave
|
|
Z‐Wave device type
|
Z‐Wave multilevel sensor
|
|
Power
|
USB DC 4.75V to 5.25V
|
|
Operation Range
|
Up to 40m without obstacles
|
|
Application
|
Indoor use only
|
|
Operation temperature
|
0 ~ 55 °C
|
|
Storage temperature
|
‐10 ~ 80 °C
|
|
Color
|
White
|
|
Weight
|
74g
|
|
Housing
|
ABS
|
|
Dimensions
|
(LxWxH) 28mm x 28mm x 42mm
|
|
Compliance
|
Z-Wave Plus certified
|
| Warranty | 12 Months |
VeraLite is the simplest, most affordable way to start making your smart home smart and creating powerful new possibilities for yourself and your family.
Compact but armed with plenty of brains and muscle, the VeraLite smart controller instantly turns a home or apartment into a personal assistant for your busy life.
It makes possible all kinds of conveniences and savings that you’ll appreciate from day one, and come to love more and more over time as you start to see all the things it can do for you.
VeraLite is the gateway to all these benefits:
- EASY HOME SECURITY Keep watch over your home! VeraLite manages cameras, controls door locks and alerts you to activity when needed. You’ll always know that everyone’s ok.
- REDUCTIONS IN ENERGY BILLS VeraLite lets you see and control household energy consumption and tailor it for savings every month, automatically or by remote control.
- IMPORTANT ALERTS Wouldn’t you love to get an email or text that the kids got home safely? That the UPS guy dropped off your package? That your basement just got wet? VeraLite can send you one.
- AUTOMATIC COMFORT SETTINGS Have the house warm or cool the way you like it all the time, even for different house members, even as VeraLite saves you energy the rest of the time.
- LESS TIME WASTED When you know what’s going on at home and can control things, you don’t need to make as many trips home. VeraLite makes busy lives easier.
VeraLite does all this by being able to control any of hundreds of smart devices. And it does all this without interfering with your home’s other wireless electronics so you’re not slowing anyone down.
You simply plug VeraLite into your Internet connection or Wi-Fi system. You get a screen that lets you command and tailor VeraLite’s control functions from your PC or Mac, or with an easy app on your smartphone, or from a tablet, whatever. Wherever. Whenever. Even automatically.
The VeraLite is the easiest, most cost-effective way to make your home a smart home. And unlike the competition, VeraLite can be any kind of smart home youwant, not just the kind they want for you.
VeraLite is powerful, affordable, and gives you the foundation you need to get the smart home capabilities you want — all with no monthly fees!
SPECS
VeraLite Controller
Hardware
CPU: 500 MHz MIPS SoC
Flash Memory: NAND 32 MB
DDR2 Memory: 64 MB
USB Port: 1
WAN Port: 1
Z-Wave: Built-in with internal antennae
Dimensions
4.57in x 3.74in x 1.73in (HxWxD)
116mm x 95mm x 44mm (HxWxD)
Power Supply
Input :AC 100 ~ 240v, 50~60Hz
Output: DC 12V/2A
Battery Pack: 4 AA batteries (included)
Certifications
FCC, CE
Safety
UL/cUL
Logitech ConferenceCam Connect Portable Remote Wireless Video Conference Camera
$589.00
Unit price perLogitech ConferenceCam Connect Portable Remote Wireless Video Conference Camera
$589.00
Unit price perCONNECT
Portable ConferenceCam with Bluetooth speakerphone for the huddle room, home office, and on the go
- Superior video and audio with a compact, 76 mm footprint
- Works with your meeting and video conferencing applications
- Plug-free mobility with rechargeable battery
FLEXIBLE VIDEO FOR THE ANYWHERE WORKPLACE
KEY FEATURES
PERFECT FOR SMALL SPACES
Logitech Connect goes beyond its award winning design — video conferencing so simple to use that anyone can set it up and so affordable you can enable every meeting room with video. Designed for tabletop placement and small spaces, this video conference solution offers a generous 90° diagonal field-of-view with pan and tilt, 4x zoom, and razor-sharp optics making it easy to see everyone in the room.
COMPACT ALL-IN-ONE DESIGN
Take video conferencing on the go. Carry Connect from meeting to meeting, or pack it when traveling so you never miss the opportunity to meet face to face. With a tabletop footprint just 75 mm across, Connect fits just about anywhere. Even the handheld remote is designed for easy portability, docking as a lens cover so you won’t lose it in your bag.
COMPATIBLE WITH MOST VC APPS
Connect offers a plug-and-play USB connection to Windows and Mac® computers and Chromebooks™, and is certified for Skype for Business, Cisco Jabber™ compatible, and offers enhanced integration with BlueJeans, Broadsoft, LifeSize Cloud, Vidyo, and Zoom.
PREMIUM CAMERA LENS
Connect features a premium glass lens for maximum clarity. Enjoy bright, clear video with accurate color rendition and sharpness, even when zoomed in. Easily protect the lens from dust and scratches by docking the magnetic remote control.
ADDITIONAL FEATURES
EASY AUDIO CONFERENCING
Dialing into an audio conference? Already connected on your smartphone? Simply pair Connect via either Bluetooth® or NFC to enjoy outstanding audio clarity, volume, and dynamic range. Connect features two omnidirectional microphones and 360° wideband audio so everyone can hear and be heard.
PORTABLE POWER
Designed for convenient portability, Connect boasts an internal, rechargeable battery that can run video calls for up to 3 hours, and audio calls for up to 15 hours. Or, power Connect with the included AC power supply: swappable regional plugs (included) make it easy to to power and charge around the world.
USB PLUG-AND-PLAY CONNECTIVITY
With no special software, training, or maintenance required, launching an enterprise-quality video conference has never been easier. Simply plug Connect into your PC, Mac, or Chromebook: it works as both a webcam and an audio device with your video conferencing software.
SAFE AND SECURE
Connect’s remote control docks over the lens, providing an extra level of privacy. And when you want Connect to stay put, the Kensington security slot offers simple protection from theft.
SPECS & DETAILS
DIMENSIONS
Main Unit:
- Height x Width x Depth:
- 2 mm x 75 mm x 75 mm
- Weight: 766 g
Remote Control:
- Height x Width x Depth:
- 128 mm x 41 mm x 9 mm
- Weight: 32 g
SYSTEM REQUIREMENTS
- Windows®7, 8.1 or 10
macOS® X 10.10 or higher
TECHNICAL SPECIFICATIONS
CAMERA
- Full HD 1080p video calling (up to 1920 x 1080 pixels); 720p HD video calling (up to 1280 x 720 pixels) with supported clients
H.264 UVC 1.5 with Scalable Video Coding (SVC)
Supports H.264 SVC 1080p, along with optimizations for best call performance in single or multiparty HD video
Field of View
- Diagonal: 90°
- Horizontal: 82.1°
- Vertical: 52.2°
4X digital zoom
Rightlight™ 2 Technology for clarity in various lighting environments, even low light
Digital pan, tilt and zoom from remote control or optional downloadable app
Mechanical tilt wheel
Camera LED for active streaming indication
SPEAKERPHONE
- Integrated full duplex speakerphone with echo and noise cancellation
360° wideband audio
Bluetooth® and NFC enabled
LEDs for speakerphone streaming, mute, hold, and Bluetooth pairing
Controls for call answer/end, volume and mute
Microphones (Tx)
- Two omni-directional microphones supporting 3.6 m diameter range
Frequency response: 100Hz – 16KHz
Sensitivity: -34dB +/-3dB
Distortion: <1% @ 1KHz at 65dB
Speakers (Rx)
- Frequency response: 140Hz – 16KHz
Sensitivity: 89dBSPL +/-3dB at 1W/0.5M
Max output: 91.5dBSPL at 0.5M
Distortion: <5% from 200Hz
REMOTE CONTROL
- Docks on device and functions as a lens cover
IR 3 m range
CR2032 battery (included)
CABLES / POWER
- AC Power adapter with regional plugs
USB cable 1.8 m
Integrated rechargeable battery
MOUNT
- Designed for tabletop use
Kensington security slot
COMPATIBILITY AND CERTIFICATIONS
- Plug-and-play USB connectivity
Certified for Skype for Business and ready for Teams
Zoom Certified
Fuze Certified
Compatible with Google Meet
Cisco Jabber® and WebEx compatible
Compatible with BlueJeans, BroadSoft, GoToMeeting, Vidyo, and other video conferencing, recording, and broadcasting applications that support USB cameras
PACKAGE CONTENTS
- Logitech Connect device
Remote control
8 meter USB cable
Power adapter with regional plugs
Documentation
WARRANTY INFORMATION
2-Year Limited Hardware Warranty
PART NUMBER
PN: 960-001035
Day/Night HD Wi-Fi Baby Camera
D-link introduces the Day/Night HD Wi-Fi Baby Camera, transforming your mobile device into a versatile baby monitor to help you stay connected to your most valuable treasure, no matter where you are!
Download the free mydlink™ Baby app for your iPhone, iPad or Android device and follow the
simple steps to set up your camera
mydlink Baby App
Whether you're at home or on-the-go, the mydlink Baby app keeps you connected to your baby and allows you to manage all of your mobile device.
HD 720p High Quality Video
Never miss a detail with the sharp clarity of 720p HD picture for the best monitoring experience.
Two Way Audio
Whether you're in the next room or away from home, comfort your baby with the sound of your voice.
Sound & Motion Detection
Receive instant notification alerts when a movement or loud noise is detected.
Day & Night Vision
Keep an eye on your little one day or night with up to 16 feet of visibilty in the dark.
5 Classic Lullabies
Choose from 5 gentle lullabies to soothe your baby with the built-in speaker.
Instant Temperature Alerts
Keep the nursery at the perfect temperature and receive instant alerts when the room gets too hot or cold.
Photo & Video Snapshots
Save your photos and video clips directly to your mobile device's photo/video folder for easy sharing.
4x Digital Zoom
View more details of your baby with a few simple gestures.
Connect Directly
Even when an internet connection isn't available you can connect your mobile device to the camera's wireless network for instant local monitoring.
Specificaitons
Functions and Features
Camera
- HD resolution (1280 x 720)
- Night vision with infrared LEDs that turn on automatically when it gets dark
- 802.11n wireless lets you place the camera anywhere
- MicroSD/SDHC card slot1 for recording snapshots and video triggered by motion or sound
- Can be powered by an external USB battery
- 5 gentle lullabies built-in
- Interchangeable blue and pink accent color rings
Intelligent Baby Monitoring
- Sound detection alerts you to loud noises, such as a baby crying
- Temperature sensor and indicator light informs you if the room becomes too hot or cold
- Built-in motion detection lets you know if the camera detects movement
- Notifications can be sent to your mobile device for detected events
- Two-way audio lets you hear your baby and allows you to respond and calm your child
Convenient Control from your Mobile Device and Computer
- Uses the free mydlink™ Baby app for iPhone, iPad, and Android devices
- The mydlink™ Baby app helps you set up your device and gives you easy access to all functions
- View and control through the secure mydlink™ web portal
Technical Specifications
Camera Hardware Profile
- 1/4」 megapixel progressive CMOS sensor
- 16 ft night vision with infrared LEDs
- Minimum illumination: 0 lux with IR LEDs on
- Built-in microphone and speaker
- 4x digital zoom
- Tripod screw mount
- Focal length: 3.3 mm
- Aperture: F2.2
- Angle of view: (H): 66.18° (V): 35.9° (D): 76.22°
External Device Interfaces
- 802.11n wireless
- microSDHC card slot
- Reset button
- Lullaby, Volume Up/Down, and Power buttons
- Power port (Micro-USB)
Image Features
- Configurable image size
- Time stamp and temperature overlays
Video Compression
- H.264 format video compression
- JPEG for still images
Video Resolution
- 1280 x 720
- 640 x 360
Audio Support
- AAC
Baby Monitoring Features
- Sound detection with adjustable sensitivity
- Motion detection with adjustable sensitivity
- Records snapshots and video to microSD when triggered by motion or sound
- Temperature detection with configurable alert range
- Sends notifications when sound/motion/temperature change is detected
- 2-way audio lets you listen and respond to your child
Mobile App
- Free mydlink Baby Camera Monitor app available on the Apple App Store and Google Play
- Compatible with iPhone and iPad using iOS 5.1.1 or higher
- Compatible with Android smartphones and tablets using Android 4.01 or higher
Network
Network Protocols
- IPv4
- ARP
- TCP/IP
- UDP
- ICMP
- DHCP client
- HTTP
- HTTPS (for configuration)
- UPnP port forwarding
- RTP/RTSP/RTCP
Security
- Administrator protection
- Password authentication
- HTTP and RTSP digest encryption
Physical
Dimensions (L x W x H)
- 5.4 x 3.6 x 4.2 inches with temperature sensor fully extended
Weight
- Device: 4.9 oz
Power Input
- 5 V DC / 1.5 A, 50/60 Hz through power adapter
- Can be powered by an external USB battery with at least 2 A output
Power Consumption
- 7.5 watts max.
Temperature
- Operating: 0 to 40 °C (32 to 104 °F)
- Storage: -20 to 70 °C (-4 to 158 °F)
Humidity
- Operating: 20% to 80% non-condensing
- Storage: 5% to 95% non-condensing
Cerficications
- CE
- CE LVD
- FCC
- C-Tick
- Supports microSDHC Class 6 card and above up to 32 GB. MicroSD card not included.
- USB battery not included, requires at least 2A output.
Rugged Outdoor Reliability
The D-Link DCS-7513 Full HD Day & Night WDR Outdoor Bullet Camera is a high-definition professional surveillance camera suitable for small, medium, and large enterprises. The camera uses a high-sensitivity 2 megapixel progressive scan CMOS sensor to deliver high quality video under a wide range of lighting conditions. A remotely adjustable vari-focal lens with P-Iris ensures you can get the proper field of view, even after installation. The all-in-one rugged design makes this camera ideal for reliable deployment in surveillance applications without the need for additional accessories. The included cable management bracket protects the cabling from both vandalism and weather conditions. The IP66 rating of the DCS-7513 ensures the camera is protected from not only rain but also from water jets used to wash down buildings.
24-Hour Surveillance
The DCS-7513 has an integrated mechanical IR filter and infrared LEDs to allow the viewing and recording of video even in complete darkness, up to 30m away from the camera.
P-Iris & Motorised Lens
Motorised control of the P-Iris lens gives finer contrast and much clearer image quality in difficult lighting environments and allows remote zoom and focus.
Wide Dynamic Range (WDR) Applications
The Wide Dynamic Range (WDR) function provides properly exposed video even under backlit conditions where the intensity of illumination can vary significantly, making the DCS-7513 ideal for high-contrast environments such as such as parking structures, alleyways, entryways and shipping docks.
Multiple Video Streams
The DCS-7513 supports simultaneous streaming of H.264, MPEG-4, and MJPEG video to provide both high-quality and bandwidth efficient compression formats. H.264 produces a small file size, making it useful for extended recording with high detail or for use in low bandwidth networks. MJPEG delivers excellent file integrity, ideal for situations which require extensive image detail. The DCS-7513 supports multiple independent streaming profiles, each with its own resolution, frame rate and codec.
Flexible Connectivity
The DCS-7513 includes input and output ports for connectivity to external devices such as IR sensors, switches, and alarm relays. It also incorporate Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for supplemental power cabling.
Robust Management Software
D-ViewCam is a software program that allows you to view up to 32 cameras on a single computer screen from a central location. Motion detection and digital input devices trigger automated e-mail alerts that can instantly inform administrators of unusual activities.
Event Management
- Motion detection by weekly schedule
- Event notification and upload snapshots/video
- Clips via HTTP, SMTP or FTP
- Multiple HTTP, SMTP or FTP server configurations
- Multiple event notifications
- Multiple recording methods for easy backup
D-ViewCam™ Features
- Manage up to 32 cameras at once
- Adjustable image size and quality
- Custom recording schedules
- Event notifications
- Upload a customized floor plan
Compact and Strong
The DCS-6210 high resolution indoor/outdoor fixed dome camera is tough, vandal resistant, and weatherproof. Industry rated, it is extremely versatile and unobtrusive, easy to mount anywhere, and the fully adjustable 3-axis gimbal allows you to get the view you need. The rugged IP66-rated housing is designed for the harshest environments. Equipped with a high resolution 2 megapixel sensor to provide Full HD 1080p video, the DCS-6210 also comes with an SD card slot for local video storage.
Built for Tough Environments
The DCS-6210 has a toughened metal, industry-certified IK10 (vandal proof) and IP66 (weatherproof) housing, specially designed for use in rugged environments, and built to withstand sudden high impact and adverse weather conditions.
Flexible Installation
The DCS-6210 has a Power over Ethernet (PoE) port which allows you to connect the camera to your network and power it through a single cable. This both expands and simplifies your options by doing away with the need for a nearby power outlet, making installation on ceilings much easier. The DCS-6210 can alternatively be powered by 12VDC, which broadens installation options, including transportation and solar deployments.
Surveillance in Full High Definition
The DCS-6210 is built with a 2 megapixel image sensor to provide both high-quality snapshots and video with resolutions up to 1920 x 1080. Get a closer look with ePTZ, which lets you zoom in, zoom out, and pan across your camera’s video so you can survey a large area easily.
A Complete, Expandable Surveillance Solution
The DCS-6210 is a self-sufficient surveillance solution, capable of recording snapshots and video to a microSD card without requiring a PC or network storage device. If you want to expand your surveillance options, D-ViewCam management software is also included, giving you the ability to manage up to 32 cameras with a robust set of features, including multi-camera views and automated e-mail alerts to keep you informed of suspicious or unusual activities.
Built for Versatility
The DCS-6210 comes with a wealth of features that enhance its surveillance capabilities, making it ideal for any situation. Its 3-axis lens mounting allows you to position it perfectly, while its motion detection capabilities allow it to automatically record video and send you a notification when motion is detected.
Open Network Video Interface Forum (ONVIF)
ONVIF is an open industry forum for the development of a global standard for the interface of IP-based physical security products. ONVIF identifies a standard for how IP products within video surveillance and other physical security areas can communicate with each other ensuring interoperability between products regardless of brand. The DCS-6210 is ONVIF-compliant and therefore compatible with many third party Video Management Software (VMS) solutions.
Robust Management Software
D-ViewCam is a software program that allows you to view up to 32 cameras on a single computer screen from a central location. Motion detection and digital input devices trigger automated e-mail alerts that can instantly inform administrators of unusual activities.
Event Management
- Motion detection by weekly schedule
- Event notification and upload snapshots/video
- Clips via HTTP, SMTP or FTP
- Multiple HTTP, SMTP or FTP server configurations
- Multiple event notifications
- Multiple recording methods for easy backup
D-ViewCam™ Features
- Manage up to 32 cameras at once
- Adjustable image size and quality
- Custom recording schedules
- Event notifications
Full HD Surveillance
The DCS-6113V delivers Full HD 16:9 widescreen IP video surveillance which provides vivid high-quality video, making it easier to view and monitor footage.
Multiple Video Streams
The DCS-6113V supports simultaneous streaming of H.264, MPEG-4, and MJPEG video to provide both high-quality and bandwidth efficient compression formats. H.264 produces a small file size, making it useful for extended recording with high detail or for use in low bandwidth networks. MJPEG delivers excellent file integrity, ideal for situations which require extensive image detail. Additionally, DCS-6113V supports multicast H.264 streaming, allowing users to view the camera feed by subscribing to a multicast IP address on the network.
Day and Night Functionality
The DCS-6113V can be used during both day and night. The ICR filter allows the camera to capture crisp colour images during the daytime and detailed grayscale at night, in low-night conditions, and with built-in Infra Red LEDs even in complete darkness.
Vandal and Tamper-proof
Vandal-proof and anti-tamper features make the DCS-6113V camera suitable for tamper-prone locations such as transportation hubs, schools, or correctional facilities. The robust camera housing is IK-10-certified, allowing it to withstand a high amount of force. The electronic tamper detection system can sense whenever the camera has been redirected, de-focused, blocked, or spray-painted, and respond promptly with a visible or audible alarm.
Flexible Connectivity
The DCS-6113V includes input and output ports for connectivity to external devices such as IR sensors, switches, and alarm relays. They also incorporate Power over Ethernet (PoE), allowing it to be easily installed in a variety of locations without the need for supplemental power cabling.
3GPP Mobile Surveillance
Support for 3GPP Mobile Surveillance allows users to view a live video feed from a 3GPP compatible Internet-ready mobile device. This extends monitoring capability, allowing users to check the camera’s video feed while on the go without a computer.
D-ViewCam™ for Management
The included D-Link D-ViewCam™ is sophisticated software which allows users to manage up to 32 network cameras, set e-mail alert notifications, create recording schedules, and use motion detection to record directly important events to a hard drive. D-ViewCam™ also allows users to upload a floor plan to create a realistic layout of the premises where cameras are located, further simplifying the management process.
Viewing Window and ePTZ
Customise your Region of Interest (ROI) by simply drawing a rectangle on the full view display in the web interface. Being able to digitally move the ROI is an advantage for a fixed camera since it can utilize the virtual auto pan along with preset point settings to display vivid details from HD video footage. The viewing window also allows you to utilize zoom to obtain more in-depth footage.
Open Network Video Interface Forum (ONVIF) compliant
The Open Network Video Interface Forum (ONVIF) is standards relating to open IP video networking. The DCS-6113V is ONVIF compliant and therefore interoperable with other manufacturer’s products on the same network such as cameras, storage systems, video analytics products and Video Management Systems.