Home Automation

The DS-2CE56H1T-IT3 camera is a high performing 5MP external TVI Technolgy TRUE WDR Turret (Eye Ball) Camera that transmits 5MP in TVI technology over Coax cable. 

Great for new installations or retrofit to existing coax cable for up to 500 Meters.

DS-2CE56H1T-IT3 2.8mm 5MP@20fps, 4MP@25fps(P)/30fps(N)(Default), EXIR, 40m IR, Outdoor EXIR Eyeball, ICR, 0.01 Lux/F1.2, 12 VDC, Smart IR, DNR, OSD Menu(Up the Coax), IP66, 

Key Features;

•    5 Megapixel high-performance CMOS
•    Analog HD output, up to 3MP resolution
•    2.8mm Lens
•    True Day/Night
•    OSD menu, DNR, Smart IR
•    True WDR, up to 120dB
•    EXIR technology, up to 40m IR distance 
•    IP67 weatherproof
•    Up the Coax(HIKVISION-C)

Note: 
This 5MP TVI Camera will work on the previous 3MP DVR's. However; by default, these are set to 5MP Resolution. If using previous Model TVI DVR then please consult your Sale staff to have the resolutions downgraded to 2MP before receiving, otherwise, these will not work on 2/3MP DVR's.
Note: Compatible with Hikvision 5MP TVI DVR's, Part No's 104-647 (4 Channel), 104-648, 104-650 (8 Channel) or 104-649 (16 Channel)

The GOAP Double Switch is Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted behind a traditional wall switch. The module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as a repeater in order to improve range and stability of Z-Wave network.

Supported switches

The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Strengthens Z-Wave Connectivity

The smart relay module has been designed to work as a Z-Wave repeater, thereby providing you the flexibility to extend the range of your Z-Wave network.

The GOAP double switch is Z-Wave Plus Certified. Z-Wave Plus (5th Generation Z-Wave) offers a lot of new features including increased range, extended battery life and Over The Air upgrading (OTA). 

Note!

Do not connect the module to loads exceeding recommended values. Connect the module only in accordance with the manual. Use only qualified electrician!

The GOAP Single Switch is Z-Wave module for switching on or off the electrical device (e.g. light, fan, etc ...). The module can be controlled either through Z-wave network or through the wall switch manually.

This module is designed to be mounted behind a traditional wall switch. The module measures power consumption of load and supports connection of digital temperature sensor. It is designed to act as a repeater in order to improve range and stability of Z-Wave network.

Supported switches

The module supports mono-stable switches (push button) and bi-stable switches. The module is factory set to operate with bi-stable switches.

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Note!

Do not connect the module to loads exceeding recommended values. Connect the module only in accordance with the manual. Use only qualified electrician!

The PHILIO Z-Wave PIR Sensor is a small, battery powered motion sensor capable of detection motion up to 10m. The sensor is attached to a magnetic mount which can be placed on a wall or ceiling and allows for 360° adjustable viewing direction.

This device also includes a lens cover which can be used to block the sensor's view of an area where detection is unnecessary.

The PHILIO Z-Wave PIR Sensor  is perfect for controlling the lights in any household. You can set them to switch ON when someone enters the room at night-time but not daytime. 

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

• Vera Edge/3/Lite
• Fibaro Home Center 2/Lite 

SPECS

 The Vera Plus Home Controller is an advanced home automation gateway that allows you to manage and control home automation devices.

This newest edition of the Vera gateway is compatible with an even wider range of devices than its predecessor (the Vera Edge) and supports ZigBee and Bluetooth wireless protocols along with Z-Wave and Wi-Fi. It also boasts a faster processor and more memory than its predecessor! And best of all, there are still NO MONTHLY FEES!

Your VERA Plus Home Controller can meet many different needs depending on the accessories you add to it:

• Build a security system by adding door locks, door/window sensors, motion sensors, wireless video cameras, and sirens.
• Create an energy saving system with thermostats, light dimmers, and AC controllers.
• Set up a home safety monitoring system with smoke detectors, carbon monoxide detectors, and flood detectors.
• Make your life more convenient by connecting garage door openers, light switches, and lawn sprinklers that operate automatically.
• Feel free to combine all these functions into one system!

Technical Specifications

• Communication Protocols: Z‐Wave Plus (500 series chip), ZigBee, Bluetooth LE, 802.11 a/b/g/n/ac Wi-Fi
• RF Frequency: 921.42Mhz ‐ AU/NZ  approved RF for Z‐Wave
• Z‐Wave device type:  Z-Wave controller
• Power Supply: Input: 240VAC, 50-60Hz, Output: DC 12V/1.5A
• Hardware: CPU: 880MHz MIPS SoC, Flash Memory: NAND 128MB, Memory:DDR3 256MB, USB Port: 1 USB 2.0, WAN Port: 1 Gigabit Ethernet
• Operation Range: Up to 40m indoors (with no obstacles)
• Application: Indoor use
• Operation temperature: 5 ~ 40 °C
• Storage temperature: ‐10 ~ 60 °C
• Weight: 300G
• Dimensions: 198mm x 128mm x 33mm 
• Housing: ABS

The radio-controlled Roller Shutter 2 works with motorized roller blinds, Venetian blinds, awnings and gates. The Roller Shutter 2 is powered by a single-phase AC and provides precise positioning of blinds, awnings or gates so they can be set to the position you choose. The module is also equipped with a power metering feature when used with a FIBARO Home Center.

The PHILIO Z-Wave PIR Recessed is a small, battery powered motion sensor designed to be installed within a wall or ceiling.

The Z-WAVE.ME Z-Uno is the first (and only) easy to use developer board that allows you to create your own Z-Wave device!

• Compatible with many Arduino peripherals
• Z-Wave plus certified
• Programmable with simplified C language
• Supports 1-Wire and I2C (Software)

Product Details

The Z-WAVE.ME Z-Uno is the perfect solution for DIY home automation systems. It is made for those who are limited by the existing choice of Z-Wave products and want to extend their smart homes with more sensors and actuators; connect LEDs, buttons, switches, motors or any low voltage sensor (including most compatible Arduino sensors) and write your own code (or sketch)  in simplified C language to create your personalized Z-Wave device.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

• Vera Edge - most popular sensors scales, switches, and dimmers are supported
• Fibaro Home Center 2/Lite - full support from 4.070 (some scales might not be supported)
• Z-Way / RaZberry - full support

SPECS

RF Protocol

• Z‐Wave Plus (500 series chip)

RF Frequency

• 921.42Mhz ‐ AU/NZ  approved RF for Z‐wave

Z-Wave Device Type

• Binary/Multilevel switch,
• Binary/Multilevel sensor, meter

Power

• USB 5V, external 3V, external 7-18V or battery

Hardware

• 28kB Flash memory for sketches
• 2 kB RAM
• 26 GPIO
• 1 USB (serial port)
• 64 kB EEPROM

Operation Range

• Up to 30m indoors (with no obstacles)

Z-Wave Channel Types

• Binary/Multilevel switch,
• Binary/Multilevel sensor, meter

Operation Temperature

• 10 ~ 40 °C

Storage Temperature

• ‐10 ~ 60 °C

Weight

• 10g

Board Dimensions

• 39mm x 20mm x 16mm 

Antenna Length

• 86mm

Unveil your imagination to create

• battery powered in-wall remote switch
• rotary dimmer control
• temperature/soil humidity/luminosity/voltage/distance or any other sensors as well as dry contact sensor or tick counter
• low voltage switch
• IR blaster
• LED driver
• motor driver
• battery powered keypad
• converter from any protocol to Z-Wave (using SPI/UART/I2C/1-wire bus)

Make your own Z-Wave Device

• control any Arduino compatible peripherals
• define your own logic by modifying your sketch
• use Arduino IDE and language to write and upload sketches
• easy to use
• requires no knowledge of Z-Wave protocol
• complete DIY solution

Hardware SPECS

• 28 kB Flash memory for your sketches
• 2 kB RAM available
• Z-Wave RF transmitter at 9.6/40/100 kbps
• 26 GPIO (overlaps with special hardware controllers)
• 4 ADC
• 5 PWM
• 2 UART
• 1 USB (srial port)
• 16 kB EEPROM
• 1 SPI (master or salve)
• 4 IR Controllers, 1 IR learn capability
• 1 TRIAC/ZEROX to control dimer
• 3 Interrupts
• 1 Timer 4 MHz
• I2C (Software)
• 1-Wire (Software)
• 8x6 keypad Scanner (Software)
• 2 service LED, 1 service button
• 1 user test LED

Power Modes

• USB 5 V, external 5 or 3 V, external 7-18 V or battery (via MU-2F connector, included)
• always on, sleeping or FLiRS (Frequently Listening)

Z-Wave Supported features

• Z-Wave Plus compliant
• all Z-Wave frequencies (check availability)
• out of the box support of AES 128 bit Security
• upgrade via USB or radio (Z-Wave OTA)
• Multichannel (10 channels)
• 5 Association groups
• controls switches, dimmers, door locks and scenes
• orks with gateways and/or directly with other Z-Wave devices

Channel Types

• Binary Switch
• Multilevel Switch
• Color Switch
• Binary Sensor
• Multilevel Sensor
• Meter

Antenna

• Antenna type: wire antenna 86 mm for 865-870 MhZ
• Alternative antenna: optional u.fl connector can be soldered (to RF2 pads)

Electrical characteristics

• Digital pin in logical 1: > 2.1 V, leakage current 10 μA
• Digital pin in logical 0: < 0.9 V, leakage current 10 μA or 40–120 μA (with internal pull-up enabled)
• Internal pullup resistor: 15–20 kΩ (at +25°C)
• Digital pin out logical 1: > 2.4 V, max current sourcing 8 mA (16 mA for digital pins 3-6)
• Digital pin out logical 0: < 0.4 V, max current sinking 8 mA (16 mA for digital pins 3-6)
• Total max current sourcing from GPIO pins: 120 mA
• Power consumption on 3.3 V:
  
  • in always listening mode 50 mA
  • in sleep mode 1 mA (about 7 μA if DC-DC is turned off by unsoldering R12)
  • in FLiRS mode 1 mA (about 70 μA if DC-DC is turned off by unsoldering R12)
• Power consumption on 5 V: in always listening mode ∼ 30 mA (can be lowered by using external switching DC-DC)
• Power consumption on 7–18 V: in always listening mode ∼ 35 mA (can be lowered by using external switching DC-DC)
• DC-DC installed:
  
  • 7–18 V → 5 V: NCP1117ST50T3G, max current sourcing from 5V pin 900 mA
  • 5 V → 3 V: MCP1700, max current sourcing from 3V pin 200 mA

Z-Uno power supply

Z-Uno can be powered from 3V (pin 3V3), 5V (pin 5V or USB) or external 7-18V (pin Vin).

Below is the schematics of Z-Uno power supply:

Quick Overview

Fibaro Flood Sensor is a universal, Z-Wave compatible, flood and temperature sensor. Device can be battery (ca. 2 years battery life) or VDC powered (12 or 24 
VDC). Flood alarm is sent to the Z-Wave network devices or additionally to any alarm system controller, through opening a NC contact. 
The device has built in temperature sensor, monitoring temperature of e.g. floor. Fibaro Flood Sensor is designed to be placed on the floor or on a wall with a flood 
sensor probe extended by connected wire. The device has built in LED indicator and acoustic alarm. In addition, the sensor is equipped with a tilt sensor reporting 
tilt or movement to the main controller e.g. when someone has taken the Sensor from its original location. LED diode signals flood, operating mode or the Z-Wave 
network communication range. Fibaro Flood Sensor is sink-proof, which means it drifts on the water surface and keeps on sending alarm signal in case of 
substantial inundation of water.

Product Details

Quick Overview

The FIBARO Keyfob is a battery powered, compact remote controller that allows you to control devices in your Z-Wave network.

Product Details 

The FIBARO Keyfob is a Z-Wave Plus (500 series) compatible, battery-powered, compact remote controller designed to control devices within your Z-Wave network.

With six buttons, which support 30 different actions, the FIBARO Keyfob allows you to control Z-Wave devices within your Z-Wave network and run various scenes defined in your Z-Wave gateway.

Configure actions for one, two, three clicks, holding the button and specific button sequences to suit all your home automation needs.

The FIBARO Keyfob also features a built-in, configurable pin lock system which automatically locks the device after a short period of inactivity (60 seconds by default) which prevents unauthorized control of your home.

Note: This device is currently only compatible with the FIBARO Home Center 2 and FIBARO Home Center Lite Z-Wave gateways. Please ensure that you are running the latest Fibaro firmware (at least 4.120)

Technical Specifications

 The new Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave wireless module which can control two circuits each with a maximum load of 6.5A per channel and 10A total load per circuit. 

The Fibaro Z-Wave Double Switch 2 (FIBEFGS-223) is a smart Z-Wave controller capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.

The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.

This Fibaro Fibaro Z-Wave Double Switch 2 requires 3-wire (including neutral) installation and works with an AC (230V) power supply. 

The Fibaro Z-Wave Double Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

• Raspberry PI with RaZberry Card
• Fibaro Home Controller 2/Lite
• DHS Z-Wave Universal Remote Controller
• DHS Z-Wave Mini Remote Controller

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Please check the maximum load before installing or operating. 
This installation must be done by a certified electrician in Australia and New Zealand.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim, you have to provide installation compliance certificate from your electrician.

 The Fibaro Z-Wave Single Switch 2 is a wireless Z-Wave module which can control appliances or light up to a maximum load of 2.0kW. 

The main differences in the FGS-213 are:

• Z-Wave Plus certification
• Has power monitoring
• 230V powered only (this is the same as the FGS-212)
• No dry contacts - this is important. It means that the new FGS-213 cannot be used to control low voltage systems such as garden lights and irrigation, or where you want a pure volt-free switch such as alarm panels and garage door controls.  If you need device with dry contacts please see zConnect Z-Wave Garage Door Opener or FIBARO Z-Wave Sgl Switch InWall or DHS Z-Wave Sgl Switch InWall

The Fibaro Z-Wave Single Switch 2 is a smart Z-Wave module capable of remotely operating your existing light fittings. It works with Z-Wave enabled controllers (AUS/NZ version) and can be controlled individually or as part of a group in a pre-configured Scene.

The device is designed to operate inside your wall socket and can be easily installed by a qualified electrician.

This Fibaro Z-Wave Single Switch 2 requires 3-wire (including neutral) installation and works with an AC (110-230V) or DC (24-60V) power supply. 

The Fibaro Z-Wave Single Switch 2 also features a secondary switch input which allows it to directly control other associated Z-Wave devices. This means that by turning the switch ON/OFF you can also turn other associated devices ON/OFF even if they are not physically connected to the same Fibaro module. It also enables you to control the local load as part of 2-way and multi-way lighting circuits.

This product integrates with all Australian certified (921.42MHz) Z-Wave controllers including:

• Raspberry PI with RaZberry Card
• Fibaro Home Controller 2/Lite
• DHS Z-Wave Universal Remote Controller
• DHS Z-Wave Mini Remote Controller

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals section.

Please check the maximum load before installing or operating. 
This installation must be done by a certified electrician in Australia and New Zealand.
Before engaging an electrician, check that they provide an electrical compliance certificate.
For warranty claim, you have to provide installation compliance certificate from your electrician.

 The Fibaro Z-Wave In-Wall Dimmer 2 (FGD-212) is the newest version of a popular wireless controller designed to operate behind a wall switch.

The Fibaro Z-Wave In-Wall Dimmer 2 is designed to operate with or without a neutral wire. It may be used as a switch in systems without a neutral wire.

In case of 2-wire connection (no neutral), the Fibaro Z-Wave In-Wall Dimmer 2 may require a minimum load of 50W depending on specifics of the connected load.

When used with a Fibaro Dimmer Bypass 2 it may operate with any compatible (see below) load from 5W. Before committing to buy Fibaro Dimmer Bypass 2 please check if your load can be properly controlled by Fibaro Dimmer 2 without bypass device.

Do not connect this device to a power supply without a load. Only lighting devices may be connected to this device.

As a dimmer it operates with the following loads:

• 230V operated conventional incandescent (from 50W to 250W)
• 230V operated halogen (from 50W to 200W)
• 12 V operated ELV halogen lamps and dimmable LED lamps (with electronic transformers: Trailing and Leading edge type) (from 50W to 200W)
• 12V operated MLV halogen lamps (with ferromagnetic transformers) (from 50W to 225W)
• Dimmable CFL tube lamps with electronic ballast only (from 50W to 200W)

As a switch it operates with the following loads:

• Compact fluorescent lamps with electronic balast
• LED bulbs (power factor >0.7)
• Fluorescent tube lamps with electronic balast

Please note: For loads other than resistive do not exceed a 1.5A current.

This product integrates with all Australian certified (921.42 MHz) Z-Wave and Z-Wave Plus controllers including:

• Vera 3/ Lite / Edge
• Fibaro Home Center 2  / Lite

 Please note: Do not mix the load type (e.g. LED and CFL or a different type of transformers) as it will impede the proper operation of the dimmer. Doing so will void the dimmer's warranty.

Configuring Z-Wave Devices:

Z-Wave devices often have several configurable parameters which you can change using your Vera’s user interface. These parameters can include things such as the length of time a Z-Wave siren remains active for or the type of manual switch connected to a Z-Wave light controller.

Every available configurable parameter is listed in your device’s user manual. In most cases, your device’s default parameters will be suitable to your needs however sometimes it may be necessary to adjust them to optimally use your device. A guide to configuring Z-Wave devices with Vera UI7 is available in the Manuals.

This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.
For warranty claim, you have to provide an installation compliance certificate from your electrician.

The Fibaro Dimmer Bypass 2 (FGB-002) is a supplementary device to the Fibaro Z-Wave Dimmer 2 (FGD212 only) allowing it to control lamps which use at least 5W.

The Fibaro Dimmer Bypass 2 is designed to supportFibaro Z-Wave In-Wall Dimmer 2by enabling it to control and dim lights which draw minimum 5W (e.g LED lighting).

It can be used in case of connecting LED bulbs or energy saving compact fluorescent lamps. Fibaro Dimmer Bypass 2 prevents flickering of the LED lights and glowing of the turned off compact fluorescent lamps. In the case of 2-wire connection, Fibaro Dimmer Bypass 2 allows reducing minimum power of load required by the Fibaro Dimmer 2 for correct operation. Fibaro Dimmer Bypass 2 provides powering of the Fibaro Dimmer 2 in case of controlling the low loads of minimum power down to 5VA (for cosφ>0.5)

Please note: Fibaro Dimmer Bypass 2 can only be used with Fibaro Dimmer 2.

This product must be installed by a qualified electrician.
Before engaging an electrician, check that they provide a warranty and electrical compliance certificate.
For warranty claim, you have to provide an installation compliance certificate from your electrician.

Contactors and Overload Relays are suitable for a large variety of applications in building and in the industrial use such as motor control, heating and ventilating, air conditioning, pumping, lifting equipment, lighting, process power factor correction, etc, ...

The range comprises 4 and 5.5 kW mini-contactors, block contactors up to 560 kW (AC3), installation contractors for domestics and industrial use, bar-mounted contactors, thermal and electronics overload relays, and a wide range of add-on accessories ensuring flexibility and adaptability to customer specifications.

Contactors and Overload Relays are suitable for a large variety of applications in building and in the industrial use such as motor control, heating and ventilating, air conditioning, pumping, lifting equipment, lighting, process power factor correction, etc, ...

The range comprises 4 and 5.5 kW mini-contactors, block contactors up to 560 kW (AC3), installation contractors for domestics and industrial use, bar-mounted contactors, thermal and electronics overload relays, and a wide range of add-on accessories ensuring flexibility and adaptability to customer specifications.

The new sleek and modern VBell™ Video VoIP Intercom is a Smart Home intercom, which includes a high definition camera, as well as a two-way communication sound system, using Voice over IP (VoIP) video-audio transfer technology. This device can be accessed through your smart phone or tablet from any location around the world, and provides a simple way to protect and secure your home.

The VBell™ Video VoIP Intercom can be placed anywhere; in your home, office or workshop. At the touch of a button, the intercom camera can be accessed via an application on your smart device, as well as missed calls can be checked from the log file, and a snapshot image with time stamp will be stored for easy access via the application. No additional fees are required for storage. VBell™ Video VoIP Intercom can be integrated into your home automation system as a standard VoIP device. This smart device feature is a must-have accessory for any homeowner.

Connected Access Control
VBell™ Video VoIP Intercom can communicate with other smart home devices using Ethernet, has relay outputs to control of a door or gate and is powered by 12V DC adapter or PoE (Power over Ethernet).

Mobile App Enabled
VBell™ Video VoIP Intercom comes with free smartphone apps available to download from the Apple and Google Play stores. The apps are very easy to operate and configure.

You can not only immediately engage the video call with a person in front of the intercom, but also see the snapshots taken on previous interactions with your VBell intercom.

Product Range VoIP intercom Black or White 

Smart Switch 6. Smart sockets.

Plug it into any power outlet in your home and that outlet is instantly smarter.

Smart Switch 6 is a smart plug that lets you wirelessly control whatever is plugged into it. You can do that via remote control or a smart phone, and from an automation schedule or from the power outlet itself. Now your wall socket is smarter and connected.

And because it’s truly smart, Smart Switch 6 offers much more than just wireless control.

Wireless control.
Control it via remote from up to 150 meters away from anywhere in the world via a smart phone or tablet. Smart Switch 6 can be controlled using secure and encrypted wireless technology.

Babysitter.
Control whatever is plugged into a Smart Switch 6 via a schedule and ensure that gaming systems and computers aren’t used when they’re not meant to be.

Safety.
Turn your electronics off in the event of an emergency or a hazard. Smart Switch 6 lets you automatically turn off devices, such as leaking air conditioners and fridges, when they fail.

Spend less.
Monitor and understand exactly how much money the devices plugged into Smart Switch 6 are costing you to run, then create a schedule to reduce your electricity bill.

Uncrowded. Uncomplicated.

Plugs that block multiple power outlets aren’t just inconvenient, they’re annoying. Smart Switch 6 has been designed to reduce the possibility of that happening. At only 60 mm / 2.3 inches in size, Smart Switch 6 can be used without blocking the outlet its installed next to.

Perfectly re-engineered.

Smart Switch 6 benefits from nearly a decade’s worth of engineering know-how. But to build something this perfect, we had to start our engineering process from scratch. Designing the Smart Switch 6 wasn’t simply about making improvements, it was about reimaging what the modern home truly needed from a wireless smart plug.

Safe switch.
The home isn’t just where the heart is, it’s where your family should be safest. In the regions where electrical standards allow, Smart Switch 6 prevents objects from being inserted into it via its inbuilt socket protection.

Powerful switch.
Smart Switch 6 can power devices that draw up to 15 amps of power. But safety comes first, so a different Smart Switch 6 has been engineered for every country it’s available in, ensuring that it’s never overpowered and never unsafe.

Updated switch.
Your smart switch will keep getting smarter thanks to Aeotec’s over-the-air firmware updates. Whenever new firmware is released, you’ll be able to update Smart Switch 6 wirelessly.

Protective switch.
Your loved ones are protected and so are your valuables. Smart Switch 6 features inbuilt surge and overcurrent protection helping to prevent your electronics from ever being damaged.

Perfect distance.
Wireless doesn’t mean weak. Smart Switch 6 can communicate with other Z-Wave devices at distances up to 100 meters / 300 feet.

Plug and play.
Anyone can install Smart Switch 6. Plug it into a wall outlet and press the action button on the front. Everything else is handled by your Z-Wave hub.